Samsung CS-15K10ML Manual

Samsung televisión CS-15K10ML

Læs gratis den danske manual til Samsung CS-15K10ML (8 sider) i kategorien televisión. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Samsung CS-15K10ML, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

English - 1

➢The actual configuration of your TV may be different,

depending on your model.

Connection Panel (depending on the model)

cable television

network

Rear Panel

☛Whenever you connect an audio or video system to your

television, ensure that all elements are switched off.

Please be sure to match the color coded input terminals

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the Œ (75 Ω

coaxial socket).

To view television channels correctly, a signal must be

received by the set from one of the sources: an outdoor

aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it

when tuning your television until you obtain a picture that is

both sharp and clear.

Connecting to the SCART Input/Output

The SCART connector is used for equipment, such as a´

VCR, DVD, decoder, satellite receiver, video game device, or

video disc player.

continued...

☛Please be sure to match the color coded input terminals

and cable jacks.

Connecting to the RCA Input

The Œ ( - /AUDIO L R) and ´ (VIDEO) connectors are used

for equipment, such as a camcorder, video disc player, or

video game device.

Connecting Headphones

The ˇ (headphone) jack is used for watching a television

programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage

your hearing.

➢When both the front (or side) AV and rear connectors

are connected to external equipment, the front (or

side) AV receives priority.

COLOR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

ŒAudio input

´Video input

ŒAudio input

ˇHeadphone jack

Front (or Side) Panel

Connecting to the RCA Input

The RCA connectors are used for equipment, such as a¨

VCR, DVD, decoder, satellite receiver, video game device, or

video disc player. (When using the mono equipment, connect

to the AUDIO-L input connector.)

Connecting to the RCA Output

The RCA connectors are used for equipment, such as aˇ

recording VCR or audio system.

➢The actual configuration of your TV may be different,

depending on your model.

Control Panel (depending on the model)

◆You can use the buttons to switch the TV on when it isˇ

in standby mode depending on the model.

◆The ´ ˇand buttons also have the same function as the

œ √ † …/ / / buttons on the remote control.

◆If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the

television.

Front (or Side) Panel

ŒOn-screen menu display

´Volume adjustment

ˇChannel selection

¨Standby indicator

ˆRemote control sensor

ØPower on/off

AA68-03121B-02

English - 2

∏

∏MENU

Used to display the on-

screen menu or return to

the previous menu.

”

” …

…

/ †

†

/ œ

/ √

√

Used to control the

cursor in the menu.

’

’DUAL I-II (option)

Used to select the

sound mode.

˝GAME (option)

Used to enjoy the game

programmed in the TV.

ÔTURBO (option)

Used to select the turbo

sound option.



S.MENU (option)

Used to display the

sound menu.

ÒPRE-CH

Used to switch

repeatedly between the

last two channels

displayed.

ÚVIDEO

Used to display all of the

available video sources.

ÆP /

Used to display the next

or previous stored

channel.

ıINFO

Used to view the

channel information and

setting status you

selected.

˜EXIT

Used to exit from any

display or return to

normal viewing.

¯ENTER

While using the on-

screen menus, press the

ENTER button to

activate (or change) a

particular item.

˘P.SIZE

Used to change the

screen size.

¿SLEEP

Used to select a preset

time interval for

automatic shut off.

¸P.MODE

Used to select the

picture effect.

˛S.MODE (option)

Used to select the

sound effect.

ŒPOWER

Used to switch the TV

on and off.

´Numeric buttons

Used to select channels

directly.

-/--

Used to select a channel

numbered ten or over.

Press this button, then

“

” symbol is

displayed. Enter the

two-digit channel

number.

¨MUTE

Used to switch the

sound off temporarily. To

turn the sound back on,

press the MUTE, , or

button.

ˆ/

Used to increase or

decrease the volume.

ØTV

Used to return to the TV

mode when it is in

external input mode.

➢Operation of remote control may be affected by bright

artificial light near to the TV.

Remote Control

(depending on the model)

Installing Batteries

Remove the cover. Install two AAA

size batteries, then replace the cover.

When the remote control does not

operate normally, check that the “+” and “

” ends of the

batteries are inserted correctly or the batteries are drained.

➢Do not mix battery types, i.e. alkaline and manganese.

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

➢The main voltage is indicated on the rear of the

television and the frequency is 50 or 60Hz.

2Press the button (On/Off) on the front (or side) of the

television.

3Press the POWER button on the remote control to

switch the television on. The programme that you were

watching last is re-selected automatically. If you have

not yet stored any channels, no clear picture appears.

Refer to “Channel - Auto Store” or “Channel - Manual

Store” on page 4.

➢If the television is initially powered on, several basic

customer settings proceed automatically. Refer to

“Function - Plug & Play” on page 3.

4To switch the television off, press the button (On/Off)

on the front (or side) of the television.

Switching the Television On and Off

The television can be placed in standby mode, in order to

reduce power consumption and wear of the cathode ray

tube. Standby mode can be useful when you wish to

interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while

viewing.

The television is in standby mode.

2To switch the television back on, simply press it again.

☛Do not leave the television in standby mode for long

periods of time (when you are away on holiday, for

example). Turn the television off by pressing the

button (On/Off) on the front (or side) of the television. It

is best to unplug the set from the mains and aerial.

Placing the Television in Standby Mode

Produkt Specifikationer

Mærke:	Samsung
Kategori:	televisión
Model:	CS-15K10ML

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung CS-15K10ML stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

televisión Samsung Manualer

Samsung CS21B570EO Manual

29 Marts 2025

Samsung CS29M21PQ Manual

28 Marts 2025

Samsung CS-29Z40PQ Manual

28 Marts 2025

Samsung QA55QN90DAW Manual

26 Marts 2025

Samsung BE60D-H Manual

21 Februar 2025

Samsung UA55NU7100 Manual

21 Februar 2025

Samsung UA55KU7000 Manual

21 Februar 2025

Samsung UA55KU6000 Manual

21 Februar 2025

Samsung UA75NU8000 Manual

21 Februar 2025

Samsung UA75NU7100 Manual

21 Februar 2025

televisión Manualer

Nyeste televisión Manualer

Panasonic Viera TX-L32D28 Manual

9 April 2025

Panasonic TX-L24C5B Manual

9 April 2025

Panasonic TX-24E302B Manual

9 April 2025

Panasonic TX-26LX62FA Manual

9 April 2025

Panasonic TX-24CS500B Manual

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025