Samsung CS-29Z40MH Manual

Samsung Ikke kategoriseret CS-29Z40MH

Læs gratis den danske manual til Samsung CS-29Z40MH (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Samsung CS-29Z40MH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

English - 1

AA68-03796A-04

➢The actual configuration of your TV may be different,

depending on your model.

Control Panel (depending on the model)

◆You can use the buttons to switch the TV on when it is6

in standby mode depending on the model.

◆The 5 6and buttons also have the same function as the

œ √ † …/ / / buttons on the remote control.

◆ If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the

television.

Front (or Side) Panel

1 Remote control sensor

2 Standby indicator

3 Power on/off

4 On-screen menu display

5 Volume adjustment

6 Channel selection

➢The actual configuration of your TV may be different,

depending on your model.

Connection Panel (depending on the model)

cable television network

Rear Panel

☛Whenever you connect an audio or video system to your

television, ensure that all elements are switched off.

Please be sure to match the color coded input terminals

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1(75 Ω

coaxial socket).

To view television channels correctly, a signal must be

received by the set from one of the sources: an outdoor

aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it

when tuning your television until you obtain a picture that is

both sharp and clear.

Connecting to the SCART Input/Output

The SCART and SCART connectors are used for2 3

equipment, such as a VCR, DVD, decoder, satellite receiver,

video game device, or video disc player.

The SCART is also used for equipment with an RGB2

output, such as a video game device or video disc player.

continued...

COLOR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

Connecting to the RCA Output

The RCA6

66 connectors are used for equipment, such as a

recording VCR or audio system.

Connecting to the RCA Input

The RCA and RCA connectors are used for equipment,4 5

such as a VCR, DVD, decoder, satellite receiver, video game

device, or video disc player. (When using the mono

equipment, connect to the input connector.)AUDIO-L

The RCA7

77 connectors are used for equipment such as a

DVD with component output (480i only).

☛Please be sure to match the color coded input terminals

and cable jacks.

Connecting to the RCA Input

The 1( - /AUDIO L R) and 2(VIDEO) connectors are used

for equipment, such as a camcorder, video disc player, or

video game device.

Connecting to the S-VIDEO Input

The 3(S-VIDEO IN) and 1( - /AUDIO L R) connectors are

used for equipment with an S-Video output, such as a

camcorder or VCR.

1 Audio input

2 Video input

3 S-Video input

Front (or Side) Panel

English - 2

TURBO

Used to select the turbo

sound option.

P.SIZE

Used to change the

screen size.

DUAL I-II

Used to select the

sound mode.

SOURCE

Used to display all of the

available video sources.

INFO

Used to view the

channel information and

setting status you

selected.

PRE-CH

Used to switch

repeatedly between the

last two channels

displayed.

$$ P /

Used to display the next

or previous stored

channel.

EXIT

Used to exit from any

display or return to

normal viewing.

^^ MUTE

Used to switch the

sound off temporarily. To

turn the sound back on,

press the MUTE, , or

button.

ENTER

While using the on-

screen menus, press the

ENTER button to

activate (or change) a

particular item.

S.MODE

Used to select the

sound effect.

(

((

P.MODE

Used to select the

picture effect.

)

))

Used to return to the TV

mode when it is in

external input mode.

SLEEP

Used to select a preset

time interval for

automatic turn off.

11 POWER

Used to switch the TV

on and off.

22 Numeric buttons

Used to select channels

directly.

-/--

Used to select a channel

numbered ten or over.

Press this button, then

“

” symbol is

displayed. Enter the

two-digit channel

number.

44 /

Used to increase or

decrease the volume.

Used to display the on-

screen menu or return to

the previous menu.

…

……

/ †

†

††

/ œ

œœ

/ √

√

√√

Used to control the

cursor in the menu.

S.MENU

Used to display the

sound menu.

➢Operation of remote control may be affected by bright

artificial light near to the TV.

Remote Control (depending on the model)

Installing Batteries

Remove the cover. Install two AAA

size batteries, then replace the cover.

When the remote control does not

operate normally, check that the “+”

and “

” ends of the batteries are inserted correctly or the

batteries are drained.

➢Do not mix battery types, i.e. alkaline and manganese.

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

➢The main voltage is indicated on the rear of the

television and the frequency is 50 or 60Hz.

2 IPress the “ ” button (On/Off) on the front (or side) of the

television.

3 Press the POWER button on the remote control to

switch the television on. The programme that you were

watching last is re-selected automatically. If you have

not yet stored any channels, no clear picture appears.

Refer to “Channel - Auto Store” on page 3 or “Channel -

Manual Store” on page 4.

➢If the television is initially powered on, several basic

customer settings proceed automatically. Refer to

“Setup - Plug & Play” on page 3.

4To switch the television off, press the “I” button (On/Off)

on the front (or side) of the television.

Switching the Television On and Off

The television can be placed in standby mode, in order to

reduce power consumption and wear of the cathode ray

tube. Standby mode can be useful when you wish to

interrupt viewing temporarily (during a meal, for example).

1 Press the POWER button on the remote control while

viewing.

The television is in standby mode.

2To switch the television back on, simply press it again.

☛Do not leave the television in standby mode for long

periods of time (when you are away on holiday, for

example). Turn the television off by pressing the “I”

button (On/Off) on the front (or side) of the television. It

is best to unplug the set from the mains and aerial.

Placing the Television in Standby Mode

Produkt Specifikationer

Mærke:	Samsung
Kategori:	Ikke kategoriseret
Model:	CS-29Z40MH

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung CS-29Z40MH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Samsung Manualer

Samsung RS51K57H02A Manual

27 Marts 2025

Samsung RS65DG54R3M9 Manual

27 Marts 2025

Samsung RS65CG5691B4 Manual

27 Marts 2025

Samsung RS51K54F02A Manual

27 Marts 2025

Samsung AR18TQHQLSI2TN Manual

12 Januar 2025

Samsung AR18JQFSBWKNMG Manual

11 Januar 2025

Samsung RS78CG8543B1 Manual

11 Januar 2025

Samsung SRS694NLS Manual

11 Januar 2025

Samsung RR22M287YU3 Manual

10 Januar 2025

Samsung MM-DT10 Manual

8 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025