Samsung CS-29Z45MH Manual

Samsung televisión CS-29Z45MH

Læs gratis den danske manual til Samsung CS-29Z45MH (9 sider) i kategorien televisión. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Samsung CS-29Z45MH, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
English - 1
AA68-03796A-04
➢The actual configuration of your TV may be different,
depending on your model.
Control Panel (depending on the model)
◆You can use the buttons to switch the TV on when it is6
in standby mode depending on the model.
◆The 5 6and buttons also have the same function as the
œ √ † …/ / / buttons on the remote control.
◆If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1Remote control sensor
2Standby indicator
3Power on/off
4On-screen menu display
5Volume adjustment
6Channel selection
➢The actual configuration of your TV may be different,
depending on your model.
Connection Panel (depending on the model)
cable television network
Rear Panel
☛Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1(75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART and SCART connectors are used for2 3
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART is also used for equipment with an RGB2
output, such as a video game device or video disc player.
continued...
or
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
Connecting to the RCA Output
The RCA6
6
6
6
6connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA and RCA connectors are used for equipment,4 5
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the input connector.)AUDIO-L
The RCA7
7
7
7
7connectors are used for equipment such as a
DVD with component output (480i only).
☛Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1( - /AUDIO L R) and 2(VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting to the S-VIDEO Input
The 3(S-VIDEO IN) and 1( - /AUDIO L R) connectors are
used for equipment with an S-Video output, such as a
camcorder or VCR.
1Audio input
2Video input
3S-Video input
Front (or Side) Panel
English - 2
8
8
8
8
8
TURBO
Used to select the turbo
sound option.
9
9
9
9
9
P.SIZE
Used to change the
screen size.
0
0
0
0
0
DUAL I-II
Used to select the
sound mode.
!
!
!
!
!
SOURCE
Used to display all of the
available video sources.
@
@
@
@
@
INFO
Used to view the
channel information and
setting status you
selected.
#
#
#
#
#
PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
$
$
$
$
$P /
Used to display the next
or previous stored
channel.
%
%
%
%
%
EXIT
Used to exit from any
display or return to
normal viewing.
^
^
^
^
^MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
&
&
&
&
&
ENTER
While using the on-
screen menus, press the
ENTER button to
activate (or change) a
particular item.
*
*
*
*
*
S.MODE
Used to select the
sound effect.
(
(
(
(
(
P.MODE
Used to select the
picture effect.
)
)
)
)
)
TV
Used to return to the TV
mode when it is in
external input mode.
a
a
a
a
a
SLEEP
Used to select a preset
time interval for
automatic turn off.
1
1
1
1
1POWER
Used to switch the TV
on and off.
2
2
2
2
2Numeric buttons
Used to select channels
directly.
3
3
3
3
3
-/--
Used to select a channel
numbered ten or over.
Press this button, then
“
--
” symbol is
displayed. Enter the
two-digit channel
number.
4
4
4
4
4/
Used to increase or
decrease the volume.
5
5
5
5
5
MENU
Used to display the on-
screen menu or return to
the previous menu.
6
6
6
6
6
…
…
…
…
…
/ †
†
†
†
†
/ œ
œ
œ
œ
œ
/ √
√
√
√
√
Used to control the
cursor in the menu.
7
7
7
7
7
S.MENU
Used to display the
sound menu.
➢Operation of remote control may be affected by bright
artificial light near to the TV.
Remote Control
(depending on the model)
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+”
and “
-
” ends of the batteries are inserted correctly or the
batteries are drained.
➢Do not mix battery types, i.e. alkaline and manganese.
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 IPress the “ ” button (On/Off) on the front (or side) of the
television.
3Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel -
Manual Store” on page 4.
➢If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2To switch the television back on, simply press it again.
☛Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode

Produkt Specifikationer

Mærke: Samsung
Kategori: televisión
Model: CS-29Z45MH

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung CS-29Z45MH stil et spørgsmål nedenfor, og andre brugere vil svare dig


televisión Samsung Manualer

Samsung

Samsung 75DU7100 Manual

30 Januar 2025
Samsung

Samsung UA55MU7351K Manual

14 Januar 2025
Samsung

Samsung UA50KU7001K Manual

14 Januar 2025
Samsung

Samsung UA65MU7351K Manual

14 Januar 2025
Samsung

Samsung GQ82Q800TGT Manual

12 Januar 2025
Samsung

Samsung GQ49Q87TGT Manual

12 Januar 2025
Samsung

Samsung UE55AU9002K Manual

12 Januar 2025
Samsung

Samsung GQ48S94DAE Manual

10 Januar 2025
Samsung

Samsung LS15S13C Manual

8 Januar 2025
Samsung

Samsung UA60F6100AR Manual

2 Januar 2025

televisión Manualer

Nyeste televisión Manualer

Thomson

Thomson 40FA2S13 Manual

20 Februar 2025
Continental Edison

Continental Edison CELED65SVQLD25B6 Manual

19 Februar 2025
Continental Edison

Continental Edison CELED32SVHD25B6 Manual

19 Februar 2025
TCL

TCL 55P8K Manual

10 Februar 2025
Thomson

Thomson 32FG2S14 Manual

5 Februar 2025
TCL

TCL 85C75B Manual

30 Januar 2025
Philips

Philips 32HFL2889T Manual

15 Januar 2025
Philips

Philips 25CE6270 Manual

15 Januar 2025
Grundig

Grundig st 84 899 dolby Manual

15 Januar 2025
Daewoo

Daewoo dtz 29u7 Manual

15 Januar 2025