Samsung CS-29Z50MV Manual

Samsung Ikke kategoriseret CS-29Z50MV

Læs gratis den danske manual til Samsung CS-29Z50MV (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Samsung CS-29Z50MV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

English - 1

AA68-03272E-00

➢The actual configuration of your TV may be different,

depending on your model.

Control Panel (depending on the model)

◆You can use the buttons to switch the TV on when it is¨

in standby mode depending on the model.

◆The ˇ ¨and buttons also have the same function as the

œ √ † …/ / / buttons on the remote control.

◆If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the

television.

Front (or Side) Panel

ŒInput source selection

´On-screen menu display

ˇVolume adjustment

¨Channel selection

ˆStandby & Timer indicator

ØRemote control sensor

∏Power on/off

➢The actual configuration of your TV may be different,

depending on your model.

Connection Panel (depending on the model)

cable television

network

Rear Panel

☛Whenever you connect an audio or video system to your

television, ensure that all elements are switched off.

Please be sure to match the color coded input terminals

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the Œ (75 Ω

coaxial socket).

To view television channels correctly, a signal must be

received by the set from one of the sources: an outdoor

aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it

when tuning your television until you obtain a picture that is

both sharp and clear.

Connecting to the SCART Input/Output

The SCART and SCART connectors are used for´ ˇ

equipment, such as a VCR, DVD, decoder, satellite receiver,

video game device, or video disc player.

The SCART is also used for equipment with an RGB´

output, such as a video game device or video disc player.

continued...

ŒAudio input

´Video input

ˇS-Video input

¨Headphone jack

Front (or Side) Panel

☛Please be sure to match the color coded input terminals

and cable jacks.

Connecting to the RCA Input

The Œ ( - /AUDIO L R) and ´ (VIDEO) connectors are used

for equipment, such as a camcorder, video disc player, or

video game device.

Connecting to the S-VIDEO Input

The ˇ (S-VIDEO) and Œ ( - /AUDIO L R) connectors are used

for equipment with an S-Video output, such as a camcorder

or VCR.

Connecting Headphones

The ¨ (headphone) jack is used for watching a television

programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage

your hearing.

➢When both the front (or side) AV and rear connectors

are connected to external equipment, the front (or

side) AV receives priority.

Connecting to the RCA Input

The RCA and RCA connectors are used for equipment,4 5

such as a VCR, DVD, decoder, satellite receiver, video game

device, or video disc player. (When using the mono

equipment, connect to the input connector.)AUDIO-L

The RCA connectors are used for equipment such as a7

DVD with component output (480i only).

Connecting to the RCA Output

The RCA connectors are used for equipment, such as a6

recording VCR or audio system.

Connecting to the Woofer

The WOOFER 8connector is used for connecting the

woofer box (to take full advantage of low frequency

response).

COLOR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

English - 2

˝GAME

Used to enjoy the game

programmed in the TV.

ÔTURBO

Used to select the turbo

sound option.

CH.SCAN

Press to have the TV

automatically scan all of

the channels it has

memorized.

ÒPRE-CH

Used to switch

repeatedly between the

last two channels

displayed.

ÚVIDEO

Used to display all of the

available video sources.

ÆP /

Used to display the next

or previous stored

channel.

ıINFO

Used to view the

channel information and

setting status you

selected.

˜EXIT

Used to exit from any

display or return to

normal viewing.

¯ENTER

While using the on-

screen menus, press the

ENTER button to

activate (or change) a

particular item.

˘P.SIZE

Used to change the

screen size.

¿SLEEP

Used to select a preset

time interval for

automatic turn off.

¸P.MODE

Used to select the

picture effect.

˛S.MODE

Used to select the

sound effect.

◊S.MENU

Used to display the

sound menu.

ŒPOWER

Used to switch the TV

on and off.

´Numeric buttons

Used to select channels

directly.

-/--

Used to select a channel

numbered ten or over.

Press this button, then

“

” symbol is

displayed. Enter the

two-digit channel

number.

¨MUTE

Used to switch the

sound off temporarily. To

turn the sound back on,

press the MUTE, , or

button.

ˆ/

Used to increase or

decrease the volume.

ØTV

Used to return to the TV

mode when it is in

external input mode.

∏MENU

Used to display the on-

screen menu or return to

the previous menu.

”…

…

/ †

†

/ œ

/ √

√

Used to control the

cursor in the menu.

’DUAL I-II

Used to select the

sound mode.

➢Operation of remote control may be affected by bright

artificial light near to the TV.

Remote Control

(depending on the model)

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

➢The main voltage is indicated on the rear of the

television and the frequency is 50 or 60Hz.

2Press the button (On/Off) on the front (or side) of the

television.

3Press the POWER button on the remote control to

switch the television on. The programme that you were

watching last is re-selected automatically. If you have

not yet stored any channels, no clear picture appears.

Refer to “Channel - Auto Store” or “Channel - Manual

Store” on page 4.

➢If the television is initially powered on, several basic

customer settings proceed automatically. Refer to

“Setup - Plug & Play” on page 3.

4To switch the television off, press the button (On/Off)

on the front (or side) of the television.

Switching the Television On and Off

The television can be placed in standby mode, in order to

reduce power consumption and wear of the cathode ray

tube. Standby mode can be useful when you wish to

interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while

viewing.

The television is in standby mode.

2To switch the television back on, simply press it again.

☛Do not leave the television in standby mode for long

periods of time (when you are away on holiday, for

example). Turn the television off by pressing the

button (On/Off) on the front (or side) of the television. It

is best to unplug the set from the mains and aerial.

Placing the Television in Standby Mode

Installing Batteries

Remove the cover. Install two AAA

size batteries, then replace the cover.

When the remote control does not

operate normally, check that the “+”

and “

” ends of the batteries are

inserted correctly or the batteries are

drained.

➢Do not mix battery types, i.e.

alkaline and manganese.

Produkt Specifikationer

Mærke:	Samsung
Kategori:	Ikke kategoriseret
Model:	CS-29Z50MV

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung CS-29Z50MV stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Samsung Manualer

Samsung AR50F24D1DHXAP Manual

16 Juli 2025

Samsung RR24T275YCU Manual

15 Juli 2025

Samsung AR70F12D1BBXAP Manual

15 Juli 2025

Samsung MHC-300FP Manual

15 Juli 2025

Samsung AR18HSFSJWK Manual

15 Juli 2025

Samsung AS09FCN Manual

15 Juli 2025

Samsung LE40A569P4W Manual

15 Juli 2025

Samsung MAX-VN52 Manual

15 Juli 2025

Samsung LE37A436T1C Manual

15 Juli 2025

Samsung RA19AHTS1 Manual

15 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Asrock Rack SPC621D8 Manual

16 Juli 2025

For.A FA-10DCCRU Manual

16 Juli 2025

CYP AU-DTO4-RX Manual

16 Juli 2025

Levenhuk Zeno Lamp ZL23 Manual

16 Juli 2025

Motorola MiT3000 Manual

16 Juli 2025

Hillvert HT-PT-360 Manual

16 Juli 2025

CYP PUV-1610RX Manual

16 Juli 2025

Rockville RM50RT-B Manual

16 Juli 2025

DS18 RCNLP/BK Manual

16 Juli 2025

CYP EL-7500V Manual

16 Juli 2025