Sanus BSA-IWP701 Manual

Sanus Ikke kategoriseret BSA-IWP701

Læs gratis den danske manual til Sanus BSA-IWP701 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Sanus BSA-IWP701, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Verify Wall Compatibility

This Cable Kit is designed to ﬁt into both

interior and exterior walls constructed with:

Minimum Space into Wall: 3 in.

Minimum Drywall Thickness: 1/2 in.

Verify TV Plug Fit

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

CAUTION: Avoid potential personal injuries and property damage!

● Please read through these instructions completely to be sure you’re comfortable with this easy install process.

● Do not use this product for any purpose not explicitly specified by manufacturer.

● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

● If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact

customer service at 1-800-359-5520.

Tools Needed

Tape Measure

This product conforms to and should be properly grounded in compliance with requirements of the current National Electrical Code or

codes administered by local authorities.

All electrical products may present a possible shock or ﬁre hazard if improperly installed or used. This product may bear the mark of a

Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.

WARNING: RISK OF FIRE AND SHOCK. Do not connect the modules

to any other circuits or outlets.

CAUTION: RISK OF FIRE AND SHOCK. ONLY intended for use on 15 ampere branch circuits. Do not install power supply cord

within wall cavity.

Pencil Phillips Screwdriver

Paint (optional)

Surfaces are paintable

to match your decor

Electric Drill

WARNING: This product contains small items that could be a choking

hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are

missing or damaged, do not return the damaged item to your dealer; contact Customer

Service. Never use damaged parts!

MAX

1 ⅛ in. (29 mm)

BEFORE DRILLING ANY HOLES:

Make sure your TV plug ﬁts in the upper

module

Legrand AV Inc. and its aliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the

information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The

information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the

information contained herein. Legrand assumes no responsibility for accuracy, completeness or suciency of the information contained in this document.

Legrand AV Inc. 6436 City West Parkway; Eden Prairie, MN 55344 USA

STEP 1

Upper Module

Driver Bit

(hole saw)

Hole Saw

3 in.

Lower Module

Power Cord

Assemble

Hole Saw

Drill Holes