Sanus CFR2127 Manual


Læs gratis den danske manual til Sanus CFR2127 (21 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 65 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 33 anmeldelser. Har du et spørgsmål om Sanus CFR2127, eller vil du spørge andre brugere om produktet?

Side 1/21
CFR2115, CFR2127, CFR2136, CFR2144
Instruction Manual
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
Scan for more information
san.us/891
2
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the
damaged item to your dealer; contact Customer Service. Never use damaged parts!
Supplied parts are located inside of the rack. To access the parts, remove the back panel.
Thank you for choosing a Sanus Component Series Rack. The CFR2100 series is designed to support audio/video equipment.
The total weight capacity for the CFR2100 series:
CFR2115 226.8 kg (500 lb)
CFR2127 340.2 kg (750 lb)
CFR2136 385.5 kg (850 lb)
CFR2144 453.6 kg (1,000 lb)
Each 2U shelf supports up to 22.6 kg (50 lb), and each 1U shelf supports up to 13.6 kg (30 lb).
Each optional 3U shelf supports up to 36.2 kg (80 lb).
CAUTION: Avoid potential personal injuries and property damage!
Do not exceed the stated weight capacities.
Do not shake, tilt, rock, sit, stand, or climb on your Component Series Rack. Tipping may cause injury or death.
Do not move large racks by yourself; due to weight and height, assistance is required.
To avoid instability do not pull out more than one optional drawer or slide out equipment at a time.
Before moving, make sure all optional drawers and slide out equipment are secured and door is closed and secured.
Use extreme caution when moving a loaded rack! Push, DO NOT pull, loaded rack slowly over a short, smooth, level distance. Avoid
sudden starts and stops to minimize the strain placed on casters.
Do not use this product for any purpose not explicitly specified by manufacturer.
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product,
contact manufacturer Customer Service or call a qualified contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
NOTE: Due to continuous product improvement, images shown in this manual may vary from actual product.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE
Do you have all of the tools needed?
Unpacking


Produkt Specifikationer

Mærke: Sanus
Kategori: Ikke kategoriseret
Model: CFR2127

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanus CFR2127 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Sanus Manualer

Sanus

Sanus CFR535DS Manual

27 August 2025
Sanus

Sanus CFR535DR Manual

26 August 2025
Sanus

Sanus CFR518DR Manual

26 August 2025
Sanus

Sanus BXF330-G1 Manual

12 August 2025
Sanus

Sanus CFR518 Manual

8 Juli 2025
Sanus

Sanus CFR115 Manual

8 Juli 2025
Sanus

Sanus CFR518RR Manual

2 April 2025
Sanus

Sanus CFR518DP Manual

1 April 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Arktic

Arktic 943526 Manual

4 September 2025
Panamax

Panamax SP8-AV Manual

4 September 2025
Panamax

Panamax PM8DBS-EX Manual

4 September 2025
Melchioni

Melchioni ARTIC 47 Manual

4 September 2025
DeWalt

DeWalt DE0734 Manual

4 September 2025
AMX

AMX NMX-ENC-N1122 Manual

4 September 2025
AMX

AMX NMX-DEC-N2625-WP Manual

4 September 2025
HP

HP Engage One Pro AIO Manual

4 September 2025
SmallRig

SmallRig P20 Manual

4 September 2025
AMX

AMX NMX-DEC-N2212 Manual

4 September 2025