Sanus VMpa2632 Manual

Sanus Ikke kategoriseret VMpa2632

Læs gratis den danske manual til Sanus VMpa2632 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Sanus VMpa2632, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Assembly Instructions for VMpa2632 Adapter

Thank you for choosing a Sanus Systems Vision Mount product. The VMpa2632 is designed for the Panasonic TV models; TC-26LX20

and the TC-32LX20. It is meant to be used exclusively with the VM200, VM300 or VM400 wall mount.

Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualiﬁed

contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective

parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replace-

ment parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Improper instal-

lation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly speciﬁed by Sanus Systems.

Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call

Sanus Systems before returning products to the point of purchase.

Required Tools: Phillips screw driver and wrench or socket set.

Parts and Hardware:

(1) Adapter Plate - a

(4) M6 Lock Nut - b (4) M6 Bolt - c

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7.05.05 (6901-100136)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7.05.05 (6901-100136)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Step 1: Add Adapter Plate to VM200 Monitor Brackets

Before attaching them to the Adapter Plate (a), orient the Monitor Brackets so that hooks are on the top and the knobs are facing

outward as seen in Diagram 1. Insert a M6 Bolt (c) through a slot in the Monitor Bracket, a hole in the center part of the Adapter Plate

and a M6 Lock Nut (b) as shown in Diagram 1. Repeat process until both Monitor Brackets are secured to the Adapter Plate. Make

sure the bolts are tight.

Diagram 1

hook

knob

a c

monitor bracket

Step 2: Attach Adapter to TV

Follow the Hardware selection process detailed in the VM200 Instruction Manual. Once you have picked out the correct hardware,

use the outer holes of the Adapter Plate (a) to attach it to the TV as shown in Diagram 2. Proceed to tighten each bolt with a phillips

screw driver.

Diagram 2

Note: Sanus recommends Monitor Brackets

being centered vertically on the Adapter Plate.

Produkt Specifikationer

Mærke:	Sanus
Kategori:	Ikke kategoriseret
Model:	VMpa2632

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanus VMpa2632 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sanus Manualer

Sanus CFR518RR Manual

2 April 2025

Sanus CFR518DP Manual

1 April 2025

26 Januar 2025

26 Januar 2025

26 Januar 2025

7 Januar 2025

4 Januar 2025

Sanus SA-IWBIWP1 Manual

4 Januar 2025

Sanus FPA400 Manual

28 December 2024

Sanus VuePoint FPA400 Manual

28 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 304090 Manual

16 Juni 2025

Toorx SRX-85 Manual

16 Juni 2025

Cable Matters 180070 Manual

16 Juni 2025

Philips Avent SCD252 Manual

16 Juni 2025

Philips Q-Line 55BDL2050Q Manual

16 Juni 2025

EFX Delta DUDB4 Manual

16 Juni 2025

Foster Prep Station PS1000HR Manual

16 Juni 2025

OmniMount OBT60 Manual

16 Juni 2025

XO D34HPBF Manual

16 Juni 2025

Janitza 800-DI14 Manual

16 Juni 2025