Sanyo Xacti VPC-WH1 Manual
Sanyo
Videokamera
Xacti VPC-WH1
Læs gratis den danske manual til Sanyo Xacti VPC-WH1 (203 sider) i kategorien Videokamera. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Sanyo Xacti VPC-WH1, eller vil du spørge andre brugere om produktet?
Side 1/203
VPC-WH1EX
VPC-WH1
VPC-WH1GX
INSTRUCTION MANUAL
Dual Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-WH1EX, VPC-WH1 and
VPC-WH1GX.
Any information regarding only one of these products will be labeled as such.
iEnglish
Warning
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of
California (USA):
WARNING:
This product contains chemicals, including lead, known to the State of
California to cause cancer, birth defects or other reproductive harm. Wash
hands after handling.
iThis equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
hReorient or relocate the receiving antenna.
hIncrease the separation between the equipment and receiver.
hConnect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
hConsult the dealer or an experienced radio/TV technician for help.
iChanges or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Declaration of Conformity
Model number: VPC-WH1
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
English ii
FOR CANADIAN USERS
iThis Class B digital apparatus complies with Canadian ICES-003.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU
countries and do not apply to countries in other areas of the world.
Your SANYO product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries
and accumulators, at their end-of-life, should be disposed of separately from
your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical
symbol means that the battery or accumulator contains a heavy metal at a
certain concentration. This will be indicated as follows: Hg: mercury, Cd:
cadmium, Pb: lead
In the European Union there are separate collection systems for used
electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/
recycling centre.
Please, help us to conserve the environment we live in!
FOR RUSSIAN USERS
This product is certified by an official certification company
which is authorized by the Russian Federation.
SANYO FISHER Sales (Europe) GmbH
Stahlgruberring 4, D-81829 München, Germany
SANYO Electric Co., Ltd.
1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan
iii English
HOW TO READ THIS MANUAL
For first-time users
Please read the sections on “SETUP” and “SIMPLE” in this manual,
as well as the included “QUICK GUIDE” to familiarize yourself with
your camera’s operation.
↓
To use the various camera features
Please read the sections on “NORMAL” and “OPTION SETTINGS” in
this manual. To view on a TV, please read the section on “OTHER
DEVICES AND CONNECTIONS” in this manual. To connect to a
computer, please see the “Xacti Software CD INSTRUCTION
MANUAL”.
↓
To use additional features
To use a computer to edit the recorded data or to save data to a DVD,
please read the “Xacti Software CD INSTRUCTION MANUAL”.
You may find the answers to questions or problems concerning camera
operation in the sections “COMMONLY ASKED QUESTIONS” (page 146)
and “TROUBLESHOOTING” (page 154).
Symbols used in this manual
HINT Points giving some extended instructions or special points to pay
attention to.
CAUTION Points that require special attention.
(page xx) Refer to the page indicated for detailed information.
English iv
SHOOT, PLAY BACK AND SAVE
Preparing the camera
1 Connect the AC adaptor to the camera.
DC IN 5V
1
2
2Open the DC IN terminal cover.
To power outlet
AC adaptor
1Unlock the DC IN terminal cover.
vEnglish
SHOOT, PLAY BACK AND SAVE
Shooting
1 Press the ON/OFF button
for at least 1 second to turn
the camera on.
hIf the screen to set the
date and time appears,
press the MENU button 2
times to cancel it.
For how to set the date
and time, see page 34.
2 Record.
To record a video clip:
hPress the [ ] button to
begin recording a video
clip.
hPress the [ ] button
again to end the
recording.
To take a photo:
hPress the [ ] button.
hA still image is captured.
1031 00:55:58
HD-SHQ
2
M
ON/OFF
button
[ ]
button
[ ] button
MENU button
English vi
Before capturing those important shots, be sure to first take a
test shot to confirm that your camera is set up and ready to go
i
Sanyo declines any claim for compensation for recorded contents etc. in case
of photographing or recording failure due to a chance camera or card flaw.
Playback
1
Press the REC/PLAY
button.
h
The display changes to
the Playback Screen.
2
Select the image to play
back.
hUse the arrow keys to
move the orange frame
to the image you wish to
play back.
hThe image information
for the framed image is
shown at the bottom of
the screen.
100-0006
10.2MB 00:00:08
HD-SHQ
OK
Arrow keys
REC/PLAY button
Orange frame
SET button
vii English
SHOOT, PLAY BACK AND SAVE
3 Press the SET button.
<Video clip playback>
hPlayback begins.
<To return to the recording mode>
hPress the REC/PLAY button.
When you are finished using the camera...
Press the ON/OFF button for at least 1 second to turn the camera off.
To continue to the next operation...
Please confirm that your computer is connected to the Internet.
English viii
Burn your recorded video clips onto a DVD
(Windows Vista)
Using the supplied CD-ROM (Xacti Software CD), you can store your
captured images on a DVD. Detailed information about the Xacti
Software CD can be found on page 4 in the Xacti Software CD
INSTRUCTION MANUAL.
Install application program
1 Set the supplied CD-ROM in your computer’s DVD drive.
hThe installation window opens.
2 Click on [TotalMedia Extreme for SANYO].
hAfter clicking on the application program, follow the instructions shown
on the monitor to install the program.
hWhen the window appears requesting to restart your computer, click
the [Finish] button to reboot.
3 Remove the CD-ROM from the computer’s DVD drive.
ix English
SHOOT, PLAY BACK AND SAVE
Open the card slot cover
UNLOCK
1
2
2Open the card slot cover
1With the card slot cover lock pushed toward the [UNLOCK]
side...
English x
Connect your camera to a computer
Connect your camera to a computer, and copy the desired files to the
computer.
1 Use the supplied dedicated USB interface cable to connect your
camera to the computer.
2 Turn on the camera.
hThe USB Connection Screen appears on the camera’s monitor.
USB CONNECTION
OK
COMPUTER
PRINTER
CANCEL
CANCEL
To USB connector on the
computer
Supplied dedicated USB
interface cable
To USB/AV terminal
xi English
SHOOT, PLAY BACK AND SAVE
3 Select “COMPUTER”, and press the SET button.
hThe screen to select the computer connection mode appears.
4 Select “CARD READER”, and press the SET button.
hThe message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
hThe card is recognized (mounted) as a disk, and the [XACTI (E:)] icon
appears in the [My Computer] window.
hThe drive name (E:) may be different on your computer.
5 Copy the files from the card to the computer’s hard disk.
hThe data recorded with your camera are stored in the following folder.
You can specify the folder on the hard disk to which to copy the files.
XACTI (E:)\DCIM\***SANYO
(*** represents numbers [page 12 in the Xacti Software CD
INSTRUCTION MANUAL]).
hThe drive name (E:) may be different on your computer.
HINT
iFor information on how to copy all the camera’s still image and video clip
files at once, please see the support pages at the website below:
http://www.sanyo-dsc.com/
English xii
Burn video clips onto a DVD (For Windows Vista
users)
Here’s how to write your recorded data onto a DVD in the mpeg2 format. For
information on other operations, please see the Help file for TotalMedia
Extreme. To access the TotalMedia Extreme Help file, click the [?] Help button
on the TotalMedia Extreme start screen.
1 Insert a blank DVD in your computer’s DVD drive.
2 Double-click the [TotalMedia Extreme] icon on your desktop.
hThe TotalMedia Extreme application starts, and the startup page
appears.
[Create video] icon
English 76
SIMPLE/PLAYBACK
DELETING FILES
You can delete files if you no longer need them. You can delete single files,
selected files or all the files at one time.
Delete single/delete all
1 Display the SIMPLE Mode
Playback Menu (page 39), select
the delete setting, and press the
SET button.
DELETE SINGLE:
Deletes one file at a time.
DELETE SELECTED:
Deletes the selected files
(page 77).
DELETE ALL:
Deletes all files.
2 Select the desired delete mode, and press the SET button.
h The Delete Confirmation Screen appears.
<DELETE SINGLE>
h Press [G H] or [ ] to select the file you wish to delete.
h There is no confirmation screen when deleting single files. Please
make sure that the displayed image is one you wish to delete.
<DELETE ALL>
h Press [G H] or [ ] to confirm the files to delete.
SET
DELETE
DELETE SINGLE
DELETE SELECTED
DELETE ALL
OK
77 English
DELETING FILES
3 Select “DELETE”, and press the SET button.
<DELETE SINGLE>
hThe currently displayed file is deleted.
hTo delete other files, select the files, select “DELETE” and press the
SET button.
<DELETE ALL>
hThe Delete Confirmation Screen again appears. To delete the files,
select “YES”, and press the SET button. When file delete is
completed, “No image” is shown.
Delete selected
Delete selected files.
1 Display the SIMPLE Mode Playback Menu (page 39), select the
delete setting, and press the SET button.
2 Select “DELETE SELECTED”,
and press the SET button.
hThe screen to select files to
delete appears.
3 Select an image you wish to delete.
hUse the arrow keys to move the orange frame to the file you wish to
delete.
10.1MB 00:00:08
HD-SHQ
/
20 0 9.1 2.2 4 20 :28 1 00- 000 6
SET
DELETE OK
English 80
SIMPLE/PLAYBACK
Selecting the playback folder
If the card contains multiple folders, you can select from which folder you
would like to play back.
1 Display the Playback Screen.
2 Push the zoom switch toward the
[W/P] side twice.
hThe screen to select the
playback folder appears.
hIf the zoom switch is pushed
toward the [T/]] side, the
camera changes to the 21-image
display (page 79).
3 Press [J] or [I] to move the orange
frame to the desired folder, and press
the SET button.
hThe files in the selected folder are
displayed in the Playback Screen.
HINT
In the NORMAL mode
iWhen you select “SELECT FOLDER” from the NORMAL Mode Playback
Menu and press the SET button, the screen to select the playback folder
appears.
100SANYO
101SANYO
102SANYO
SET
SELECT FOLDER
OK
English 82
NORMAL/SHOOTING
NORMAL
SHOOTING
NORMAL/SHOOTING
RECORDING MENU 1
Video setting
You can record video clips in either the HD mode (16:9 horizontal to vertical
aspect ratio) or the SD mode (4:3 aspect ratio). In addition, the higher the
frame rate number, the smoother playback will be. However, as with the
recording size, the file size is also proportionately larger, using up more
memory. This menu is also used when making audio recordings.
CAUTION
When editing video clips...
iIn order for video clips to be joined, they must have been photographed in
the same mode.
iVideo clips that were photographed in different modes cannot be joined.
Audio recording
k
k
k
kk Audio recording
1 Select <, and press the SET
button.
hThe audio recording mode is
enabled.
hThe menu display is canceled if
the MENU button is pressed.
1007 61:36:26
2
M
Remaining time
Produkt Specifikationer
| Mærke: | Sanyo |
| Kategori: | Videokamera |
| Model: | Xacti VPC-WH1 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sanyo Xacti VPC-WH1 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Videokamera Sanyo Manualer
16 August 2024
16 August 2024
14 August 2024
11 August 2024
10 August 2024
8 August 2024
3 August 2024
3 August 2024
2 August 2024
2 August 2024
Videokamera Manualer
- Kinefinity
- Contax
- Teslong
- Milwaukee
- Hama
- Mediacom
- Nikkei
- SeaLife
- Intenso
- Veho
- Curtis
- Konica-Minolta
- Dragon Touch
- Genius
- Agfa
Nyeste Videokamera Manualer
4 August 2025
4 August 2025
4 August 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025