Do not pull, twist, or wrap the power cord around appliance.
Do not pour the rest water from the gullet when humidier
connected to power supply.
When wash humidier, avoid leaking the water into the inner
parts of humidier otherwise the spare part will be humid and
cause problem.
When switch on the appliance, do not touch the energy-
exchanger.
Operate the appliance only with water in the tank. Do not add
water over 40 ºC into the water tank, or use it for cleaning, to
avoid possible deformation or discoloring.
Take the humidier under bottom and support water tank when
handle.
Do not add water through the mist outlet.
Do not add water directly to the water channel on the base.
Do not add metals or chemicals into the water tank and the
water channel on the base.
Avoid water freezing in the humidier.
Do not lift the water tank while the humidier is working.
Do not pour water from the water channel when humidier
connected to power supply. Otherwise the energy exchanger
will immediately break.
Do not place humidier close to the ventilating hole and keep
away from the furniture and other electrical appliances.
If the unit was got from the environment with temperature < 0
ºC, keep it under the room conditions at least 2 hours.
ATTENTION: unplug the device from the socket before lling or
cleaning.
NOTE. During operation it is acceptable that white bloom occurs
on the nearby objects which is caused by high-salinity water
being used, in this case we it is recommended to fulter the water
before pouring it to water tank of the device.
The manufacturer reserves the right to introduce minor changes into the product design without prior
notice, unless such changes inuence signicantly the product safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in
the following format XX.XXXX where first two gures XX is the month of production, and following four
gures XXXX is the year of production.
OPERATION
This appliance is used for indoors air humidifying
Place the device on an even dry surface.
ATTENTION: Before pouring water inside, unplug the device
