Scosche SAVW-6 Manual


Læs gratis den danske manual til Scosche SAVW-6 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Scosche SAVW-6, eller vil du spørge andre brugere om produktet?

Side 1/1
1. Use the adaptor bracket (with slot located at the top) as a template to mark and drill
mounting holes securing speaker to adaptor bracket as shown here. before
2. Place supplied speed clips over mounting holes with the flat sides out.
3. Connect speaker wires to new speaker. Feed wires through slot in top of bracket.
Secure speaker to bracket using hardware supplied and connect wires to
vehicle speaker wires.
Note: See wiring instructions in the Crutchfield for your particular vehicle.MasterSheet
Speaker Adaptor Bracket
142 SAVW6
Parts
Supplied:
4
(2) Brackets (8) Phillips
Screws
Revision 02/05/14
*142SAVW6*
(8) Speed
Clips
Always be careful when drilling in a vehicle. WEAR EYE
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.
CAUTION:
!
Copyright 2014 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
(8) Nuts (8) Washers (8) Cinch
Screws
Slot
(for wires)
Drill new mounting holes
and place speed clips
over holes.
Tools Required
Phillips
Screwdriver
Drill &
1/8” Bit
1/4" Wrench
4


Produkt Specifikationer

Mærke: Scosche
Kategori: Ikke kategoriseret
Model: SAVW-6

Har du brug for hjælp?

Hvis du har brug for hjælp til Scosche SAVW-6 stil et spørgsmål nedenfor, og andre brugere vil svare dig