Sencor SCR 5000GS Manual

Sencor Dash cam SCR 5000GS

Læs gratis den danske manual til Sencor SCR 5000GS (18 sider) i kategorien Dash cam. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Sencor SCR 5000GS, eller vil du spørge andre brugere om produktet?

Side 1/18
EN 1
EN
Revision 06/2021Copyright © 2021, Fast ČR, a. s.
Important safety instructions
1. Important safety instructions
Please read this user's manual carefully before using the device. It contains
important information concerning safety, use and troubleshooting. Keep the
manual in asafe place for future reference. Should you sell or give the device to
athird party, include the user's manual to ensure the new owner can also become
familiar with the device.
Warning
Protect the display against damage.
Do not use force to connect the USB. Always make sure you are connecting
the USB cable with the device off.
Do not insert connectors into the USB port other than the specified USB
connector with the relevant port size.
Handle the display with care to prevent damage.
Protect the device against impacts. Do not expose the device to extreme
temperatures, direct sunlight etc.
When installing the device, degrease the mounting area on the glass and
make sure the mount is fixed firmly so that the camera does not fall.
Insert the SD card carefully, do not insert the card with force. Make sure the
device is switched off before inserting the microSD card.
Due to awide range of microSD cards on the market, it is not possible to
guarantee full compatibility with all microSD cards available.
Do not expose the device or accessories to dripping or spraying water.
Protect against moisture, dust and impurities. Do not place any containers
with water on the device, for example, vases.
Do not expose the device to sources of heat, for example, sunlight. Do not
set the device on or near an open fire, for example, acandle.
Use adry towel for cleaning. Under no circumstances should benzine,
thinner, ammonia or other similar substances be used.
2 EN
EN
Revision 06/2021Copyright © 2021, Fast ČR, a. s.
Device and controls
2. Device and controls
2.1. Device and controls
1. Status indicator
The blue indicator is on when the camera is on and amemory card is
inserted. It flashes during recording. Red indicator is on when charging.
2. Menu button
It locks the file during recording to prevent erasure.
In addition to recording, it switches cyclically between mode Settings,
General Camera Settings and Settings Off – normal operating mode.
3. Up button
Up direction in the menu, except for the digital zoom menu.
4. Dow n button
Down direction in the menu except for the digital zoom menu.
It turns the microphone on/off during recording.


Produkt Specifikationer

Mærke: Sencor
Kategori: Dash cam
Model: SCR 5000GS

Har du brug for hjælp?

Hvis du har brug for hjælp til Sencor SCR 5000GS stil et spørgsmål nedenfor, og andre brugere vil svare dig