Sennheiser HME 26-II Manual

Sennheiser Headset HME 26-II

Læs gratis den danske manual til Sennheiser HME 26-II (2 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 84 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 42.5 anmeldelser. Har du et spørgsmål om Sennheiser HME 26-II, eller vil du spørge andre brugere om produktet?

Side 1/2
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in Germany, Publ. 07/22, 592833/A02
Quick Guide
Kurzanleitung
Guide de démarrage rapide
Guida rapida
Instrucciones resumidas
Instruções resumidas
Beknopte gebruiksaanwijzing
Krótka instrukcja obsługi
Snabbguide
Kort vejledning
Pikaohje
Σύντο ες οδηγίεςµ
Kısa Kılavuz
Краткая инструкция
快速指南
快速使用指南
요약 안내서
HMD 26-II
HME 26-II
HMD 26-II-600-S
Switching AcitveGard™
Replacing the ear pads
In the box
Single-sided listening Accessories
Wearing the headset
Safety
GuideQuick
Guide
45°
ActiveGard
TM
Limiter
2 cm
OR
OR
2. push
1. press
OFF
ON
HMD 26-II HME 26-II
180°
Left = ActiveGard™ switched on
Right = ActiveGard™ switched off
OR OR
HMD 26-II-600-S
Replacing the headband Cleaning
Specifications
HME 26-II-600
HME 26-II-600(4)*
HME 26-II-100
HME 26-II-100(4)*-P48
dynamic, closed
supra-aural
20 to 18,000 Hz
105 dB SPL at 1 kHz, 1 mW
300 Ω mono/
600 Ω stereo
50 Ω mono/
100 Ω stereo
107 dB SPL at 1 kHz, 1 V 115 dB SPL at 1 kHz, 1 V
127 dB SPL at 1 kHz, 200 mW 128 dB SPL at 1 kHz, 200 mW
< 0.5 % at 1 kHz
approx. 3.9 N
105 dB SPL at 1 kHz, 1 mW
Headphones
THD
Contact pressure
Max. SPL
Ear coupling
Transducer principle
Frequency response
Impedance
Characteristic SPL
ActiveGard™
switched off:
switched on:
ActiveGard™
switched off:
switched on:
Type
Microphone
Transducer principle
Frequency response
Output voltage
Impedance
BMD 424
40 to 16,000 Hz
0.4 mV/Pa at 1 kHz
300 Ω
dynamic, noise-compensating, super-cardioid
Headphones
THD
Contact pressure
Max. SPL
Ear coupling
HMD 26-II-100HMD 26-II-600 HMD 26-II-600S
Transducer principle dynamic, closed
supra-aural
20 to 18,000 HzFrequency response
105 dB SPL at 1 kHz, 1 mW
300 Ω mono/
600 Ω stereo
Impedance 50 Ω mono/
100 Ω stereo
600 Ω mono
Characteristic SPL
ActiveGard™
switched off:
switched on:
ActiveGard™
switched off:
switched on:
107 dB SPL at 1 kHz, 1 V
127 dB SPL at 1 kHz, 200 mW
< 0,5 % at 1 kHz
approx. 3.9 N approx. 3.9 Napprox. 4.0 N
128 dB SPL at 1 kHz,
200 mW
115 dB SPL at 1 kHz, 1 V
105 dB SPL at 1 kHz, 1 mW
Type
Microphone
Transducer principle
Frequency response
Output voltage
Terminating impedance
Max SPL
Supply Voltage
BKE 4-2 | BKE 4-4 - only in variants (*4)
40 to 20,000 Hz
4 mV/Pa ± 2.5 dB
min. 4.7 kΩ
150 dB at 1 kHz, 0.5% THD
5 to 15 V DC
BKE 4-2: pre-polarized condenser microphone, omni-directional
General data
Weight without cable
-15 ˚C to 55 ˚C
-55 ˚C to 70 ˚C
approx. 200 g approx. 200 gapprox. 130 g
Temperature range
storage:
operation:
General data
Weight without cable
-15 ˚C to 55 ˚C
-55 ˚C to 70 ˚C
approx. 200 g
Temperature range
storage:
operation:
Wearing with small headbandsWearing with large headband padding
1 Remove both small headbands.
2 Collapse the split headband.
3 Mount the large headband padding.
1 Peel off the large headband padding.
2 Mount the small headbands.
2 Pull the headband carrefully apart.
BKE 4-4: pre-polarized condenser microphone, cardioid


Produkt Specifikationer

Mærke: Sennheiser
Kategori: Headset
Model: HME 26-II
Bredde: - mm
Dybde: - mm
Højde: - mm
Vægt: 205 g
Brugervejledning: Ja
Produktfarve: Sort
Produkttype: Headset
Pakkedybde: 185 mm
Pakkebredde: 245 mm
Pakkehøjde: 84 mm
Bluetooth: Ingen
Opbevaringstemperatur (T-T): -55 - 70 °C
Driftstemperatur (T-T): -15 - 55 °C
Anbefalet brug: Kontor/Callcenter
Lydtryksniveau (maks.): 127 dB
Impedens: 600 ohm (Ω)
Forbindelsesteknologi: Ledningsført
Harmoniseret systemkode (HS): 85183000
Bæremåde: Headset
Headset type: Binaural
Hovedtelefon frekvens: 20 - 18000 Hz
Hovedkassen højde (udvendigt): 410 mm
Hovedkassens længde (udvendigt): 526 mm
Hovedkassens bruttovægt (udvendigt): 6688.6 g
Hovedkassens bredde (udvendigt): 266 mm
Oprindelsesland: Tyskland
Mikrofonindgangsimpedans: 4700 ohm (Ω)
Mikrofon frekvens: 40 - 20000 Hz
Mikrofonretningstype: Omniretningsbestemt
Produkter pr. hovedkasse (udvendigt): 12 stk
Forsendelseskassens bruttovægt (indvendig): 481.3 g
klirfaktor (THD): 0.5 %
Ørekobling: Supraaural
Akustisk system: Lukket
Drivertype: Dynamisk
Driftsspændingsområde: 5 - 15 V
Åbent kredsløbsspænding: 4
Lydtryksniveau (nominel): 105 dB

Har du brug for hjælp?

Hvis du har brug for hjælp til Sennheiser HME 26-II stil et spørgsmål nedenfor, og andre brugere vil svare dig