SentrySafe SFW205TXC Manual

SentrySafe Vault SFW205TXC

Læs gratis den danske manual til SentrySafe SFW205TXC (12 sider) i kategorien Vault. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om SentrySafe SFW205TXC, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
: SentrySafe.com
: 1-800-828-1438
Alarm Safe Owner’s Manual
Guide du propriétaire pour le coffre-fort à alarme
Manual de propietario de la caja fuerte con alarma
Your SentrySafe Product
Your SentrySafe product has a number of features to keep your
important documents and valuables protected including:
Water Protection UL Classified
Fire Protection Digital Media
Protection
Loud Audible Alarm
THE LOUD AUDIBLE ALARM ALERTS YOU WHEN:
The safe is picked up
or moved
There is an attempt
to pry the door open
The wrong combination
is entered 5 times
Using Your SentrySafe
Alarm Safe
Preparing Your Safe for First Time Use
1
2
3
Remove lock out screw indicated by the
yellow tag on the inside of the door
of the safe.
Remove battery compartment from
inside door and insert 4 AAA alkaline
batteries. DO NOT use rechargeable
batteries or any other type of non-
alkaline battery. Do not mix old and
new batteries. Do not mix alkaline and
standard batteries.
Replace battery compartment.
Using Your Safe
1
2
3
Touch the keypad to wake up the safe.
Enter the 5 digit factory code found on
the back of this owner’s manual.
Turn handle to open safe.
IMPORTANT: Test your code several times before putting
valuables inside.
IMPORTANT: A dual key lock option may be included
in your safe. Using this key can disable/enable entry into
the safe.
IMPORTANT: If you exert too much force on the handle,
the handle will move without moving the bolts. When this
happens, you will hear a ’click.’ DO NOT be alarmed.
This feature is designed to protect the bolts from being
over powered by force. Simply exert force in the opposite
direction (lifting up) until the handle clicks back
into place.
1Close and lock the door of your safe.
Touch the keypad to wake up the safe.
Press: “ ” – “ ” – “ ”0 PROG 9
The alarm indicator will blink every
10 seconds to indicate the alarm has
been activated.
IMPORTANT: Like a home alarm system, the alarm must
be set each time you lock your safe to activate the
audible alert. In the event your alarm is not activated
and 5 wrong code attempts are entered, the safe will
go into delay mode for 2 minutes. No alarm will go off
when moved, jarred or with attempted forced entry.
2
Thank you for choosing SentrySafe to store all your important documents and valuables.
We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.
Water/Fire Resistant Alarm Safe
Setting the Alarm
Turning off the Alarm
If the loud audible alarm on your safe has been triggered:
1
2
Touch the keypad to wake up the safe.
Enter a valid code.
NOTE: You will need to enter your code again to open the safe.
NOTE: The Factory Code (FC) or User Code (UC) must be
entered to program safe settings. A secondary code cannot
be used.
Changing Alarm Sensitivity
You can change the level of sensitivity on your safe alarm from a scale
of zero “0” to “5”. Zero “0” being the least sensitive only responding
to incorrect codes and “5” being the most sensitive to slight
movement of the safe.
1
2
Touch the keypad to wake up the safe.
Press: “ ” – “ ” – “ ” – OR – 0 PROG PROG “ ” (FC) “ ”(UC) “ ”3
Then press OR to program your “ ”, “ ”, “ ”, “ ”, “ ”01234 “ ”5
desired sensitivity.
3
Changing Length of Alarm
You may also change the length of which your alarm will sound once
triggered from 01 to 99 minutes.
1
2
Touch the keypad to wake up the safe.
Press: “ ” – “ ” – “ ” – OR – 0 PROG PROG “ ” (FC) “ ”(UC) “ ”4
Then press any number between 01 and 99 to indicate the
number of minutes you would like your alarm to sound
once triggered.
3
Audible Alarm
Features
The safe is jolted,
hit or jarred
3
FACTORY CODE (FC): The safe will ALWAYS unlock using this 5
digit code (found on the back of this owner’s manual). This code
cannot be deleted or changed.
USER CODE (UC): A 5 digit programmable code of your choosing
that can be changed or deleted.
SECONDARY CODE (SC): A 5 digit programmable code of your
choosing that can be changed or deleted. Can only be
programmed after a user code has been activated.
Programmable Codes
Your SentrySafe comes with 3 types of codes for accessing
your safe. For more information on programming these codes
see the “Programming Safe Features” section of this
owner’s manual.

Produkt Specifikationer

Mærke: SentrySafe
Kategori: Vault
Model: SFW205TXC

Har du brug for hjælp?

Hvis du har brug for hjælp til SentrySafe SFW205TXC stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vault SentrySafe Manualer

SentrySafe

SentrySafe FPW082HTC Manual

1 Oktober 2024
SentrySafe

SentrySafe FPW082KSB Manual

1 Oktober 2024
SentrySafe

SentrySafe S6370 Manual

1 Oktober 2024
SentrySafe

SentrySafe FPW082KS Manual

1 Oktober 2024
SentrySafe

SentrySafe FPW082HSB Manual

1 Oktober 2024
SentrySafe

SentrySafe FPW082E Manual

1 Oktober 2024
SentrySafe

SentrySafe FPW082ES Manual

1 Oktober 2024
SentrySafe

SentrySafe Fire Chest 1160 Manual

1 Oktober 2024
SentrySafe

SentrySafe FHW40300 Manual

1 Oktober 2024
SentrySafe

SentrySafe Fire/Water Chest CHW20101 Manual

1 Oktober 2024

Vault Manualer

Nyeste Vault Manualer

Dometic

Dometic ProSafe MD283 Manual

1 April 2025
Dometic

Dometic ProSafe MD383 Manual

1 April 2025
Dometic

Dometic ProSafe MD408 Manual

1 April 2025
Burg Wächter

Burg Wächter V-PZ 6900 Manual

27 Marts 2025
Phoenix

Phoenix SS0721EP Manual

11 Januar 2025
Phoenix

Phoenix Fire Fighter II FS0442E Manual

11 Januar 2025
Olympia

Olympia GOsafe H20 Manual

11 Januar 2025
SereneLife

SereneLife SLSV45EQG Manual

11 Januar 2025
Kogan

Kogan KADSAFM16LA Manual

8 Januar 2025
MSW

MSW -FPS-02 Manual

31 December 2025