SereneLife SLSBXN850GY Manual

SereneLife Ikke kategoriseret SLSBXN850GY

Læs gratis den danske manual til SereneLife SLSBXN850GY (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om SereneLife SLSBXN850GY, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

www.SereneLifeHome.com

ASSEMBLY INSTRUCTIONS & LAYOUT

Please Note:

• Be sure to check the letters marked on the sides of the bin and align as shown in the images for proper orientation.

• Reference the images on the corresponding page.

1. Lay the rear panel down and start by adding in the side plates.

• First insert the left panel (B) into the rear panel (F), press the rear panel (F) down to secure the left panel (B)

• Then insert the right panel (C) into the rear panel (F), press the rear panel (F) down to secure the right panel (C)

2. Now add the base plate (D)

• First place the base plate (D) on the cushion to avoid scratches, then insert the 4 base pads (L) into the base plate (D).

• Then insert the assembled cabinet down into the slot corresponding to the base panel (D).

3. Finally we add the screws (H)

• First add screws to secure the side panel (B, C, E, F) to the base plate (D), then add screws in the corners to secure the

side panels (B, C, E, F).

• Then align the hinge of the lid and attach with 2 screws on each side.

Box lid

Rear panel

Left panel

Right panel

Front panel

Base plate

Questions? Comments?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.SereneLifeHome.com

HOW TO SET A CUSTOM PASS CODE:

1. Adjust the pin to your current pass code (By default, the lock pin is set to “0000”).

2. Completely remove the top drawer from the cabinet and on the inside of the cabinet switch the lever located on the lock

from the B to A position.

3. While lever is in A position - set the desired new code. Make sure the 4 dials you set are exactly parallel and lined up -

you don’t want to set to the wrong number by mistake. (Sample below).

4. Once your new pass code is entered, change the lever back from A to the B position.

5. Make sure to write down & remember your code.

There is no way to recover it once it is set.

3 4

0 0 0

1 2 3

Produkt Specifikationer

Mærke:	SereneLife
Kategori:	Ikke kategoriseret
Model:	SLSBXN850GY

Har du brug for hjælp?

Hvis du har brug for hjælp til SereneLife SLSBXN850GY stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret SereneLife Manualer

SereneLife SLSHCD101 Manual

19 August 2025

SereneLife SLTLWS750 Manual

11 Juli 2025

SereneLife SLSUPB0106 Manual

5 Juli 2025

SereneLife SLSPT365 Manual

4 Juli 2025

SereneLife SLOHT52 Manual

25 Juni 2025

SereneLife SLBT4GR858 Manual

19 Juni 2025

SereneLife SLBT4RB619 Manual

19 Juni 2025

SereneLife SLBT4GR548 Manual

18 Juni 2025

SereneLife SLBT4GR798 Manual

18 Juni 2025

SereneLife SLBT4GR738 Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025

DAP-Audio DCP-26 MKII Manual

12 September 2025

Vivax MF-45E Manual

12 September 2025