Sharp SKMD30F0AS Manual

Sharp Mikrobølgeovn SKMD30F0AS

Læs gratis den danske manual til Sharp SKMD30F0AS (4 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Sharp SKMD30F0AS, eller vil du spørge andre brugere om produktet?

Side 1/4
E 1
C
N
H
E
F
D
A
B
J
L
I
M
K
G
Note: the face of the shelf must
sit 1 3/ "4 (44.45 mm) back from
the face of the cabinet.
cabinet face
shelf face O
24" Flush Mount DeFlector Vent: sKMD24F0As
INSTALLATION INSTRUCTIONS
1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.
CL
Top view
A
Anti-Tip block
Mounting cleat
BC
Drawer face Cabinet
face
Note: the mounting surface of the finished cleat must sit 1
1/ " (26.97 mm)16 back
from the face of the cabinet [pushing the face of the drawer out 1/ " (6.35 mm)4].
Figure 1
Figure 2A
Important notes to the Installer
 • Read all of the Installation Manual that is included with
the Microwave Drawer before installing in the ush mount
conguration.
 • Observe all governing codes, ordinances, and safety
instructions.
 •Be sure to leave these instructions with the consumer.
Parts includes:
Qty. Part number
1
PREF-B019MRP0
Flush Mount
Deector Vent
2LX-CZB055MRE0
Mounting screws
T I N S EB 5 41M R R 2
A. 6" (152.40 mm)
B. Suggested electrical outlet location
C. Anti-Tip block
D. 5" (127 mm)
E. 3-1/2" (88.90 mm)
F. 4" (101.60 mm)
G. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
H. 14-13/16" (376.24 mm) to bottom of
Anti-Tip block
I. 1-1/16" (26.97 mm)
J. 23-1/2" (596.90 mm) minimum depth
K. 22-1/8" (561.97 mm)
L. 1-3/4" (44.45 mm)
M. 16-7/8" (428.62 mm) opening
N. Floor must support 100 lb (45.4 kg)
O. 1-3/4" (44.45 mm)
A. 22" (558.8 mm) mounting cleat opening width
B. 1/4" (6.35 mm)
C. 1-1/16" (26.97 mm)
E 2
Shelf detail showing the deflector vent installed.
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
1/ " (1.57 mm) bit before mounting.16
C
Front view
No oven
B
A
Suggested electrical
outlet location Anti-Tip block
3/ "4 (19.05 mm)
shelf
Side view
1 3/ " (44.45 mm)4
front face of shelf
Front face of cabinet
16 7/ "8
(428.62 mm)
flush opening
height
Move oven location
downward for extended
countertops for better
viewing angle. Anti-Tip
block
3. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
4. Carefully guide the drawer into the prepared opening. Avoid
contact with the sides of the cutout opening and also pinching
the cord between the oven and the wall.
5. Slide the drawer all the way back until the mounting anges
touch the cleats mounted in the cabinet opening.
6. Open the drawer. Using the 4 holes on the drawer as a template,
pre drill the cabinet using a 1/16” (1.57 mm) bit. See Figure 4.
Figure 3A
Figure 4
Figure 3B
2. Install deector as shown in Figure 3A.
7. Secure the drawer with the 4 screws supplied.
Mounting
flange
Figure 2B
Figure 2C
A. 22-1/8" (561.97 mm) mounting cleat opening width
B. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
ush opening width
C. 3/4" (19.05 mm) shelf


Produkt Specifikationer

Mærke: Sharp
Kategori: Mikrobølgeovn
Model: SKMD30F0AS

Har du brug for hjælp?

Hvis du har brug for hjælp til Sharp SKMD30F0AS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrobølgeovn Sharp Manualer

Sharp

Sharp SMC2265KS Manual

24 December 2024
Sharp

Sharp SMC2266KS Manual

26 August 2024
Sharp

Sharp R-2V18 Manual

28 Maj 2024
Sharp

Sharp R-890SLM Manual

18 Maj 2024
Sharp

Sharp R-2V11H Manual

13 Maj 2024
Sharp

Sharp R-8480 Manual

11 Maj 2024
Sharp

Sharp R21HT Manual

28 April 2024
Sharp

Sharp R-2V15B Manual

27 April 2024
Sharp

Sharp R-1405T Manual

22 April 2024

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer