Shimano BR-MT520 Manual

Shimano Ikke kategoriseret BR-MT520

Læs gratis den danske manual til Shimano BR-MT520 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Shimano BR-MT520, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Hydraulic Disc Brake

(for E-MTB)

IMPORTANT NOTICE

•Contact the place of purchase or a distributor for information on

installation, adjustment, and replacement of the products which are not

found in the user's manual. A dealer's manual for professional and

experienced bicycle mechanics is available on our website (https://si.

shimano.com).

For safety, be sure to read this “user's manual”

thoroughly before use, follow it for correct use, and

store it so that it can be referenced at any time.

The following instructions must be observed at all times in order to

prevent personal injury and physical damage to equipment and

surroundings. The instructions are classified according to the degree of

danger or damage which may occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result

in death or serious injury.

WARNING Failure to follow the instructions could

result in death or serious injury.

CAUTION

Failure to follow the instructions could

cause personal injury or physical damage

to equipment and surroundings.

Important safety information

WARNING

•Because each bicycle may handle slightly differently depending on the

model, be sure to learn the proper braking technique (including brake

lever pressure and bicycle control characteristics) and operation of your

bicycle. Improper use of your bicycle's brake system may result in a loss

of control or a fall, which could lead to severe injury.

•Do not disassemble or modify the product. This may cause the product

to not operate correctly, and you may suddenly fall and be seriously

injured.

•Riders must become accustomed to the higher performance of this

brake before riding the bicycle.

–The brake system is designed for bicycles for E-MTB, and its braking

force is much higher than for other brakes. If you ride the bicycle

without becoming sufficiently familiar with the braking

characteristics, braking may cause you to fall off the bicycle,

potentially causing serious injury or a fatal accident. Furthermore, the

settings of the brakes make them unsuitable for riding on city streets.

Sudden brake operations may cause the bicycle to fall forward, which

can result in serious injury or even death.

–The 203 mm and 180 mm disc brake rotors provide a higher braking

force than the 160 mm disc brake rotors. If you ride the bicycle

without becoming sufficiently familiar with the braking

characteristics, braking may cause you to fall off the bicycle,

potentially causing serious injury or a fatal accident.

•Please use extra caution to keep your fingers away

from the rotating disc brake rotor. The disc brake

rotor is sharp enough to inflict severe injury to your

fingers if caught within the openings of moving

rotor.

•Do not touch the calipers or disc brake rotor while riding or

immediately after dismounting from the bicycle. The calipers and disc

brake rotor will become hot when the brakes are operated, so you may

get burned if you touch them.

•Be careful not to allow any oil or grease to get onto the disc brake rotor

and brake pads. Riding the bicycle with oil or grease on the disc brake

rotor and brake pads may prevent the brakes from operating and result

in serious injury due to a fall or collision.

•Check the thickness of the brake pads and do not use them if they have

a thickness of 0.5 mm or less. Doing so may prevent the brakes from

operating and result in serious injury.

2 m m 0 . 5 m m

•Do not use the disc brake rotor if it is cracked or deformed. The disc

brake rotor may break, and result in serious injury due to a fall. Replace

the disc brake rotor with a new one.

•Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also do

not use it if the aluminum surface becomes visible. The disc brake rotor

may break, and result in serious injury due to a fall. Replace the disc

brake rotor with a new one.

•Do not continuously apply the brakes. Doing so may cause a sudden

increase in the brake lever stroke, preventing the brakes from operating

and resulting in serious injury.

•Do not use the brakes with fluid leaking. Doing so may prevent the

brakes from operating and result in serious injury.

•Do not apply the front brake too strongly. If you do so, the front wheel

may lock and the bicycle may fall forward, and serious injury may result.

•Because the required braking distance will be longer during wet

weather, reduce your speed and apply the brakes early and gently. You

may fall or collide and be seriously injured.

•A wet road surface may cause tires to lose traction; therefore, to avoid

this, reduce your speed and apply the brakes early and gently. If the

tires lose traction, you may fall and be seriously injured.

CAUTION

Cautions on SHIMANO genuine mineral oil

•Use appropriate eye protection when handling, and avoid contact with

eyes. In the event of eye contact, flush with fresh water and seek

medical assistance immediately. Contact with eyes may result in

irritation.

•Use gloves when handling. In the event of skin contact, wash well with

soap and water. Contact with skin may cause a rash and discomfort.

•Cover nose and mouth with a respirator type mask and use in a well

ventilated area. Inhalation of mineral oil mist or vapors may cause

nausea.

•If mineral oil mist or vapor is inhaled, go to an area with fresh air. Cover

up with a blanket. Stay warm and stable and seek professional medical

advice immediately.

Bed-in period

•Disc brakes have a bed-in period, and the braking force will gradually

increase as the bed-in period progresses. Accidents or falls may occur

due to losing control of the bicycle, possibly resulting in serious injury.

(The same thing will happen when the brake pads or disc brake rotor

are replaced.)

Notice

•To prevent noise and ensure the best performance, perform the bed-in

procedure after replacing the brake pads or disc brake rotor.

•When the bicycle wheel has been removed, it is recommended that pad

spacers are installed. Do not depress the brake lever while the wheel is

removed. If the brake lever is depressed without the pad spacers

installed, the pistons will protrude further than normal. If that happens,

consult a place of purchase.

•Use soapy water and a dry cloth when cleaning and carrying out

maintenance of the brake system. Do not use commercially available

brake cleaners or silencing agents. Such substances can cause damage

to parts such as seals.

•This product is not warranted against damage resulting from improper

use, such as jumping while riding or if the bicycle falls over, except if

such malfunctions are caused by manufacturing methods.

•Products are not guaranteed against natural wear and deterioration

from normal use and aging.

•For maximum performance we highly recommend SHIMANO lubricants

and maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are

found, consult your place of purchase or a distributor.

•Are there any signs of brake oil leakage?

•Do the front and rear brakes work correctly?

•Do the pads have a thickness of 0.5 mm or more?

•Is the disc brake rotor cracked or deformed?

•Are there any abnormal noises?

Names of parts

Brake lever

Caliper

Brake pad

Disc brake rotor

How to operate

This product has a reach adjustment function.

If the brake levers seem too far away and are difficult to reach, contact

the place of purchase or a distributor.

UM-1XM0A-001 User's Manual

How to perform bed-in

To optimize the performance of the brake pads and disc brake rotor,

perform the bed-in procedure as explained in the steps below:

1. Ride your bicycle in a flat and safe area without obstacles and

accelerate to a moderate speed.

2. Operate the brake lever until you slow down to walking speed.

Do this only with one brake lever at a time. Be careful when performing

this procedure. Always operate your brake lever with moderation,

especially when you bed in the front brake.

3. Repeat steps 1 and 2 for at least 20 times for both the front and rear

brakes.

While repeating the process, the brake force will increase.

Please note: specifications are subject to change for improvement without notice. (English)

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	BR-MT520

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano BR-MT520 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Schneider LUCD1XES Manual

4 Juli 2025

Ikea BLÄDDRARE 304.743.99 Manual

4 Juli 2025

NUX Komp Core Deluxe MKII Manual

4 Juli 2025

Ikea GRÖNAMARANT 204.604.25 Manual

4 Juli 2025

Rowenta Focus DW5121 Manual

4 Juli 2025

Racktime Baskit Breeze 2.0 Manual

4 Juli 2025

Schneider KSB32CP15D Manual

4 Juli 2025

Wiesenfield WIE-IN-100 Manual

4 Juli 2025

Ergotec PM-705N Manual

4 Juli 2025

Sol Expert 19590 Manual

4 Juli 2025