Shimano BR-R9110-F Manual

Shimano Ikke kategoriseret BR-R9110-F

Læs gratis den danske manual til Shimano BR-R9110-F (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Shimano BR-R9110-F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Caliper Brakes

IMPORTANT NOTICE

•Contact the place of purchase or a distributor for information on installation,

adjustment, and replacement of the products which are not found in the user's

manual. A dealer's manual for professional and experienced bicycle mechanics is

available on our website (https://si.shimano.com).

For safety, be sure to read this “user's manual” thoroughly

before use, follow it for correct use, and store it so that it

can be referenced at any time.

The following instructions must be observed at all times in order to prevent

personal injury and physical damage to equipment and surroundings. The

instructions are classified according to the degree of danger or damage which may

occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result in

death or serious injury.

WARNING Failure to follow the instructions could result in

death or serious injury.

CAUTION

Failure to follow the instructions could cause

personal injury or physical damage to equipment

and surroundings.

Important safety information

WARNING

•Because each bicycle may handle slightly differently depending on the model, be

sure to learn the proper braking technique (including brake lever pressure and

bicycle control characteristics) and operation of your bicycle. Improper use of your

bicycle's brake system may result in a loss of control or a fall, which could lead to

severe injury.

•Do not disassemble or modify the product. This may cause the product to not

operate correctly, and you may suddenly fall and be seriously injured.

•Do not apply the front brake too strongly. If you do so, the front wheel may lock

and the bicycle may fall forward, and serious injury may result.

•Because the required braking distance will be longer during wet weather, reduce

your speed and apply the brakes early and gently. You may fall or collide and be

seriously injured.

•A wet road surface may cause tires to lose traction; therefore, to avoid this,

reduce your speed and apply the brakes early and gently. If the tires lose traction,

you may fall and be seriously injured.

•Do not allow any oil or grease to get onto the brake shoes. Riding the bicycle

with oil or grease on the brake shoes may prevent the brakes from operating and

result in serious injury due to a fall or collision.

•Do not use the brake cable if it has any rust, fraying, or cracks. Otherwise, the

brakes may not work correctly.

Notice

•When combined with a ceramic rim, SHIMANO road brake shoes wear down more

quickly.

•If the brake shoes have worn down until the grooves are no longer visible, consult

your place of purchase or a distributor.

•Different brake shoes have their own characteristics. Ask the place of purchase or

a distributor for details when purchasing the brake shoes.

•Products are not guaranteed against natural wear and deterioration from normal

use and aging.

•For maximum performance we highly recommend SHIMANO lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found,

consult your place of purchase or a distributor.

•Do the front and rear brakes work correctly?

•Does the brake cable have any rust, fraying, or cracks?

•Have the brake shoes worn down to the grooves?

•Are there signs of cracks or peeling on the levers?

•Are there any abnormal noises?

Names of parts

Grooves of brake

shoe

Brake cable

Brake shoe

Rim surface

Caliper brake

How to operate

When removing the wheel, set the quick release lever of the brake caliper to the

“Open” position.

When installing the wheel, set the quick release lever to the “Open” position. After

installation, make sure to set it to the “Close” position and ensure that the brakes

are working correctly before riding the bicycle.

* The open/close positions for the quick release lever vary by model.

Quick release lever

Open

Close Close

For models with a CLOSE position mark on the quick release lever and brake caliper

side, align the marks. At this time, check for a click.

CLOSE position

mark

UM-8GY0A-005 User's Manual

Please note: specifications are subject to change for improvement without notice. (English)

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	BR-R9110-F

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano BR-R9110-F stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SP-CAG-435320 Manual

1 December 2025

Vevor LX-PMMA-36*48 Manual

1 December 2025

Vevor TC2135 Manual

1 December 2025

Vevor PFFSTGSH08 Manual

1 December 2025

Microchip M1A3P600L Manual

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025