Shimano DH-2N35-NT Manual

Shimano Ikke kategoriseret DH-2N35-NT

Læs gratis den danske manual til Shimano DH-2N35-NT (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Shimano DH-2N35-NT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Hub Dynamo

User's manuals in other languages are available at :

https://si.shimano.com

IMPORTANT NOTICE

•Contact the place of purchase or a distributor for information on

installation, adjustment, and replacement of the products which are

not found in the user's manual. A dealer's manual for professional

and experienced bicycle mechanics is available on our website (https://

si.shimano.com).

For safety, be sure to read this “user's manual”

thoroughly before use, follow it for correct use,

and store it so that it can be referenced at any time.

The following instructions must be observed at all times in order to

prevent personal injury and physical damage to equipment and

surroundings. The instructions are classified according to the degree of

danger or damage which may occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result

in death or serious injury.

WARNING Failure to follow the instructions could

result in death or serious injury.

CAUTION

Failure to follow the instructions could

cause personal injury or physical damage

to equipment and surroundings.

Important safety information

WARNING

•Do not disassemble or modify the product. This may cause the product

to not operate correctly, and you may suddenly fall and be seriously

injured.

•Check that the wheels are fastened securely before riding the

bicycle. The wheel may fall off, etc. and lead to serious injury

due to a fall.

•Observe the total weight of the bicycle (bicycle + rider + luggage)

indicated on the hub body. If the total weight of the bicycle is

indicated on the hub body, the power modulator that controls an

excessive braking effect is built in. If the total weight of the bicycle is

heavier than the recommended range, braking may be insufficient; if

lighter, braking will be too effective and the wheel may be locked,

which may cause you to fall off the bicycle. Make sure you fully

understand the performance of the power modulator before use. The

power modulator is not an anti-locking device of the wheel.

•Ensure that head and tail lights can turn on before riding the bicycle.

CAUTION

•When riding or rotating the wheels, never touch the connection

terminals of the hub dynamo. Failure to do so may cause an electric

shock.

Notice

•Be sure to install the hub dynamo to the front fork so that the side

with the connection terminal is on the right when facing toward the

front of the bicycle. If it is installed on the left side, rotation problems

may occur while riding.

•Check that the hub dynamo connection terminal is securely connected

before using the hub dynamo.

•Make sure to also refer to the brake user's manual.

•Products are not guaranteed against natural wear and deterioration

from normal use and aging.

•For maximum performance we highly recommend SHIMANO

lubricants and maintenance products.

* The 1.5 W hub dynamo is for LED use only.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are

found, consult your place of purchase or a distributor.

•Are the wheels secure?

•Does the light turn on?

•Is abnormal noise emitted from inside the hub?

Names of parts

Connector

cover

Remove

Connect

Connection

terminal

Cord

Front fork

Hub body

UM-2XY0C-000-00 User's Manual

Please note: specifications are subject to change for improvement without notice. (English)

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	DH-2N35-NT

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano DH-2N35-NT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SP-CAG-435320 Manual

1 December 2025

Vevor LX-PMMA-36*48 Manual

1 December 2025

Vevor TC2135 Manual

1 December 2025

Vevor PFFSTGSH08 Manual

1 December 2025

Microchip M1A3P600L Manual

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025