Shimano FH-T4000 Manual

Shimano Ikke kategoriseret FH-T4000

Læs gratis den danske manual til Shimano FH-T4000 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Shimano FH-T4000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

Please note: speciﬁ cations are subject to change for improvement without notice. (English)

UM-3E00A-003-00 User's manual

Rear Freehub

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

•Contact the place of purchase or a bicycle dealer for information on

installation and adjustment of the products which are not found in the

user's manual. A dealer's manual for professional and experienced bicycle

mechanics is available on our website (http://si.shimano.com).

•Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly

before use, and follow them for correct use.

Important Safety Information

Guidelines that require replacement, contact the place of purchase or a

bicycle dealer.

WARNING

•Check that the wheels are fastened securely before riding the bicycle. If

the wheels are loose in any way, they may come off the bicycle and

serious injury may result.

•After reading the user's manual carefully, keep it in a safe place for later

reference.

CAUTION

•Never fasten a wheel to a frame by

rotating the quick release lever as shown

in the diagram on the right.

Simply rotating the lever in a circular

motion will not fasten the wheel to the

frame.

Detachment of the wheel as a result of

improper hub installation can result in

serious bodily injury.

Note

•Do not apply any lubricant to the inside of the hub, otherwise the grease

will come out.

•If the quick release lever can be easily pushed to the CLOSE position, this

means the clamping strength is insufﬁ cient. Return the quick release lever

to the position perpendicular to the bicycle frame and again turn the

adjusting nut clockwise to increase the clamping strength. Push the quick

release lever back to the CLOSE position.

Adjusting nut

•If the clamping strength is adjusted too strong and the quick release lever

cannot be pushed to the CLOSE position, turn the adjusting nut in a

counter-clockwise direction to reduce the clamping strength. When doing

this, do not fully release the adjuster nut. Turn it 1/8 of a revolution, and

then try to push the lever to CLOSE, to set the maximum clamping

strength with which you can push the quick release lever to the

CLOSE position.

Turn 1/8 revolution

at a time

•Products are not guaranteed against natural wear and deterioration from

normal use and aging.

•For maximum performance we highly recommend Shimano lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are

found with the following items, contact the place of purchase or a bicycle

dealer.

•Are the wheels ﬁ xed?

•Do the wheels rotate smoothly?

•Are there any abnormal noises?

Names of parts

Quick release lever

Rear freehub

What is a Quick Release?

It is a mechanism that uses a single quick release lever operation on the hub

to enable the wheel to be easily installed and removed.

Quick Release function

When the quick release lever is brought to the closed position, the lever nut

moves inward. The force of this clamps the wheel to the frame and holds the

wheel securely in place.

CLOSE position

Open position

Adjusting nut

Lever nut

Quick release lever

The clamping strength is adjusted by turning the adjusting nut. When the

nut is turned in a clockwise direction, the clamping strength increases, and

when the nut is turned in a counter-clockwise direction, the clamping

strength decreases.

Adjusting nut

Weaker

Stronger

Suitable dimensions of the rear end

Be sure to use only rear end widths with suitable dimensions.

Can not use fork thicknesses less than 5 mm.

(Dura-Ace, 600 Ultegra: not less than 6 mm.)

Operation

How to fasten this quick release hub

1. Move the quick release lever to the OPEN position and set the wheel so it

ﬁ rmly touches the interior of the rear end (See sketch below).

OPEN position

OK No Good

2. Open and close the quick release lever with your right hand while

gradually tightening the adjusting nut with your left hand in the clockwise

direction. Continue tightening the nut until you feel resistance with your

hand at the point when the lever is parallel to the hub (as indicated by the

dotted position in the diagram on the right).

Adjusting nut

Quick release lever

3. Grip the rear end with your ﬁ ngers and use the palm of your hand to close

the quick release lever with as much strength as possible. When closed, the

quick release lever must be in the "CLOSE" position shown below in the

diagram on the right. The side of the lever with the inscription "CLOSE"

must be facing away from the bicycle, and the lever should be parallel to

the rear end as shown below in the diagram on the left.

Tightening torque:

5 -7.5 N·m {43 -65 in. lbs.}

Rear end

Quick

release

lever

CLOSE position

Positioning of the quick release lever

For safety, the quick release lever should be along the bicycle frame when in

the CLOSE position.

Removing the wheel

Move the quick release lever from the CLOSE position to the OPEN position.

And then remove the wheel.

OPEN position

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	FH-T4000

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano FH-T4000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SP-CAG-435320 Manual

1 December 2025

Vevor LX-PMMA-36*48 Manual

1 December 2025

Vevor TC2135 Manual

1 December 2025

Vevor PFFSTGSH08 Manual

1 December 2025

Microchip M1A3P600L Manual

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025