Shimano PD-MT50 Manual

Shimano Ikke kategoriseret PD-MT50

Læs gratis den danske manual til Shimano PD-MT50 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Shimano PD-MT50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

SHIMANO CLICK'R Pedals

IMPORTANT NOTICE

•Contact the place of purchase or a distributor for information on installation,

adjustment, and replacement of the products which are not found in the user's

manual. A dealer's manual for professional and experienced bicycle mechanics is

available on our website (https://si.shimano.com).

For safety, be sure to read this “user's manual” thoroughly

before use, follow it for correct use, and store it so that it

can be referenced at any time.

The following instructions must be observed at all times in order to prevent

personal injury and physical damage to equipment and surroundings. The

instructions are classified according to the degree of danger or damage which may

occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result in

death or serious injury.

WARNING Failure to follow the instructions could result in

death or serious injury.

CAUTION

Failure to follow the instructions could cause

personal injury or physical damage to equipment

and surroundings.

Important safety information

WARNING

•In order to ensure child safety for children using this product, children should be

given instruction on the correct use after both guardians and children have fully

understood the following information. Failure to follow the provided instructions

may lead to serious injury.

•Do not disassemble or modify the product. This may cause the product to not

operate correctly, and you may suddenly fall and be seriously injured.

•Be careful when using pedals in competition or aggressively. The cleats may

become accidentally released from the pedals and you may fall off the bicycle.

These pedals are for recreation and so are designed to be engaged with and

released from the cleats more easily than SPD pedals.

•Before attempting to ride with these pedals and cleats (shoes), make sure you

understand the operation of the engagement/release mechanism for the pedals

and cleats (shoes). SPD pedals are designed to be released only when intended.

They are not designed to be released automatically when you have fallen off the

bicycle.

•Use only SPD shoes with this product. Other types of shoes may not release from

the pedals, or may release unexpectedly.

•Use only SHIMANO cleats (SM-SH51/SM-SH56) and make sure that the mounting

screws are tightened securely to the shoes. Failure to securely tighten the screws

may result in a fall in which the cleats do not release.

•Before attempting to ride with these pedals and cleats, apply the brakes, then

place one foot on the ground and practice engaging and releasing each cleat

from its pedal until you can do so naturally and with minimal effort.

•Ride on level ground first until you become accustomed to engaging and

releasing your cleats from the pedals.

•Before riding, adjust the cleat holding force of the pedals to your liking. If the

cleat holding force of the pedals is low, the cleats may become accidentally

released and you may lose balance and fall off the bicycle. If the cleat holding

force of the pedals is high, the cleats cannot be easily released.

•When riding at low speed or when there is a possibility that you might need to

stop riding, (for example, when doing a U-turn, nearing an intersection, riding

uphill or turning a blind curve), release your cleats from the pedals beforehand so

that you can quickly put your feet onto the ground at any time.

•Use a lighter cleat holding force for attaching the pedal cleats when riding in

adverse conditions.

•Keep cleats and bindings out of dirt and debris to ensure proper engagement and

release.

•Remember to check the cleats periodically for wear. When the cleats are worn,

replace them, and adjust the cleat holding force before riding and after replacing

the pedal cleats.

If the warnings above are not followed, your shoes may not come out of

the pedals when you intend or they may come out unexpectedly or

accidentally, and severe injury may result.

•Reflectors have to be mounted to the bike at any time as soon as traveling on

public roads. Reflectors are sold separately for models that do not come with

reflectors equipped as standard. For information on compatible reflectors, contact

the place of purchase or a distributor.

•Do not continue riding the bicycle if the reflectors are dirty or damaged.

Otherwise, it becomes more difficult for oncoming vehicles to see you.

•Do not use the pedals or cleats in any way not described in the user's manual.

When the cleat and pedal are facing forwards, the cleat can be released and

engaged with the pedal.

Read the user's manual carefully for instructions on using the cleats. Failure to

follow the instructions may lead to serious injury.

Front

•Read the manual and choose the correct product for your needs, based on a

consideration of bicycle type, riding terrain, and conditions. Single release mode

cleats (SM-SH51) and multiple release mode cleats (SM-SH56) are available for use

with these pedals.

Cleats such as the single release mode cleats (SM-SH52) and multiple release mode

cleats (SM-SH55) cannot be used as they lack certain features, such as stable

step-out performance and sufficient holding force. If such cleats are used, the

shoes may not come out of the pedals when you intend or they may come out

unexpectedly or accidentally, resulting in the bicycle collapsing and serious injury.

Notice

•If pedaling performance does not feel normal, perform an inspection again.

•If you experience any trouble with the rotating parts of the pedal, the pedal may

require adjustment. Consult your place of purchase or a distributor.

•If the cage becomes damaged, it can be replaced. Consult your place of purchase

or a distributor for replacement.

•Products are not guaranteed against natural wear and deterioration from normal

use and aging.

•For maximum performance we highly recommend SHIMANO lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found,

consult your place of purchase or a distributor.

•Are the fastening sections fixed securely?

•Has excess play increased between the cleat and pedal due to wear?

•Are there any abnormalities when the cleat engages or releases?

•Are there any abnormal noises?

Names of parts

Fastening section

Cage

Reﬂector

Binding

Cleat types, and using the cleats

How to engage

Press the cleats into the pedal binding with an angled downward motion.

How to release

The release mode can be selected depending on the type of cleat being used.

(Check the cleat model number and color for the appropriate release method.)

UM-41V0A-006 User's Manual

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	PD-MT50

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano PD-MT50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SP-CAG-435320 Manual

1 December 2025

Vevor LX-PMMA-36*48 Manual

1 December 2025

Vevor TC2135 Manual

1 December 2025

Vevor PFFSTGSH08 Manual

1 December 2025

Microchip M1A3P600L Manual

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025