Shimano SL-2400-R Manual

Shimano Ikke kategoriseret SL-2400-R

Læs gratis den danske manual til Shimano SL-2400-R (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Shimano SL-2400-R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Shift Lever

(2-WAY RELEASE)

IMPORTANT NOTICE

•Contact the place of purchase or a distributor for information on installation,

adjustment, and replacement of the products which are not found in the user's

manual. A dealer's manual for professional and experienced bicycle mechanics is

available on our website (https://si.shimano.com).

For safety, be sure to read this “user's manual” thoroughly

before use, follow it for correct use, and store it so that it

can be referenced at any time.

The following instructions must be observed at all times in order to prevent

personal injury and physical damage to equipment and surroundings. The

instructions are classified according to the degree of danger or damage which may

occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result in

death or serious injury.

WARNING Failure to follow the instructions could result in

death or serious injury.

CAUTION

Failure to follow the instructions could cause

personal injury or physical damage to equipment

and surroundings.

Important safety information

WARNING

•Do not disassemble or modify the product. This may cause the product to not

operate correctly, and you may suddenly fall and be seriously injured.

Notice

•Be sure to keep turning the crank during the lever operation.

•Products are not guaranteed against natural wear and deterioration from normal

use and aging.

•In the case of carbon levers, wash them with a soft cloth using a neutral

detergent. Otherwise, the material may be damaged and lose strength.

•Avoid leaving the carbon levers in places where high temperatures are present.

Also keep them well away from fire.

•For maximum performance we highly recommend SHIMANO lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found,

consult your place of purchase or a distributor.

•Is gear shifting carried out smoothly?

•Are the levers securely installed to the handlebar?

•Do any abnormal noises occur during operation?

Names of parts

Lever B Lever B

Lever A

Crank

Front Rear

How to operate

Gear shifting operations

Be sure to keep turning the crank during the lever operation.

Caution on operation

After gear shifting is completed, both levers A and B return to their initial position.

Right-hand lever operation

The number of sprocket shifts depends on the lever stroke. To shift one sprocket,

move the lever to position (1). To shift two sprockets, move the lever to position (2).

•Lever A: Shifts to a larger sprocket

(2)

(1)

Lever A initial position

(1) Shifts one sprocket

Example: From the 3rd to 4th sprocket

4 3

(2) Quick-shifts two sprockets

Example: From the 3rd to 5th sprocket

•Lever B: Shifts to a smaller sprocket

(2)

(1)

Lever B initial position

(1)

(2)

Example: From the 4th to 3rd sprocket

Gears can be shifted by pushing or pulling the lever. Some models have two-step

gear shifting.

Left-hand lever operation

* The illustration is of the triple model, but the method is the same for the

double model.

•Lever A: Shifts to a larger chainring

Lever A initial position

•Lever B: Shifts to a smaller chainring

Lever B initial position

Gears can be shifted by pushing or pulling the lever.

UM-0148A-002 User's Manual

Trimming operation (noise prevention mechanism)

* Some product models support trimming operations. Contact your place of

purchase for the supported models.

When noise occurs due to the front derailleur contacting the chain, perform the

following operation.

The lever to operate differs according to the chain position.

* The illustration is of the triple model, but the method is the same for the

double model.

Largest chainring

High limit sprocket High limit sprocket

Middle chainring Smallest chainring

High limit sprocket

Chain

position

Lever

operation

Click (make contact) Lever A

Largest chainring

Low limit sprocket Low limit sprocket

Middle chainring Smallest chainring

Low limit sprocket

Chain

position

Lever

operation

Click (make contact)

Lever B

Please note: specifications are subject to change for improvement without notice. (English)

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	SL-2400-R

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano SL-2400-R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025