Shimano WH-M8100-TL-R12-B-29 Manual

Shimano Ikke kategoriseret WH-M8100-TL-R12-B-29

Læs gratis den danske manual til Shimano WH-M8100-TL-R12-B-29 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Shimano WH-M8100-TL-R12-B-29, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Please note: specifications are subject to change for improvement without notice. (English)

UM-48A0A-003-00 User's manual

WH-M9000-TL / WH-M9020-TL /

WH-M8000-TL / WH-M8020-TL /

WH-M8100-TL / WH-M8120-TL

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

•Contact the place of purchase or a bicycle dealer for information on installation

and adjustment of the products which are not found in the user's manual. A

dealer's manual for professional and experienced bicycle mechanics is available on

our website (http://si.shimano.com).

•Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly

before use, and follow it for correct use.

Important Safety Information

For replacement information, contact the place of purchase or a bicycle dealer.

WARNING

•Check that the wheels are fastened securely before riding the bicycle. If the

wheels are loose in any way, they may come off the bicycle and cause serious

injury.

•The tires should be inﬂated to the pressure indicated on the tires or rims before

use. If the maximum pressure is prescribed on the tires and rims, be sure not to

exceed the lower value shown.

•WH-M9000-TL: Maximum pressure = 2.8 bar / 41 psi / 280 kPa

WH-M9020-TL: Maximum pressure = 2.6 bar / 38 psi / 260 kPa

WH-M8000-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa

WH-M8020-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa

WH-M8100-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa

WH-M8120-TL: Maximum pressure = 2.5 bar / 36 psi / 250 kPa

A higher pressure than indicated can cause a sudden puncture and / or sudden release of

the tire, which can result in serious injury.

•Before riding the bicycle, carefully check the wheels to make sure that there are no

cracks in the axles; if there is any sign of a crack or any other unusual condition, DO

NOT use the bicycle. This wheel is not designed for downhill bicycle riding or

freeriding. Depending on the riding conditions, the wheel axle could develop cracks.

This could result in the failure of the wheel axle, which can lead to an accident

resulting in serious injury or even death.

•Before riding the bicycle, check the wheels to make sure that there are no bent or

loose spokes, dents, scratches or cracks on the rim surface. Do not use the wheel if

any of these problems are found. The wheel may break, and you may fall. Check

also that there is no carbon separation or cracking.

•Do not use with rim brakes. These wheels are designed exclusively for use with

disc brakes. They are not compatible with rim brakes.

•After reading the user's manual carefully, keep it in a safe place for later

reference.

<E-THRU Axle Type Wheel>

•Make sure that, even if the axle release lever is securely

tightened, the axle release lever does not interfere with

the disc brake rotor. If the axle release lever is on the same

side as the disc brake rotor, there is a possibility they may

interfere. If it interferes with the disc brake rotor, stop

using it and consult a place of purchase or a distributor.

Axle

elease

ever

isc brake

otor

•Check how to use the axle release lever. If the axle release lever is not used

correctly, the wheel may come off the bicycle and serious injury could result.

•This wheel can be used in combination with the special front fork and the E-THRU.

If used in combination with any other front fork or through axle, it may cause the

wheel to become detached from the bicycle while riding and result in serious

bodily injury.

•When installing the front wheel to the front suspension fork, always be sure to

follow the directions given in the owner's manual for the front suspension fork.

The securing method and tightening torque for the front wheel both vary

depending on the type of front suspension fork being used. If the instructions are

not followed, the front wheel may fall out of the front suspension fork and

serious injury may occur.

•Make sure that, even if the quick release lever is tightened

as much as possible by hand, the quick release lever does

not interfere with the disc brake rotor. If the quick release

lever is on the same side as the disc brake rotor, there is

the danger that it may interfere with the disc brake rotor.

If it interferes with the disc brake rotor, stop using it and

consult a place of purchase or a distributor.

Quick

elease

lever

Disc

brake

rotor

CAUTION

•If you will be using a puncture repair agent, consult the place of purchase or a

distributor.

Burn-in period

•Note that disc brakes have a burn-in period. Disc brakes have a burn-in period,

and the braking force will gradually increase as the burn-in period progresses.

Make sure that you are aware of any such increases in braking force when using

the brakes during the burn-in period. The same thing will happen when the brake

pads or disc brake rotor are replaced.

Notice

•For the use of the attached nipple wrench tool, ask the place of purchase or the

distributor.

•Special nipple wrenches are available as optional accessories.

•Do not apply any oil to the inside of the hub. Otherwise the grease will come out.

•We recommend that you ask bicycle dealers to adjust the spoke tensions if there is

any deviation in the spokes and after the ﬁrst 1,000 km of riding.

•Do not use detergent or other chemicals when wiping the wheel, otherwise the

sticker on the rim or the paint may come off.

•Products are not guaranteed against natural wear and deterioration from normal

use and aging.

•For maximum performance we highly recommend Shimano lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found with

the following items, contact the place of purchase or a bicycle dealer.

•Are there any cracks in the wheel axle?

•Are there any bent or loose spokes?

•Are there any dents, scratches, or cracks on the rim surface?

•Are the wheels ﬁxed?

•Do the wheels rotate smoothly?

•Is there any noise from the wheels?

Names of parts

Front hub

Axle release lever Axle release lever

Rear freehub

F15 R12

Quick release lever

Hub

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	WH-M8100-TL-R12-B-29

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano WH-M8100-TL-R12-B-29 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Schneider LUCD1XES Manual

4 Juli 2025

Ikea BLÄDDRARE 304.743.99 Manual

4 Juli 2025

NUX Komp Core Deluxe MKII Manual

4 Juli 2025

Ikea GRÖNAMARANT 204.604.25 Manual

4 Juli 2025

Rowenta Focus DW5121 Manual

4 Juli 2025

Racktime Baskit Breeze 2.0 Manual

4 Juli 2025

Schneider KSB32CP15D Manual

4 Juli 2025

Wiesenfield WIE-IN-100 Manual

4 Juli 2025

Ergotec PM-705N Manual

4 Juli 2025

Sol Expert 19590 Manual

4 Juli 2025