Shimano WH-MT66-F-29 Manual

Shimano Ikke kategoriseret WH-MT66-F-29

Læs gratis den danske manual til Shimano WH-MT66-F-29 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Shimano WH-MT66-F-29, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

UM-4RJ0A-004-00 User's manual

MTB Wheel Set

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

•Contact the place of purchase or a bicycle dealer for information on installation

and adjustment of the products which are not found in the user's manual. A

dealer's manual for professional and experienced bicycle mechanics is available on

our website (http://si.shimano.com).

•Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly

before use, and follow them for correct use.

Important Safety Information

Guidelines that require replacement, contact the place of purchase or a bicycle

dealer.

WARNING

•Check that the wheels are fastened securely before riding the bicycle. If the

wheels are loose in any way, they may come off the bicycle and serious injury

may result.

•Do not use it for downhill riding, otherwise the wheel may become bent or

otherwise damaged, and accidents may occur as a result.

•Before use, check the wheels to make sure that there are no bent or loose spokes,

dents, scratches or cracks on the rim surface. Do not use the wheel if any of these

problems are found. The wheel may break, and you may fall. In the case of carbon

wheels, check also that there is no carbon separation or cracking.

•These wheels are designed exclusively for use with disc brakes. Do not use these

wheels with rim brakes.

•After reading the user's manual carefully, keep it in a safe place for later

reference.

•This wheel is not designed for downhill bicycle riding and freeriding. Hence,

depending on the riding conditions, the hub axle could develop cracks which may

result in failure of the hub axle. This can lead to an accident that could result in

serious injury or even death. Before riding, you should carefully check your hubs

to make sure that there are no cracks in the axles, and if you ﬁ nd any sign of a

crack or any other unusual condition, DO NOT use the bicycle.

•If the axle release lever is on the same side as the disc

brake rotor, there is the danger that it may interfere with

the disc brake rotor. Make sure that even if the axle release

lever is tightened with your palm with all your strength,

the axle release lever does not interfere with the disc brake

rotor. If the lever interferes with the disc brake rotor, stop

using the wheel and consult a dealer or an agency.

Axle release

lever

Disc brake

rotor

•If the axle release lever is not used correctly, the wheel may come off the bicycle

and serious injury could result.

•This wheel can be used in combination with a special front fork and the E-Thru. If

it is used in combination with any other front fork or ﬁ xed axle, it may cause the

wheel to become detached from the bicycle while you are riding and result in

serious bodily injury.

•The securing method and tightening torque for the front wheel both vary

depending on the type of front suspension fork being used. When installing the

front wheel to the front suspension fork, always be sure to follow the directions

given in the Service Instructions for the front suspension fork. If the directions are

not followed, the front wheel may fall out of the front suspension fork and

serious injury may result.

•If the quick release lever is on the same side as the disc

brake rotor, there is the danger that it may interfere with

the disc brake rotor. Make sure that even if the quick

release lever is tightened with your palm with all your

strength, the quick release lever does not interfere with

the disc brake rotor. If the lever interferes with the disc

brake rotor, stop using the wheel and consult a dealer or

an agency.

Quick

release

lever

Disc

brake

rotor

•Before riding, check if the tires are glued to the rims securely. If the tires come off

while riding, you may fall and get severely injured.

CAUTION

•The tires should be inﬂ ated to the pressure indicated on the tires before use.

•When you use a puncture repair agent, you should consult a dealer or an agency.

Burn-in period

•Disc brakes have a burn-in period, and the braking force will gradually increase as

the burn-in period progresses. Make sure that you are aware of any such increases

in braking force when using the brakes during the burn-in period. The same thing

will happen when the brake pads or disc brake rotor are replaced.

Note

•For the use of the attached nipple wrench tool, ask the shop where you purchased

it or the distributor.

•Special nipple wrenches are available as optional accessories.

•Do not apply any oil to the inside of the hub, otherwise the grease will come out.

•We recommend that you ask bicycle dealers to adjust the spoke tensions if there is

any initial play in the spokes and after the ﬁ rst 1,000 km of riding.

•Do not use detergent or other chemicals when wiping the wheel, otherwise it may

cause the sticker on the rim to peel off.

•Products are not guaranteed against natural wear and deterioration from normal

use and aging.

•For maximum performance we highly recommend Shimano lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found with

the following items, contact the place of purchase or a bicycle dealer.

•Are the tubular tires glued to the rims securely?

•Are there any bent or loose spokes?

•Are there any dents, scratches, or cracks on the rim surface?

•Are the wheels ﬁ xed?

•Do the wheels rotate smoothly?

•Is there any noise from the wheels?

Names of parts

Front hub

Axle release lever Axle release lever

Rear freehub

F15 R12

Quick release lever

Hub

Please note: specifications are subject to change for improvement without notice. (English)

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	WH-MT66-F-29

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano WH-MT66-F-29 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SP-CAG-435320 Manual

1 December 2025

Vevor LX-PMMA-36*48 Manual

1 December 2025

Vevor TC2135 Manual

1 December 2025

Vevor PFFSTGSH08 Manual

1 December 2025

Microchip M1A3P600L Manual

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025