Shimano WH-R9170-C60-TU-R12 Manual

Shimano Ikke kategoriseret WH-R9170-C60-TU-R12

Læs gratis den danske manual til Shimano WH-R9170-C60-TU-R12 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Shimano WH-R9170-C60-TU-R12, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Wheel Set (for Disc Brake)

IMPORTANT NOTICE

•Contact the place of purchase or a distributor for information on installation,

adjustment, and replacement of the products which are not found in the user's

manual. A dealer's manual for professional and experienced bicycle mechanics is

available on our website (https://si.shimano.com).

For safety, be sure to read this “user's manual” thoroughly

before use, follow it for correct use, and store it so that it

can be referenced at any time.

The following instructions must be observed at all times in order to prevent

personal injury and physical damage to equipment and surroundings. The

instructions are classified according to the degree of danger or damage which may

occur if the product is used incorrectly.

DANGER Failure to follow the instructions will result in

death or serious injury.

WARNING Failure to follow the instructions could result in

death or serious injury.

CAUTION

Failure to follow the instructions could cause

personal injury or physical damage to equipment

and surroundings.

Important safety information

WARNING

•Do not disassemble or modify the product. This may cause the product to not

operate correctly, and you may suddenly fall and be seriously injured.

•Check that the wheels are fastened securely before riding the bicycle.

Using the axle release lever incorrectly may cause the wheel to fall off,

etc. and lead to serious injury due to a fall.

•Use the appropriate air pressure indicated on the tire and rim. If the maximum

pressures indicated on the tires and rims differ, be sure not to exceed the

maximum pressure with the lower value.

•Before riding the bicycle, check the wheels to make sure that there are no bent or

loose spokes, dents, scratches or cracks on the rim surface. Do not use the wheel

if any of these problems are found. The wheel may break, and you may fall.

Check also that there is no carbon separation or cracking.

•Do not use the Road Wheel Set on unpaved surfaces. The Road Wheel Set is

designed for paved surfaces. If the wheels are used on unpaved surfaces, they

may become bent or damaged, and accidents may result.

•Do not use with rim brakes. These wheels are designed exclusively for use with

disc brakes. Using these wheels with rim brakes could damage the rims and result

in an accident that can lead to a serious injury or even death.

•Confirm that the axle release lever does not interfere with the disc brake rotor

even when it is fully engaged. The axle release lever may interfere with the disc

brake rotor if it is on the disc brake rotor side, which is dangerous. If the axle

release lever interferes with the disc brake rotor, immediately stop use and

contact the place of purchase or a distributor.

Axle release

lever

Disc brake rotor

•For details on the E-THRU axle, refer to the E-THRU axle user's manual.

F12 (front 12 mm axle), R12 (rear 12 mm axle) wheel (thru axle)

•This wheel can only be used in combination with the special front fork/frame and

the through axle. If it is used in combination with any other front fork/frame or

through axle, it may cause the wheel to become detached from the bicycle during

riding and result in serious bodily injury.

Tubular wheel

•Before riding the bicycle, check that the tires are securely glued to the rims. If the

tires come off while riding, you may fall and get severely injured.

CAUTION

•Note that a higher rim is more easily affected by the wind and makes riding

unstable.

Burn-in period

•Disc brakes have a burn-in period, and the braking force will gradually increase as

the burn-in period progresses. Make sure that you are aware of any such increases

in braking force when using the brakes during the burn-in period. The same thing

will happen when the brake pads or disc brake rotor are replaced.

Notice

•For the use of the supplied nipple wrench tool, contact your place of purchase or

a distributor for their assistance.

•Special nipple wrenches are available as optional accessories.

•Do not lubricate the internal parts of the hub. Otherwise, grease will flow out.

•It is recommended that you ask a place of purchase to adjust the spoke tensions if

there is any deviation in the spokes and after the first 1,000 km of riding.

•Do not use detergent or other chemicals when wiping the wheel, otherwise, the

sticker on the rim may come off.

•Be sure to also read the manual for the disc brakes.

•Products are not guaranteed against natural wear and deterioration from normal

use and aging.

•For maximum performance we highly recommend SHIMANO lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found,

consult your place of purchase or a distributor.

•Is the tire of the tubular wheel installed correctly?

•Are the spokes broken or loose?

•Is the rim surface dented, damaged, or cracked?

•Are the wheels secure?

•Are there any signs of brake oil leakage?

•Do the pads have a thickness of 0.5 mm or more?

•Is the disc brake rotor cracked or deformed?

•Is it hard to rotate the wheels?

•Is abnormal noise emitted from the wheels?

Names of parts

Brake cable /

brake hose

Brake cable /

brake hose

Disc brake rotor

Caliper Brake pad

Caliper

Disc brake rotor

Valve hole

Spoke

Rim surfaceFreehubFront hub

Axle release lever

E-THRU / through axle

UM-0AS0A-003 User's manual

Please note: specifications are subject to change for improvement without notice. (English)

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Ikke kategoriseret
Model:	WH-R9170-C60-TU-R12

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano WH-R9170-C60-TU-R12 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shimano Manualer

Shimano FC-MT610-B2 Manual

11 Januar 2025

Shimano ST-T4000-R Manual

30 December 2025

Shimano BR-M8120 Manual

7 Oktober 2024

Shimano SL-RV400-6R Manual

7 Oktober 2024

Shimano SL-RV300-6R Manual

6 Oktober 2024

Shimano ST-2400-R Manual

6 Oktober 2024

Shimano CN-HG901-11 Manual

6 Oktober 2024

Shimano DH-T785 Manual

4 Oktober 2024

Shimano CLARIS 2400 ST-R240-R Manual

1 Oktober 2024

Shimano SL-RV300-7R Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor SP-CAG-435320 Manual

1 December 2025

Vevor LX-PMMA-36*48 Manual

1 December 2025

Vevor TC2135 Manual

1 December 2025

Vevor PFFSTGSH08 Manual

1 December 2025

Microchip M1A3P600L Manual

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025