Siemens SN414W01AS Manual

Siemens Opvaskemaskine SN414W01AS

Læs gratis den danske manual til Siemens SN414W01AS (44 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Siemens SN414W01AS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

Operation Guide 3284

E-9

Press 2. to change the selection in the following sequence.C

MinutesHour

Normal Alarm Mode (No digit ﬂ ashes)

Press 3. to increase the selected digits. Holding down changes the number at A A

high speed.

The format (12-hour and 24-hour) of the alarm time matches the format you select x

for normal timekeeping.

When setting the alarm time using the 12-hour format, take care to set the time x

correctly as morning or afternoon ( ).PM

After you set the alarm time, use 4. to return to the Alarm Mode.C

If you do not operate any button for one or two minutes while a selection is ﬂ ashing, x

the ﬂ ashing stops and the watch goes back to the Timekeeping Mode automatically.

E-8

Alarm

When the Daily Alarm is turned on, the alarm sounds for

20 seconds at the preset time each day. When the Hourly

Time Signal is turned on, the watch beeps every hour on

the hour.

All of the operations in this section are performed in the x

Alarm Mode, which you enter by pressing (page E-4).B

To set the alarm time

In the Alarm Mode, press 1. . The hour digits ﬂ ash C

because they are selected.

This operation automatically turns on the alarm. x

Alarm on indicator

Hourly time signal

on indicator

Alarm time

(Hour : Minutes)

Mode indicator

E-7

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with x24H

indicator.

E-6

Timekeeping

Use the Timekeeping Mode to view the current time and

date.

Day of the week is displayed as follows. x

SU : Sunday MO : Monday

TU : Tuesday WE : Wednesday

TH : Thursday FR : Friday

SA : Saturday

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to switch between the A

12-hour and 24-hour formats.

With the 12-hour format, the xPM indicator appears for

times in the range of noon to 11:59 p.m. and no indicator

appears for times in the range of midnight to 11:59 a.m.

PM indicator

Day of week

Day

Hour : Minutes Seconds

E-5

The watch returns to the Timekeeping Mode automatically if you do not perform any x

button operation for one or two minutes in the Alarm Mode and Time Setting Mode.

In any mode, press xC to illuminate the display.

Stopwatch Mode Time Setting Mode

E-4

General Guide

Press xB to change from mode to mode.

After you perform an operation in any mode, pressing xB returns to the Timekeeping

Mode.

Timekeeping Mode Alarm Mode

Press .B

E-3

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To toggle between 12-hour and 24-hour timekeeping ......................................... E-6

To set the alarm time ............................................................................................... E-8

To stop the alarm .................................................................................................. E-10

To switch the Daily Alarm and Hourly Time Signal on and off ......................... E-10

To test the alarm .................................................................................................... E-10

To measure times with the stopwatch ................................................................. E-12

To set the time and date .......................................................................................E-13

E-2

Contents

General Guide ..........................................................................................................E-4

Timekeeping .............................................................................................................E-6

Alarm ........................................................................................................................E-8

Stopwatch ..............................................................................................................E-11

Time Setting ...........................................................................................................E-13

Speciﬁ cations ........................................................................................................E-15

E-1

Note that the product illustrations in this manual are intended for reference only, x

and so the actual product may appear somewhat different than depicted by an

illustration.

About This Manual

Depending on the model of your watch, display text x

appears either as dark ﬁ gures on a light background, or

light ﬁ gures on a dark background. All sample displays

in this manual are shown using dark ﬁ gures on a light

background.

Button operations are indicated using the letters shown x

in the illustration.

Each section of this manual provides you with the x

information you need to perform operations in each

mode.

MA1104-EA

Operation Guide 3284

E-15

Speciﬁ cations

Accuracy at normal temperature: ±30 seconds a month

Timekeeping: Hour, minutes, seconds, p.m., day, and day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Auto-calendar set at 28 days for February

Alarm: Daily alarm, Hourly time signal

Stopwatch

Measuring units: 1/100 seconds

Measuring capacity: 59 minutes, 59.99 seconds

Measuring modes: Elapsed time, split time, and two ﬁ nishes

Illumination: LED (light-emitting diode)

Battery: One lithium battery

Type: CR1616

Battery life: Approx. 5 years

x 1 second of illumination operation per day

x 20 seconds of alarm operation per day

E-14

While the second’s digits are selected (ﬂ ashing), press 3. to reset the seconds to A

. If you press while the second’s count is in the range of 30 to 59, the seconds A

are reset to and 1 is added to the minutes. If the second’s count is in the range of

00 to 29, the minute’s count is unchanged.

While any other digits (besides seconds) are selected (ﬂ ashing), press 4. to A

increase the number. While the day of the week is selected, pressing advances A

to the next day. Holding down changes the current selection at high speed.A

After you set the time and date, press 5. to return to the Timekeeping Mode.B

If you do not operate any button for one or two minutes while a selection is ﬂ ashing, x

the ﬂ ashing stops and the watch goes back to the Timekeeping Mode automatically.

E-13

Time Setting

Use the Time Setting Mode to set the current time and

date.

To set the time and date

Use 1. to enter the Time Setting Mode (page E-5).B

The second’s digits ﬂ ash because they are selected. x

Press 2. to change the selection in the following C

sequence.

MinutesSeconds

Month

Hour

Day

Day of

the Week

PM indicator

Day of week

Day

Hour : Minutes Seconds

E-12

To measure times with the stopwatch

(a) Elapsed time measurement

A A A A C

Start Stop Re-start Stop Clear

(b) Split time measurement

A C C A C

Start Split

( displayed)SPL

Split release Stop Clear

A C A C C

Start Split

First runner

ﬁ nishes.

Display time of

ﬁ rst runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Clear

E-11

Stopwatch

The Stopwatch Mode lets you measure elapsed time, split

times, and two ﬁ nishes. The range of the stopwatch is

59 minutes, 59.99 seconds.

The stopwatch continues to run, restarting from zero after x

it reaches its limit, until you stop it.

The stopwatch measurement operation continues even if x

you exit the Stopwatch Mode.

Exiting the Stopwatch Mode while a split time is frozen x

on the display clears the split time and returns to elapsed

time measurement.

All of the operations in this section are performed in the x

Stopwatch Mode, which you enter by pressing (page B

E-5).

Mode indicator

Minutes

1/100 second

Seconds

E-10

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch the Daily Alarm and Hourly Time Signal on and off

Press while in the Alarm Mode to change the status of the Daily Alarm and Hourly A

Time Signal in the following sequence.

Both on Both off Daily Alarm only Hourly Time

Signal only

To test the alarm

Hold down while in the Alarm Mode to sound the alarm.A

Produkt Specifikationer

Mærke:	Siemens
Kategori:	Opvaskemaskine
Model:	SN414W01AS
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	598 mm
Dybde:	- mm
Højde:	815 mm
Vægt:	34000 g
Kontroltype:	Buttons, Rotary
Indbygget skærm:	Ja
Strøm:	10 A
Ledningslængde:	1.75 m
Energieffektivitetsklasse (gammel):	A+
Årligt energiforbrug:	290 kWh
Strømforbrug (slukket):	0.1 W
Placering af apparat:	Under bordplade
Installationsrum bredde:	600 mm
Installationsrum dybde:	550 mm
Tilsluttet belastning:	2400 W
Støjniveau:	48 dB
Tilløbsslange, længde:	1.4 m
Antal vaskeprogrammer:	4
Forsinket start-timer:	Ja
Børnesikring:	Ja
Justerbare fødder:	Ja
Understøttede scanningstilstande:	1150 mm
Dør farve:	Hvid
Balje materiale:	Plast
Vaskeklasse:	A
Vandforbrug pr. cyklus:	11.7 L
Indbygget vandblødgører:	Ja
Bestik rum type:	Kurv
Farve på kontrolpanel:	Hvid
Antal kuverter:	12 kuverter
Cyklustid:	210 min.
Forsinket start (maks.):	24 t
Opvaskeprogrammer:	Eco, Normal, Pre-rinse, Quick
Tørringsklasse:	A
Årligt vandforbrug:	3300 L
Automatisk detektering af vaskemiddel:	Ja
Indikator for afspændingsmiddel:	Ja
Energiforbrug pr. cyklus:	1.02 kWh
Selvrensende:	Ja
Antal temperaturindstillinger:	3
AquaSensor funktion:	Ja
AquaStop funktion:	Ja
Glasbeskyttelse:	Ja
Indikator for resterende tid:	Ja
Installationsrum højde (min.):	815 mm
Installationsrum højde (maks.):	875 mm
Udøsslange længde:	1.9 m
Produktstørrelse:	Fuld størrelse (60 cm)
Indkapslet varmeelement:	Ja
Overløbsbeskyttelse:	Ja
Temperatur (maks):	60 °C
Saltindikator:	Ja
Øverste kurv indstillelig højde:	Ja
Tørresystem:	Varmeveksler
Bruttovægt:	36000 g