SIIG CE-MT0012-S1 Manual

SIIG Vægbeslag CE-MT0012-S1

Læs gratis den danske manual til SIIG CE-MT0012-S1 (6 sider) i kategorien Vægbeslag. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16 anmeldelser. Har du et spørgsmål om SIIG CE-MT0012-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

B C D E F G

04-0525A

(x4) bolt (x4) concrete

anchor

(x4) small

washer

(x4) large

washer

(x4) M4X12

screw

(x4) M5X12

screw (x4) M6X12 screw

Fixed LCD TV/Monitor Mount - 10" to 24"

Attach the wall plate to the wall again and insert the bolts (A) and large washers

(D) into the holes (ﬁgure 1-b) and tighten.

Wood Stud Installation

Step 1: Wall Plate Installation

Installation Instructions

Use a high-quality electronic stud ﬁnder (commercially available) to locate dead

center of two studs and mark their locations with a pencil (ﬁgure 1-a).

Hold the wall plate to the wall and mark four locations to be used for mounting the

wall plate.

Take down the plate and drill four holes at the position you've marked.

IMPORTANT: If you don't understand the installation instructions, please consult an

installation specialist

Maintenance

Place your TV screen down on a soft, ﬂat surface, and locate the threaded

mounting points that are located on the back of the display.

According to the size of the display's hole, choose the corresponding screw (E/F/G)

and small washer (C) and insert into the hole as shown (ﬁgure 2-a) and tighten.

Concrete/Brick Wall Installation

Step 2: Display Plate Installation

Position the Wall Plate onto the wall again and insert the bolts (A) and large

washer (D) into the anchor as shown (ﬁgure 1-b) and tighten.

Pre-drill four holes at the positions you've marked and insert one concrete anchor

(B) into each hole.

Place the wall plate against the wall and mark four locations to be used for

mounting the wall plate.

Step 3: Final Installation

Check the mounting screws every two months for tightness.

Hang the display plate onto the top of the

wall plate and slide it onto the wall plate as

shown (ﬁgure 3-a).

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Vægbeslag
Model:	CE-MT0012-S1
Bredde:	120 mm
Dybde:	15 mm
Højde:	120 mm
Vægt:	340 g
Produktfarve:	Sort
Monteringstype:	Væg
Maksimal vægtkapacitet:	15 kg