SIIG CE-MT2611-S1 Manual

SIIG Ikke kategoriseret CE-MT2611-S1

Læs gratis den danske manual til SIIG CE-MT2611-S1 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om SIIG CE-MT2611-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Security Countertop Kiosk & POS

Stand for iPad

Installation Instructions

04-1047B

Unpacking

• Carefully remove the contents and lay them out on cardboard or other protective surface

• Check package contents against the parts list to ensure that all components were received

and undamaged. Do not use damaged or defective parts

• Carefully read all instructions before attempting the installation

Safety Information

• Use proper safety equipment during installation

• If you don't understand the installation instructions, please consult an installation

specialist

• This stand contains small parts which can act as a choking hazard if swallowed

• Do not use this product for any purpose or in any configuration not explicitly specified

in these instructions

Tools Required

• Phillips screwdriver

• Electric drill, 3/16" drill bit and 3/8" masonry drill bit for permanent wood or concrete/

brick installation respectively

Parts List

B - (1x) Support Pole C - (1x) Weighted Base

K - (1x) 4mm Allen Key L - (1x) 5mm Allen Key

A - (1x) iPad Holder

F - (2x) Screw H - (2x) Key

J - (4x) M8x20 Bolt

G - (2x) Concrete Anchor

I - (4x) M5x6 Bolt

D - (4x) Rubber Pad

M - (1x) Plastic Button

E - (1x) Decorative Cover

(2x) 5mm Foam Pad

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Ikke kategoriseret
Model:	CE-MT2611-S1
Bredde:	359 mm
Dybde:	104 mm
Højde:	228 mm
Vægt:	4200 g
Produktfarve:	Hvid
Materiale:	Metal
Kapabilitet:	iPad 2/3/4/Air/Air2
Låsetype:	Nøgle
Hældningsindstilling:	Ja
Minimal skærmstørrelse kompatibilitet:	9.7 "