Silicon Power SP004GBLFU240N02 Manual

Silicon Power Ikke kategoriseret SP004GBLFU240N02

Læs gratis den danske manual til Silicon Power SP004GBLFU240N02 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Silicon Power SP004GBLFU240N02, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Silicon Power LONG-DIMM Installation Guide

Silicon Power manufactures LONG-DIMM DRAM for use in desktop PCs. The instructions on

this page provide general installation and handling information are to be used in conjunction

with your computer's model-specific Owner's Manual.

Installation Procedures

1. Place your computer’s power switch in the off position and disconnect the AC power cord.

2. Follow the instructions in your computer’s Owner's Manual, open the computer’s case to

gain access to the memory module expansion sockets on the motherboard.

3. Check your Owner’s Manual to determine the correct installation sequence for your

computer.

4. To insert the module into an available expansion socket on the motherboard, note how the

module is keyed to the socket. This insures the module can be plugged into the socket one

way only. Firmly press the module into position making certain the module is completely

seated in the socket and the retaining clips have snapped up to lock the module into the

socket.

5. To remove a module, press down on the retaining clips at each end of the module to cause

it to pop-up within the socket for removal.

6. After the module or modules have been installed, close the computer case; reinstall any

cables disconnected during the installation process; and, plug in the AC power cord.

7.Turn on your computer and follow the instructions in your computer’s Owner's Manual to

configure the computer to recognize the new installed Memory or internal computer

component.

Note:

Electrostatic discharges can damage your memory and computer. Touch a grounded,

metal surface before handling your memory or internal computer components

Produkt Specifikationer

Mærke:	Silicon Power
Kategori:	Ikke kategoriseret
Model:	SP004GBLFU240N02
Intern hukommelse:	4 GB
Intern hukommelsestype:	DDR4
Hukommelsesur hastighed:	2400 MHz
Hukommelse form faktor:	288-pin DIMM
Komponent til:	PC/server
Fejlkorrigerende kode:	Ingen
Hukommelsesspænding:	1.2 V
Hukommelseslayout (moduler x størrelse):	1 x 4 GB
Maksimal blænderåbning:	17
Pufret hukommelsestype:	Unregistered (unbuffered)