Silva Trail Speed 5X Manual

Silva lampe Trail Speed 5X

Læs gratis den danske manual til Silva Trail Speed 5X (13 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Silva Trail Speed 5X, eller vil du spørge andre brugere om produktet?

Side 1/13
CHOOSE YOUR LANGUAGE:
FULL VERSION MANUAL
TRAIL SPEED 5X Art. no 37980
To mount the helmet bracket, remove the protective film covering the adhesive tape. Make
sure the surface of the helmet is clean and dry. Press the bracket onto its correct position.
If you do not want to use the adhesive on your helmet the attachment is prepared for mount-
ing with 2 or more straps on the sides. (Not included)
Attach the headlamp in the helmet bracket by sliding the headlamp bracket into the snap-in
socket. To remove, slide the headlamp up and out of the bracket.
Attach the cable by using the back cable guide or integrated helmet strap.
Depending on helmet type, it might be preferable to use the Helmet modeFlow light deac-
tivated, when the headlamp is used on a helmet.
The headband is designed to fit on a helmet by detaching the battery holderthus giving
you the flexibility to use either the included helmet bracket or to just snap the headlamp onto
your helmet and go.
5 green LEDs = Fully charged
4 green LEDs = 80% of the battery remains
3 green LEDs = 60% of the battery remains
2 green LEDs = 40% of the battery remains
1 red LED = 20% of the battery remains
To get as much power as possible out from your battery, keep it away from low temperatures
during use.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.


Produkt Specifikationer

Mærke: Silva
Kategori: lampe
Model: Trail Speed 5X

Har du brug for hjælp?

Hvis du har brug for hjælp til Silva Trail Speed 5X stil et spørgsmål nedenfor, og andre brugere vil svare dig