Singer XL-400 Manual

Singer Symaskine XL-400

Læs gratis den danske manual til Singer XL-400 (112 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Singer XL-400, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/112
INSTRUCTION MANUAL
MANUEL D’INSTRUCTION
MANUAL DE INSTRUCCIONES
“IMPORTANT SAFETY INSTRUCTIONS”
“WARNING
-
To reduce the risk of burns, re, electric shock, or injury to persons: ”
1. “Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children.”
2. “ This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.”
3. “ Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the
manufacturer as contained in this manual.”
4. “ Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment.”
5. “ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.”
6. “ Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot
control free from the accumulation of lint, dust, and loose cloth.”
7. “Never drop or insert any object into any opening.”
8. “ Indoors use only.”
9. “Do not operate where aerosol (spray) products are being used or where oxygen is being administered.”
10. “To disconnect, turn switch to the off („0“) position, then remove plug from outlet.”
11. “ Switch off or unplug the appliance when leaving it unattended, unplug the appliance before carrying out maintenance or
replacing lamps.”
12. “Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.”
13. “Keep ngers away from all moving parts. Special care is required around the sewing machine needle.”
14. “Never sew with a damaged needle plate as this can cause needle to break.”
15. “Do not use bent needles.”
16. “Do not pull or push fabric while stitching. It may deect the needle causing it to break.”
17. “ Switch the sewing machine off (“0”) when making any adjustments in the needle area, such as threading needle, changing
needle, threading bobbin, or changing presser foot, etc.”
18. “ Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.”
19. “ To avoid electrical shock never put the machine nor the mains cable or mains plug into water or other liquids.”
20. “ The LED lamp maximum power is 0.3w, maximum voltage is DC 5v, if the LED lamp is damaged, you should not use the
product and send it to the manufacture or service agent to repair or replace at once.”
21. “ Attention the following to avoid injury:
- Unplug the foot controller of the appliance when leaving it unattended:
- Unplug the foot controller of the appliance before carrying out any maintenance.”
“SAVE THESE INSTRUCTIONS”
“This product is for household use, or equivalent.”
“When using an electrical appliance, basic safety precautions should always be followed, including the following.”
“Read all instructions before using this sewing machine.”
“DANGER
-
-To reduce the risk of electric shock:”
1. “ This sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning.”
FOOT CONTROL (USA & Canada only)
Use Model YC-485 EC or Model JF-1000 with this sewing machine.
POLARIZED PLUGS CAUTION (USA & Canada only)
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended
to t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a
qualied electrician to install the proper outlet. Do not modify the plug in any way.
“CAUTION
-
-
Moving parts-To reduce risk of injury, switch off before servicing. Close cover before operating
machine.”
This appliance complies with EEC Directive 2004/108/EC covering the electromagnetic compatibility.
Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation
relating to electrical/ electronic products. If in doubt please contact your retailer for guidance.
SINGER is a registered trademark of The Singer Company Limited or its afliates.
©2010 The Singer Company Limited or its afliates. All rights reserved.

Produkt Specifikationer

Mærke: Singer
Kategori: Symaskine
Model: XL-400

Har du brug for hjælp?

Hvis du har brug for hjælp til Singer XL-400 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Symaskine Singer Manualer

Singer

Singer Futura 430 Manual

8 September 2025
Singer

Singer Damppresser Manual

7 September 2025
Singer

Singer Needle Guide Manual

22 August 2025
Singer

Singer C5900 Manual

1 August 2025
Singer

Singer C620L Manual

1 August 2025
Singer

Singer M2505 Manual

1 August 2025
Singer

Singer Stylist 9100 Manual

1 August 2025
Singer

Singer Heavy Duty HD6605C Manual

30 Juni 2025
Singer

Singer HD 6705C Manual

31 Maj 2025
Singer

Singer Little Touch & Sew 67A Manual

5 Februar 2025

Symaskine Manualer

Nyeste Symaskine Manualer

Bernette

Bernette b68 Maker Manual

3 Oktober 2025
Necchi

Necchi N 422 Manual

28 September 2025
Necchi

Necchi L234A Manual

27 September 2025
Necchi

Necchi Prima 263 Manual

27 September 2025
Necchi

Necchi NC-103D Manual

27 September 2025
Necchi

Necchi N 424 Manual

27 September 2025
Necchi

Necchi 559 Manual

27 September 2025
Necchi

Necchi M108A Manual

27 September 2025
Necchi

Necchi M213A Manual

27 September 2025
Necchi

Necchi NC-204D Manual

27 September 2025