Skullcandy HESH 540 ANC Manual

Skullcandy Hovedtelefon HESH 540 ANC

Læs gratis den danske manual til Skullcandy HESH 540 ANC (7 sider) i kategorien Hovedtelefon. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Skullcandy HESH 540 ANC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

INITIAL POWER ON & CHARGING SUPPORT:

POWER ON:

To power HESH 540 ANC on for the ﬁrst time, press and hold the power button for 1 second. The LED will pulse BLUE for 4

seconds when powered on.

To power your headphones off, press and hold the power button for 3 seconds. The LED will ﬂash Amber color 3 times when

powered off.

CHARGING:

With ANC on, HESH 540 ANC holds more than 50 hours of playtime.

With ANC off, HESH 540 ANC holds more than 65 hours of playtime.

Every time you power your headphones on, the battery report will tell you how much battery life you have as a percentage. You can

also check your battery life in the Skullcandy App or from your paired device.

To charge your headphones, use the provided USB-C cable. The LED that surrounds the power button will illuminate and pulse in

different colors to indicate the headphone’s current charge level.

A pulsing amber LED means 0%-40%, pulsing white means 41%-90%, and solid white means they are 91%-100% charged.

Pulsing amber = 0%-40%

Pulsing white = 41%- 90%

Solid white = 91% - 100%

When your HESH 540 ANC has about 45 minutes of play time remaining (about 15% charge), and again with about 20 minutes (8%)

of playtime left, a voice prompt will notify you “Battery low.”

With our Rapid Charge feature, a 10-minute charge will provide more than 4 hours of battery play time.

Rapid Charge: 10 minutes = 4 hours

INITIAL PAIRING SUPPORT:

FIRST-TIME PAIRING IS EVEN EASIER WITH GOOGLE FAST PAIR FOR ANDROID. AFTER POWERING YOUR

HEADPHONES ON, YOUR ANDROID DEVICE WILL AUTOMATICALLY PULL UP A PAIRING SCREEN. JUST CLICK

‘CONNECT’ AND YOU’RE PAIRED.

Without Google Fast Pair, Bluetooth pairing is still very simple.

QUICK START VERSION: (WHEN FIRST POWERING ON YOUR HEADPHONES)

1. A tone and a blue LED will indicate that your headphones have powered on

2. A voice prompt will notify you of battery life

3. A voice prompt will say “ANC on”

4. Another voice prompt will then say “Ready to pair” as the LEDs will begin to pulse blue. You are now in Pairing Mode.

5. Open the Bluetooth Settings on your device and find ‘HESH 540 ANC’ in your list of available devices

Another quick way to enter Pairing Mode when your headphones are off is to press and hold the power button for 3 seconds. Your

HESH 540 ANC will power on and enter directly into Pairing Mode.

LE AUDIO COMPATIBILITY:

If the next generation LE Audio technology is compatible and enabled on your device, HESH 540 ANC will automatically determine

if it can pair to LE Audio, or if it will pair to classic Bluetooth.

There will be many new features included with LE Audio in the future, but for now you can enjoy the improved battery life, wireless

signal stability, and audio codec performance.



MULTIPOINT PAIRING: PAIR TO A 2ND NEW DEVICE



(AFTER FIRST TIME PAIRING, WHILE HEADPHONES ARE

POWERED ON AND CONNECTED)

This feature makes it possible to pair your headphones with two devices at once. The connection is managed automatically — you

won’t need to do anything after pairing to the second device.

For example — while watching YouTube videos on your laptop, you can take a call on your phone without the hassle of

disconnecting from one device to pair with another.

With your headphones powered on and connected to one device, you can pair to a second device by pressing the joystick Main

Function Button for 3 seconds.

The voice prompt will say “Ready to pair”

The LEDs will pulse blue

You can select the 2nd device to be paired from its Bluetooth list

A voice prompt will say “Connected”

Once paired to the 2nd device, you will be able to seamlessly stream from either device as needed.

If desired, you can also disable Multipoint Pairing in the Skullcandy App.

WANT TO ADD A NEW DEVICE VIA MULTIPOINT PAIRING? (WHILE ALREADY CONNECTED AND PAIRED TO TWO

DEVICES)

Simply enter into Pairing Mode while connected to the current two devices, and pair normally to the new device.

Once connected to the newly added device, the device that was first paired to your HESH 540 ANC will be disconnected and you are now paired to the two most

recently paired devices via Multipoint.

Note: After powering your headphones off and back on, the two most recently paired devices will always become the default Multipoint duo.