2
Please read this user manual before using this product.
Warning:
- Read the manual prior to using the unit.
- Keep the manual for further reference.
- Keep the packaging so that you can
transport the unit in its original
packaging in order to avoid damage.
- The SkyTec light effect contains a high
light intensity LED. Do not look into the
LED’s. This might damage seriously your eyes.
- For indoor use only.
- Don’t cover any ventilation opening.
- Do not shake the device and avoid brute force when installing or operating the device.
- During installation, nobody should stand beneath the mounting area.
- Installation point/area must be enough for loading 10 times the device’s weight.
- The light effect must be placed at least 50 cm away from inflammable materials such as curtains, books,
etc. Make sure that the housing cannot be touched by accident.
- Prior to the first use, have the unit checked by a qualified person.
- The unit contains voltage carrying parts. DO NOT open the light effect.
- Unplug the unit from the mains prior to repairs, maintenance and replacement of the lamp.
- Never plug or unplug the unit with wet hands.
- Disconnect the unit from the mains prior to replacing the fuse.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
- Repairs has to be carried out by a qualified technician.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz~.
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside the housing.
Please let the unit reach room temperature prior to use.
- When you unplug the unit from the mains always pull the plug, never the lead.
- In order to prevent dropping of the unit, a safety fastening needs to be installed. This can be a solid
chain, a steel cable, etc. which has to be fastened separately from the mounting bracket.
- Use only certificated safety cables which can hold 12 times the weight of the device.
- The maximum drop distance must never exceed 20cm.
- The supplied bracket is the main fixing and must be used to solidly mount the light effect.
- In order to avoid accidents in public premises, the local legal requirements and safety
regulations/warnings must be fulfilled.
- Keep out of the reach of children.
- Never leave this device running unattended.
- The operator has to make sure that safery relating and machine technical installations are approved by
a skilled person regular.
