SmartAVI RK-DVS4P-8S Manual

SmartAVI Splitter RK-DVS4P-8S

Læs gratis den danske manual til SmartAVI RK-DVS4P-8S (2 sider) i kategorien Splitter. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om SmartAVI RK-DVS4P-8S, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
© Copyright 2009 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced or translated into another language
with
out prior written consent from Smart-AVI.
The DVI-I 4 port splitter allows you to use
a single PC/MAC to display
identical images on multiple monitors.
DVS4P
www.smartavi.com
User Manual
2840 N. Naomi Ave.
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Technical Specifications
Input/Output Signal
Pin # Signal SignalPin #
1 T.M.D.S Data 2- 16 Hot Plug Detect
2 T.M.D.S Data 2+ T.M.D.S Data 0-17
3 T.M.D.S Data 2/4 Shield T.M.D.S Data 0+18
4 T.M.D.S Data 4- T.M.D.S Data 0/5 Shield19
5 T.M.D.S Data 4+ T.M.D.S Data 5-20
6 DDC Clock 21 T.M.D.S Data 5+
7 DDC Data 22 T.M.D.S Clock Shield
8 Analog Vert. Sync 23 T.M.D.S Clock+
9 T.M.D.S Data 1- T.M.D.S Clock -24
10 T.M.D.S Data 1+
11 T.M.D.S Data 1/3 Shield C1 Analog Red
12 T.M.D.S Data 3- C2 Analog Green
13 T.M.D.S Data 3+ C3 Analog Blue
14 +5V Power C4 Analog Horz Sync
15 GND C5 Analog Ground
Video Input 1 DVI Female
Video Output 4 DVI Female
Max. Resolution 1920 x 1200 60 @ Hz
Cable Distance to Monitor 10 m (max)
Signal Type Standard DVI Signal
Power Adapter (min) 5VDC 1A
Housing Metal
Weight .65lb (.29kg)
Dimensions (LxWxH) 7.93” x 3.56” x 1.56” m_DVS4P-012709
Specifications
Introduction
The DVS4P splitter allows you to use a single PC to
display identical images on multiple monitors.
DVI Splitter is ideal for:
 Test bench facilities
 Data Center
 Help Desks
Features
 Use PanelLink digital technology
 Supports high-resolution dislplay up to UXGA
(25-165MHz)
 Can be cascaded
 Compliant with the specification of DVI 1.0
Resolution up to 1920 x 1080
No degradation of video quality
External pwer supply
Automatic EDID learning fo the support of
any DVI monitor.
DVI and VGA
Package Contents
 1 DVS4P 4Port DVI splitter
 1 User Manual
 1 Power Adapter 5VDC 1A
Installation
1. Turn off computer and monitor.
2. Connect DVI male extension cable between the
PC and the “video in” port of splitter.
3. Connect the DVI male/female extension cables
between the monitors and the “DVI out” ports
of splitter.
4. Connect the power cord and turn on the
splitter.
5. Turn on PC and monitors.
Operation for Cascade
1. The function to display identical images on
more monitors, is an attachment of another
splitter.
2. Connect the DVI male/female extendion cable
between the former splitter of the “DVI out 1”
port and the latter splitter of the “video in” port.
Note:
Even though you are allowed to cascade the splitter
with varied ports, the image might become unstable
if you cascade too many tiers of splitters.
Installation Diagram
EDID Learning
The Display Data Channel (DDC) is a digital
connection between a computer display and
a graphics adapter that allows the display to
communicate its specifications to the adapter.
The Extended Display Identification Data (EDID) is a
data structure provided by a computer display over
the DDC to describe its capabilities to a graphics
card.
The DVS4P does not continue the DDC across the
CAT6 STP links and contains its own EDID at the
video source input. Therefore, the EDID on the
DVS4P is used in place of the actual monitors EDID.
In order for the computer to output at the correct
resolution and refresh rates for a specific monitor,
the DVS4P must be loaded with the monitors EDID.
On power-up the DVS4P reads and stores the EDID
of the DVI monitor connected to the local loopback
port. IF the local loopback port is disconnected
during power-up, the stored EDID will not be
modified.

Produkt Specifikationer

Mærke: SmartAVI
Kategori: Splitter
Model: RK-DVS4P-8S

Har du brug for hjælp?

Hvis du har brug for hjælp til SmartAVI RK-DVS4P-8S stil et spørgsmål nedenfor, og andre brugere vil svare dig


Splitter SmartAVI Manualer

SmartAVI

SmartAVI RK-DVS4P-8S Manual

21 August 2024
SmartAVI

SmartAVI HDS2PS Manual

19 August 2024
SmartAVI

SmartAVI HDS16P Manual

18 August 2024
SmartAVI

SmartAVI VS4PS Manual

18 August 2024

Splitter Manualer

Nyeste Splitter Manualer

Simplified MFG

Simplified MFG M88KT Manual

27 Juli 2025
Advantech

Advantech EKI-2701MPI-5GPS-A Manual

19 Juli 2025
Advantech

Advantech EKI-2701MPI-5G-AE Manual

19 Juli 2025
Hyundai

Hyundai HYLS8000VE Manual

14 Juli 2025
Samsung

Samsung AM140CXVAJH Manual

8 Juli 2025
Samsung

Samsung AM080CXVAFH Manual

8 Juli 2025
Samsung

Samsung AM100CXVAJH Manual

7 Juli 2025
Samsung

Samsung AM180CXVAFH Manual

7 Juli 2025
Samsung

Samsung AM216BXVGFR Manual

7 Juli 2025
Samsung

Samsung AM060TXMDEC Manual

5 Juli 2025