Smeg SR60GHU3 Manual

Smeg Ovn SR60GHU3

Læs gratis den danske manual til Smeg SR60GHU3 (12 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Smeg SR60GHU3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Table of Contents

WARNING: For your safety, the information in this manual must be followed to minimize the risk

of fire or explosion, or to prevent property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids near this or any other

appliance.

WHAT TO DO IF YOU SMELL GAS

• Do not attempt to switch on any appliances.

• Do not touch any electrical switches.

• Do not use any phones in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

• lf you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the who is able toqualified engineer

install, commission and test the appliance

1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4

2. COOKTOP MEASUREMENTS ............................................................................................... 5

3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 6

3.1 Gas supply requirements ................................................................................................................................ 8

3.2 Electrical requirements .................................................................................................................................... 9

4. INSTALLING THE COOKTOP ............................................................................................... 11

5. CHECKING OPERATION ...................................................................................................... 13

6. WIRING DIAGRAMS ............................................................................................................. 14