Sonance VC60SIM Manual

Sonance Joystick VC60SIM

Læs nedenfor 📖 manual på dansk for Sonance VC60SIM (1 sider) i kategorien Joystick. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
INTRODUCTION
The VC60RIM and VC60SIM are impedance-multiplying stereo volume
controls that feature 12 control positions, soft-touch action and silent
switching capability. The VC60RIM incorporates a rotary control; the
VC60SIM incorporates a slider control. Both volume controls can be safely
used with amplifiers that deliver up to 60 watts RMS per channel.
When properly implemented, Sonance VC60RIM and VC60SIM allow the
safe use of multiple pairs of speakers with amplifiers not specifically-designed
to run the low-impedance loads presented by multiple speakers. Adjustable
impedance jumpers allow as many as 8 pairs of 8-ohm speakers (or 4 pairs of
4-ohm speakers) to be driven by a single 8-ohm capable amplifier.
APPLICATIONS
The VC60RIM and VC60SIM are designed to have a single pair of speakers
connected to a single volume control. Their impedance-multiplying feature
allows multiple volume control/speaker sets to be safely used with a
single amplifier. The included adjustable impedance jumpers can be set to
accommodate different total numbers of speaker/volume control sets.
Important Note: These volume controls are intended for use primarily
in background music systems. The impedance jumpers increase the
impedance seen by the amplifier,
which reduces the amount of power
reaching each pair of speakers
, reducing the speaker’s overall output
capability. The more speakers being driven by a single amplifier
through VC60RIM/SIM controls, the higher the impedance jumpers
must be set and the lower the amount of power that will reach each
speaker. Operating multiple sets of speakers through VC60RIM/SIM
controls with jumpers set lower than recommended in order to increase
the system’s output capability can severely damage the amplifier.
If the system will include a pair of speakers intended for dedicated
higher-volume music listening, we strongly recommend that those
speakers be powered directly by a dedicated amplifier through a VC60R
or VC60S standard volume control.
CONNECTIONS
WARNING: Turn the amplifier’s power OFF until you have completed all of the
connections and have determined that they are correct. (If the amp’s AC plug is
accessible we recommend that you unplug it from the wall outlet to avoid acci-
dental turn-on and possible damage to the amplifier or speakers.)
The VC60RIM and VC60SIM have removable 4-pin screw connectors that
simplify connecting the speakers and amplifier.
1. Bring the wires from the speakers and amp through a backless J-box.
2. Insert the speaker wires as shown into the holes in the 4-pin screw connec-
tors. Make sure to insert the ‘+ and –’ leads into the correct holes
(see illustration, below).
Important: Make sure there are no
stray wires that can touch each
other. Touching wires can cause a
short-circuit that can damage the
amplifier.
Note: The connectors can accommo-
date wire as large as 14 gauge.
3. Using a small flat-blade screw-
driver, tighten the screws to
secure the wires in the connector.
4. Press the 4-pin screw connectors
into the corresponding speaker
terminals on the volume control until they lock into place.
IMPORTANT: Do not reverse the “Input” and “Output” connectors or the
volume control will not operate properly.
5.
C
C
C
C
Co
o
o
o
on
n
n
n
nn
n
n
n
ne
e
e
e
ec
c
c
c
ct
t
t
t
t
o
o
o
o
on
n
n
n
nl
l
l
l
ly
y
y
y
y
1
1
1
1
1
p
p
p
p
pa
a
a
a
ai
i
i
i
ir
r
r
r
r
o
o
o
o
of
f
f
f
f
s
s
s
s
sp
p
p
p
pe
e
e
e
ea
a
a
a
ak
k
k
k
ke
e
e
e
er
r
r
r
rs
s
s
s
s
t
t
t
t
to
o
o
o
o
e
e
e
e
ea
a
a
a
ac
c
c
c
ch
h
h
h
h
v
v
v
v
vo
o
o
o
ol
l
l
l
lu
u
u
u
um
m
m
m
me
e
e
e
e
c
c
c
c
co
o
o
o
on
n
n
n
nt
t
t
t
tr
r
r
r
ro
o
o
o
ol
l
l
l
l.
.
.
.
.Connect multiple
volume controls to the amplifier’s speaker terminals in parallel
(see illustration, below. VC60RIM shown).
MOUNTING
IMPORTANT: Do NOT install the volume control in the same electrical box as
AC house wiring, a light switch or any other high-voltage device or control. The
volume control can share gang boxes with other low-voltage controls such as
A/B speaker switches, infrared receivers, and line-level audio or video devices if
these other devices are rated as Class 2 devices according to the National
Electrical Code.
Use the included hardware to mount the volume control in a single or double
J-box as shown below. (Do not over-tighten the screws.) Attach your choice of
the included Decora® (VC60RIM/S) or standard (VC60RIM only) hardware.
Note: If you are installing the volume control into a typical plastic J-box you will
have to remove the J-box’s back panel to accommodate the control.
I N S T R U C T I O N M A N U A L
V C 6 0 R I M / V C 6 0 S I M
I M P E D A N C E - M U L T I P L Y I N G
V O L U M E C O N T R O L S
FROM AMPLIFIER T O S P E A K E R S
Ω
Right
Speaker
Left
Speaker
Right
Speaker
Left
Speaker
Ω
L
+ –
R
– +
Amplifier/Receiver
SPEAKER OUTPUT
Sonance • 212 Avenida Fabricante • San Clemente, CA 92672-7531, USA
(800) 582-7777 or (949) 492-7777 • FAX: (949) 361-5151
Technical Support: (800) 582-0772
©2005 Dana Innovations, Inc.All rights reserved.
Sonance is a trademark of Dana Innovations, Inc.
Decora is a registered trademark of Leviton Manufacturing Co., Inc.
V C 6 0 R I M
V C 6 0 S I M
IMPEDANCE-MULTIPLYING
VOLUME CONTROLS
INSTRUCTION
M A N U A L
1
Backless
J-Box
Decora
Hardware
Volume
Control
(VC60RIM
shown)
Standard
Hardware
w w w . s o n a n c e . c o m
33-3825 05/05
4


Produkt Specifikationer

Mærke: Sonance
Kategori: Joystick
Model: VC60SIM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonance VC60SIM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Joystick Sonance Manualer

Sonance

Sonance VC60SIM Manual

5 November 2023

Joystick Manualer

Nyeste Joystick Manualer