Sonel MIC-5001 Manual

Sonel Måleudstyr MIC-5001

Læs gratis den danske manual til Sonel MIC-5001 (4 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Sonel MIC-5001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

page 1 / 4 sonel.com

Insulation Resistance Meter

MIC-5001

index: WMGBMIC5001

Product features

• measurement voltage selected within the range of 50…500 V with steps of 50 V and from 500 to 5000 V

with steps of 100 V

• continuous reading of measured insulation resistance or leakage current

• automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement

• sound signalling of ve-second time intervals, facilitating capture of time characteristics

• timing of measurement time T1, T2 and T3 for measurement of dielectric absorption ratio (DAR) and polarization

index (PI)

• reading of actual measurement voltage during measurement

• protection against measurement of live objects

• two- or three-lead method of insulation resistance measurement

• insulation resistance measurement according to the RampTest method and breakdown voltage measurement

with ramping rate up to ~1 kV/s

• measurement of direct and alternating voltages within the range of 0...750 V

• 990-cell memory (11,880 entries), data transmission to PC via USB cable

• power supplied by accumulator

• instruments meet the requirements laid down by standard EN 61557

• the meter can be powered and charged from an external power adapter or from a car lighter socket

Measure insulation resistance up to 5 TΩ

For measurement

of wiring in houses

For measurement

of wires and cables

For measurement

of pole transformer

substations

For measurement

of street lighting

power cables

For measurements

of pre-insulated

pipes

For measurement

of telephone wiring

UISO ≤2500 V

page 2 / 4 sonel.com

Application

Insulation resistance meter with adjustable testing voltage - up to 5 kV. It is

agreat tool for assessing the condition of electrical insulation in residential

buildings, industry, railways and other facilities of general use. Due to its param-

eters-excellent performance, low power consumption from batteries, theop-

tion of charging them during measurements, convenience of use anda high

ingress protection level - it is perfect for maintenance teams, testing motors, ca-

bles, street lighting or at the construction and maintenance of photovoltaic sys-

tems. The meter may be recommended to installers working on telecommuni-

cations and electric power systems that require the inspection of the insulation

sleeve/sheath resistance (UN ≤ 30 kV) to the voltage of 5 kV applied

for5 minutes.

Features

The meter may be used to measure the insulation resistance using the adjust-

able test voltage up to 5000 V. When testing the cables, it automatically dis-

charges their load at the moment of completing the measurement.

MIC-5001 allows the user to determine the insulation resistance by applying

linearly increasing voltage with the slope of 1 kV/s, according to standard

EEEStd 95TM-2002. This functionality is called RampTest.

In contrast the maximum test voltage, this slow and uniform method of apply-

ing test voltage protects the insulation against sudden “electrical stress”. This

process may reveal defects that cannot be observed in classic RISO resistance

measurement. If the tested insulation is weakened or defective, RampTest

will enable the user to determine its maximum withstand voltage. In addition,

this functionality is particularly useful in testing rotating machines or surge

arresters.

The meter has a built-in voltmeter of AC and DC voltages in the range

ofupto750 V. Extensive memory allows the device to record and send to a

computer nearly 12,000 measurement results. Download Sonel Reader soft-

ware from manufacturer’s website to analyse the measurement results and

present them in graphic form, e.g. current or resistance values shown in a func-

tion of time.

Capabilities

An important advantage of the device is its ability to a sufciently long opera-

tion after one recharging of batteries. Electricians performing tests on repeti-

tive objects or at short intervals do not have to worry about batteries discharg-

ing before completing the task. In addition, during the measurement work,

theuser may recharge device from an external power source, e.g. a powerbank

of 12 V/2 Ah.

Produkt Specifikationer

Mærke:	Sonel
Kategori:	Måleudstyr
Model:	MIC-5001

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonel MIC-5001 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Sonel Manualer

Sonel PQM-700 Manual

27 December 2024

Sonel MZC-340-PV Manual

1 September 2024

28 August 2024

28 August 2024

28 August 2024

28 August 2024

28 August 2024

28 August 2024

Sonel MMR-6500 Manual

28 August 2024

Sonel MMR-650 Manual

28 August 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025