Sony HKDW-102 Manual


Læs gratis den danske manual til Sony HKDW-102 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Sony HKDW-102, eller vil du spørge andre brugere om produktet?

Side 1/8
SDTI(HDCAM) INTERFACE BOARD
HKDW-102
OPERATION AND INSTALLATION GUIDE
[Japanese/English]
1st Edition (Revised 3)
HKDW-102 (SY)
3-619-352- (1)04
Printed in Japan
2009.03 13
2002
Sony Corporation
使用にたっHDW-2000/M2000/A2100/M2100
属の「オマニアル 安全のために」お読み
本機て装着す火災感電やその他の事故
辺の物品損害
危険を避ため装着はサた技術者
ご依頼
本機を装着する技術者へ
装着のしかたは、HKDW-102に付属のマニ
ご覧
2
For the customers in the USA
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC Rules.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
For customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe
This product with the CE marking complies with the EMC
Directive issued by the Commission of the European
Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environments: E1 (residential), E2
(commercial and light industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio).
The manufacturer of this product is Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product safety
is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany.
Pour les clients en Europe
Ce produit portant la marque CE est conforme à la Directive
sur la compatibilité électromagnétique (EMC) émise par la
Commission de la Communau européenne.
La conformité à cette directive implique la conformité aux
normes européennes suivantes :
• EN55103-1 : Interférences électromagnétiques (émission)
• EN55103-2 : Sensibilité électromagnétique (immunité)
Ce produit est prévu pour être utilisé dans les
environnements électromagnétiques suivants : E1
(résidentiel), E2 (commercial et industrie légère), E3 (urbain
extérieur) et E4 (environnement EMC contrôlé, ex. studio de
télévision).
Le fabricant de ce produit est Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japon.
Le représentant autorisé pour EMC et la sécurité des
produits est Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Allemagne.
Für Kunden in Europa
Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die
EMV-Richtlinie der EG-Kommission.
Angewandte Normen:
• EN55103-1: Elektromagnetische Verträglichkeit
(Störaussendung)
• EN55103-2: Elektromagnetische Verträglichkeit
(Störfestigkeit)
Für die folgenden elektromagnetischen Umgebungen: E1
(Wohnbereich), E2 (kommerzieller und in beschränktem
Maße industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).
Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japan.
Der autorisierte Repräsentant für EMV und Produktsicherheit
ist Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Deutschland.
Warning
This unit must be installed by qualified service
personnel only. Incorrect installation may cause a fire,
electrical shock, or other accident, resulting in
personal injury or property damage.
Note to service personnel installing the
HKDW-102
Refer to the installation manual supplied with the
HKDW-102 for installation instructions.
Avertissement
Cet appareil doit être installé uniquement par un agent
de service qualifié. Une installation incorrecte pourrait
entraîner un incendie, une décharge électrique ou un
autre incident, se traduisant par des blessures ou des
dégâts matériels.
Note au personnel de service installant la
HKDW-102
Consultez le manuel d’installation fourni avec la
HKDW-102 pour les instructions pour l’installation.
Vorsicht
Diese Einheit darf nur von einem qualifizierten
Servicetechniker eingebaut werden. Bei falschem
Einbau droht die Gefahr von Personen- und
Sachschäden durch Brand, Stromschlag oder Unfall.
Hinweis für das für den Einbau der HKDW-102
zuständige Servicepersonal
Näheres zu den Einbauanweisungen finden Sie in der
Einbauanleitung der HKDW-102.


Produkt Specifikationer

Mærke: Sony
Kategori: Ikke kategoriseret
Model: HKDW-102

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony HKDW-102 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Sony Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer