Sony LBG-H1 Manual

Sony Ikke kategoriseret LBG-H1

Læs gratis den danske manual til Sony LBG-H1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Sony LBG-H1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5-025-582- (1)11

Parts and Controls

Battery charger





 Battery terminal

 Power port

Included items

AC adapter Power cord

Safety Information

WARNING

• A damaged power cord may cause a fire or electric

shock. Observe the following cautions to avoid

damaging the power cord.

– Do not pinch the power cord between the unit and

a table, wall, or other object.

– Do not modify or damage the power cord.

– Do not place heavy objects on the power cord or

pull on the power cord.

– Keep the power cord away from heaters and other

heat sources.

– When you disconnect the power cord, always hold

it by the plug.

• Do not wrap the power cord around the AC adapter.

This may cause the cord to break.

• Disconnect the AC adapter and power cord before

moving the product. Otherwise, the AC adapter and

power cord may be damaged, resulting in a fire or

electric shock.

Also, take care not to drop the product.

• For safety reasons, if the product is not to be used for

long periods, unplug it from the wall outlet.

• Do not place or store the product in a location

exposed to direct sunlight or close to a heater.

• Do not use or store the product where there is

excessive oily smoke, steam, moisture, or dust. This

may cause a fire or electric shock. Use or storage in

an environment other than the operating conditions

described in this manual may cause a fire or electric

shock.

• Do not let water or foreign objects get inside the unit.

This may cause a fire or electric shock. If water or

foreign objects get inside the unit, remove the battery

pack from the unit immediately, and disconnect the

AC adapter and power cord.

• Do not disassemble the product. Disassembly or

modification of the unit and the included AC adapter

or power cord may cause a fire or electric shock.

• Use only the included AC adapter. Use of a different

AC adapter may cause a fire, electric shock, or

malfunction.

• Do not charge the battery pack if there is a possibility

of lightning strike. A lightning strike may cause an

electric shock. If lightning is likely, unplug the product

from the wall outlet to prevent a fire, electric shock, or

product failure. Also, if you hear thunder, refrain from

touching the product.

• Use only the battery pack exclusively for this unit. Use

of a different battery pack may cause a fire or electric

shock.

• Do not operate the product or touch the power cord

with wet hands. This may cause an electric shock.

• Use the included power cord. The included power

cord is for use exclusively with this unit, and cannot be

used with other products.

Also, use only the included power cord with the unit.

Use of a different power cord may generate heat,

causing a fire or electric shock.

• Do not use the unit while it or the AC adapter is

covered by a cloth or other object.

• Unplug the product from the wall outlet before

cleaning it with a dry cloth.

• Firmly connect the connectors.

– Do not insert metal objects into the connector

ports. This may short-circuit the pins and cause a

fire.

– Insert the connectors straight into the ports. When

inserting the connectors, do not apply excessive

force to the ports.

• This product is designed for use only in the U.S.A.

– Use with 120 V AC power.

– Use with other voltages, such as in other countries

or regions, may cause a fire or electric shock. Note

that the AC adapter and power cord may support

different input voltages. Be sure to check the

descriptions of the AC adapter and power cord.

CAUTION

• Do not subject the product to strong impacts. If you

apply excessive force to the product, such as by

putting a heavy object on top of it, dropping it, or

stepping on it, this may cause an injury or product

failure.

• Keep the product away from infants and young

children.

Compliance Information

Supplier’s Declaration of Conformity

Trade Name: SONY

Model: LBG-H1

Responsible Party: Sony Electronics Inc.

Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.

Telephone Number: 858-942-2230

Note:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications

not expressly approved in this manual could void your

authority to operate this equipment.

Notes on Use

• This product is designed for use only in the U.S.A.

Operation is not guaranteed when used in other

countries or regions.

• Do not connect the AC adapter to an electronic

transformer (travel converter). This may cause heat

generation or product failure.

About charging

• Two battery packs can be inserted into the unit, but

they cannot be charged at the same time. After one

battery pack is fully charged, the other will start

charging.

• It may take about 20 seconds to start charging. Wait

until the battery level LEDs on the battery pack blink.

• If the battery temperature is too high or low, charging

will not start due to the protection function. When the

battery temperature enters the chargeable range in

a room-temperature environment, charging will start

automatically.

• If charging does not start indefinitely, remove the

battery pack from the unit, unplug the AC adapter

power cord from the wall outlet, and then reconnect

it. If charging still does not start, refer to our support

website for a solution.

https://www.sony.com/electronics/support

Caution when carrying the unit

When carrying the unit, take care not to drop it. If the

unit is dropped, this may cause damage to the unit or

injuries.

Battery Charger

Operating Instructions

LBG-H1

Printed in Japan

Produkt Specifikationer

Mærke:	Sony
Kategori:	Ikke kategoriseret
Model:	LBG-H1

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony LBG-H1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sony Manualer

Sony PlayStation Portal Manual

10 Juli 2025

Sony UP-DP10 Manual

10 Juli 2025

Sony SNCA-WP602 Manual

10 Juli 2025

Sony PCS-G60 Manual

9 Juli 2025

Sony AC-DN10 Manual

9 Juli 2025

Sony CEB-G1920T Manual

9 Juli 2025

9 Juli 2025

9 Juli 2025

8 Juli 2025

8 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Asrock Rack SPC621D8 Manual

16 Juli 2025

For.A FA-10DCCRU Manual

16 Juli 2025

CYP AU-DTO4-RX Manual

16 Juli 2025

Levenhuk Zeno Lamp ZL23 Manual

16 Juli 2025

Motorola MiT3000 Manual

16 Juli 2025

Hillvert HT-PT-360 Manual

16 Juli 2025

CYP PUV-1610RX Manual

16 Juli 2025

Rockville RM50RT-B Manual

16 Juli 2025

DS18 RCNLP/BK Manual

16 Juli 2025

CYP EL-7500V Manual

16 Juli 2025