Sony NXL-FR316 Manual

Sony Ikke kategoriseret NXL-FR316

Læs gratis den danske manual til Sony NXL-FR316 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Sony NXL-FR316, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
4-741-570- (1)12
Before operating the unit, please read this manual thoroughly and retain
it for future reference.
L-1_4-741-570-11(1)_201803061455_GB_1/30
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
S-1_4-741-570-11(1)_201803061455_GB_2/30
WARNING
This apparatus must be earthed.
S-2_4-741-570-11(1)_201803061455_GB_3/30
CAUTION
• There is a danger of explosion if a battery other than specified is
charged. Do not charge batteries other than the recommended
batteries.
• When you dispose of the battery or the product, you must obey
the law in the corresponding area or country. Do not dispose of the
battery or the product in a fire or a hot oven, or mechanically crush
or cut the battery. It may explode or cause a fire.
• Do not place the battery in a high temperature place, such as under
direct sunlight or near fire. It may ignite, explode, or cause a fire. Do
not immerse or wet the battery in water or seawater. This may cause
an electric shock.
S-4C_4-741-570-11(1)_201803061455_GB_4/30
WARNING
This unit has no power switch.
When installing the unit, incorporate a readily accessible disconnect
device in the fixed wiring, or connect the power plug to an easily
accessible socket-outlet near the unit. If a fault should occur during
operation of the unit, operate the disconnect device to switch the power
supply off, or disconnect the power plug.
S-5_4-741-570-11(1)_201803061455_GB_5/30
WARNING
Using this unit at a voltage other than 120 V may require the use of a
different line cord or attachment plug, or both. To reduce the risk of fire
or electric shock, refer servicing to qualified service personnel.
S-11_4-741-570-11(1)_201803061455_GB_6/30
This symbol is intended to alert the user to the presence
of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
S-14_4-741-570-11(1)_201803061455_GB_7/30
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is supplied power from an
outlet on the rack, please make sure that the rack does not overload the
supply circuit.
2. Providing protective earth
When this product is installed in a rack and is supplied power from an
outlet on the rack, please confirm that the outlet is provided with a
suitable protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make sure that the
internal air ambient temperature of the rack is within the specified limit
of this product.
4. Prevention against achieving hazardous condition due to uneven
mechanical loading
When this product is installed in a rack, please make sure that the
rack does not achieve hazardous condition due to uneven mechanical
loading.
5. Install the equipment while taking the operating temperature of the
equipment into consideration
For the operating temperature of the equipment, refer to the
specifications of the Operation Manual.
6. When performing the installation, keep the following space away
from walls in order to obtain proper exhaust and radiation of heat.
Right, Left : 4 cm
(1.6 inches) or more
Rear : 10 cm
(4 inches) or more
S-26E_4-741-570-11(1)_201803061455_GB_8/30
CAUTION
For safety, do not connect the connector for peripheral device wiring that
might have excessive voltage to the following port:
• NETWORK connector
S-28B_4-741-570-11(1)_201803061455_GB_9/30
WARNING: THIS WARNING IS APPLICABLE FOR USA ONLY.
If used in USA, use the UL LISTED power cord specified below.
DO NOT USE ANY OTHER POWER CORD.
Plug Cap Parallel blade with ground pin
(NEMA 5-15P Configuration)
Cord Type SJT, three 16 AWG wires
Length Minimum 1.5 m (4 ft 11 in), Less than
4.5 m (14 ft 9 in)
Rating Minimum 10 A, 125 V
Using this unit at a voltage other than 120V may require the use of a
different line cord or attachment plug, or both. To reduce the risk of fire
or electric shock, refer servicing to qualified service personnel.
WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES.
1. Use the approved Power Cord (3-core mains lead) / Appliance
Connector / Plug with earthing-contacts that conforms to the safety
regulations of each country if applicable.
2. Use the Power Cord (3-core mains lead) / Appliance Connector /
Plug conforming to the proper ratings (Voltage, Ampere).
If you have questions on the use of the above Power Cord / Appliance
Connector / Plug, please consult a qualified service personnel.
S-29B_4-741-570-11(1)_201803061455_GB_10/30
This equipment is not suitable for use in locations where children are
likely to be present.
S-76_4-741-570-11(1)_201803061455_GB_11/30
CAUTION
Danger of explosion if battery is incorrectly replaced.
When the internal battery needs to be replaced, please contact a
qualified service person.
Danger of fire or explosion.
When you dispose of the battery or the product, you must obey the law
in the relative area or country.
Do not dispose of the battery or the product into a fire or a hot oven, or
mechanically crush or cut the battery.
Danger of fire, explosion or electric shock.
Avoid operating or storing the product in the following locations.
• Extremely hot or cold places (for operating temperature, see
Installation Manual.)
• Locations where corrosive gas or flammable gas is emitted, or where
salt damage may occur.
S-78_4-741-570-11(1)_201803061455_GB_12/30
For the customers in the U.S.A.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
E-5_4-741-570-11(1)_201803061455_GB_13/30
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
E-7_4-741-570-11(1)_201803061455_GB_14/30
All interface cables used to connect peripherals must be shielded in
order to comply with the limits for a digital device pursuant to Subpart B
of part 15 of FCC Rules.
E-8_4-741-570-11(1)_201803061455_GB_15/30
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
E-9_4-741-570-11(1)_201803061455_GB_16/30
For the customers in Canada
CAN ICES-3 (A)/NMB-3(A)
E-12_4-741-570-11(1)_201803061455_GB_17/30
For the customers in Europe
This product is intended for use in the following Electromagnetic
Environment: E4 (controlled EMC environment, ex. TV studio).
E-20_4-741-570-11(1)_201803061455_GB_18/30
WARNING
Operation of this equipment in a residential environment could cause
radio interference.
E-22H_4-741-570-11(1)_201803061455_GB_19/30
For the customers in Europe
This apparatus shall not be used in the residential area.
E-36_4-741-570-11(1)_201803061455_GB_20/30
경고
화재나 감전 위험을 방지하려면 장치가 물기나 습기에 노출되지 않도록 하십시오.
감전 위험이 있으므로 본체를 열지 마십시오. 자격 있는 전문 정비 요원만 서비스를
실시해야 합니다.
S-1_4-741-570-11(1)_201803061455_KR_21/30
경고
이 기기는 접지되어야 합니다.
S-2_4-741-570-11(1)_201803061455_KR_22/30
주의
• 지정된것이외의배터리를충전하는경우폭발할위험이있습니다.권장배터리
외에는충전하지마십시오.
• 배터리또는제품을폐기할때는해당지역또는국가의법률을따라야합니다.
불이나뜨거운오븐에배터리를넣거나,배터리를기계적으로손상시키거나절단하지
마십시오.폭발하거나화재의원인이될수있습니다.
• 직사광선이비추는장소나불옆등과같이고온의장소에배터리를두지마십시오.
점화,폭발하거나화재의원인이될수있습니다.배터리를물이나바닷물에넣거나
젖게하지마십시오.감전을일으킬수있습니다.
S-4C_4-741-570-11(1)_201803061455_KR_23/30
어린이가있을가능성이있는장소에서본장비를사용하는것은적합하지않습니다.
S-76_4-741-570-11(1)_201803061455_KR_24/30
이기기는업무용환경에서사용할목적으로적합성평가를받은기기로서가정용환경에서
사용하는경우전파간섭의우려가있습니다. 
E-29_4-741-570-11(1)_201803061455_KR_25/30
注意
• 對非指定型號電池充電會有爆炸的危險。請勿對非推薦型
號的電池充電。
• 棄置電池或本產品時，必須遵照相關區域或國家的法律。
請勿以將電池或本產品投入火中或高熱烤箱的方式加以棄
置，否則可能會爆炸或引發火災。
• 請勿將電池置於高溫場所，如陽光直射處或靠近火源處，
否則可能會著火、爆炸或引發火災。請勿將電池浸入淡水
或海水中，否則可能會造成觸電。
S-4C_4-741-570-11(1)_201803061455_CT_26/30
本設備不適用於孩童可能出現的場所。
S-76_4-741-570-11(1)_201803061455_CT_27/30
警告使用者：
此為甲類資訊技術設備，於居住環境中使用時，可能會造成
射頻擾動，在此種情況下，使用者會被要求採取某些適當的
對策。
E-32_4-741-570-11(1)_201803061455_CT_28/30
For kundene i Norge
Dette utstyret kan kobles til et IT-strømfordelingssystem.
S-56_4-741-570-11(1)_201803061455_NO_29/30
For the customers in the U.S.A.
SONY LIMITED WARRANTY- Please visit http://www.sony.com/psa/
warranty for important information and complete terms and conditions
of Sony’s limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY - Please visit http://www.sonybiz.ca/pro/
lang/en/ca/article/resources-warranty for important information and
complete terms and conditions of Sony’s limited warranty applicable to
this product.
For the customers in Europe
Sony Professional Solutions Europe - Standard Warranty and Exceptions
on Standard Warranty. Please visit http://www.pro.sony.eu/warranty
for important information and complete terms and conditions.
For the customers in Korea
SONY LIMITED WARRANTY - Please visit http://bpeng.sony.co.kr/
handler/BPAS-Start for important information and complete terms and
conditions of Sony’s limited warranty applicable to this product.
L-5_4-741-570-11(1)_201803061455_GB_30/30
For the State of California, USA only
Perchlorate Material – special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
For the customers in Taiwan only
Türkiye’deki müşteriler için
AEEE Yönetmeliğine Uygundur
Overview
This product is a bridge device for transferring SDI input/output signals on a 4K
live production system via a network. Up to 16 optional boards that are 3 rack
units in size can be mounted in the unit.
Parts Identification
Front
1 STATUS indicator
For details, see the “Status Indicator” section.
2 BEACON indicator
This is blinks blue in sync with the beacon lamp of any optional board that is
installed on the unit.
3 Front panel LED
This lights blue when the unit is turned on (depending on settings).
SIGNAL PROCESSING
UNIT
Operation Manual
© 2018 Sony Corporation Printed in Japan
NXL-FR316
Rear
1 Fan unit (A, B)
2 Power connectors (A, B)
3 Ground connector
4 REFERENCE IN connectors
5 AUX IN connector (for future expansion)
6 NETWORK connector
CAUTION
When you connect the NETWORK connector cable of the unit to peripheral
device, use a shielded-type cable to prevent malfunction due to radiation
noise.
7 STATUS OUT connector
Outputs errors occurring on the unit or the optional boards installed on the
unit.
8 RESET CIRCUIT BREAKER button
When an overcurrent occurs due to a short circuit, for example, this button
pops up and the circuit is shut off.
Installation
To use this unit, settings must be configured according to the installation
manual. For details on acquiring the installation manual, contact your local Sony
service representative.
Status Indicator
The following states of the unit are indicated by the state of the status indicator.
Indicator Status Solution
Lit green Indicates that the unit is
operating normally.
—
Blinking
orange
Indicates a warning that has
no immediate affect on normal
operation.
Example:
The replacement cycle of the
power supply fan or on-board
fan has been reached.
The date and time
information has been reset.
A mismatch in video input
signal formats or a signal error
has been detected by the
optional board.
Check the cables connected to
the unit and the status of the
signals.
If the status indicator does not
light green despite a lack of
problems with the cables and
signals, contact your local Sony
service representative.
Indicator Status Solution
Lit red Indicates that the unit is not
turned on despite the presence
of a power supply.
Example:
The CPU does not start
properly.
Restart the unit.
If the status indicator lights
or blinks red even after the
unit is restarted, discontinue
operation of the unit and
contact your local Sony service
representative.
Blinking
red
Indicates that a critical error that
will affect normal operation has
occurred.
Example:
The unit restarted in recovery
mode.
A temperature error has
occurred inside the casing.
A power supply voltage error
has occurred.
A power supply unit error has
occurred.
A fan stop error has been
detected.
An error that requires a unit
restart has been detected.
A critical error has occurred
on the optional board.
Off Indicates that power is not
being supplied or that the CPU
is not operating properly.
If the indicator is off despite the
presence of a power supply,
restart the unit.
If the status indicator remains off
even after the unit is restarted,
discontinue operation of the
unit and contact your local Sony
service representative.
Usage Precautions
Condensation
If the unit is suddenly taken from a cold to a warm location, or if ambient
temperature suddenly rises, moisture may form on the outer surface of the unit
and/or inside of the unit. This is known as condensation. If condensation occurs,
turn off the unit and wait until the condensation clears before operating the unit.
Operating the unit while condensation is present may damage the unit.
Consumable parts
The fan is a consumable part that will need periodic replacement.
When operating at room temperature, a normal replacement cycle will be about
5 years.
However, this replacement cycle represents only a general guideline and does
not imply that the life expectancy of this part is guaranteed. For details on parts
replacement, contact your dealer.
The life expectancy of the electrolytic capacitor is about 5 years under normal
operating temperatures and normal usage (8 hours per day; 25 days per month).
If usage exceeds the above normal usage frequency, the life expectancy may be
reduced correspondingly.
Precautions for Network-enabled Devices
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A
FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION
DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.
Depending on the operating environment, unauthorized third parties on
the network may be able to access the unit. When connecting the unit to the
network, be sure to confirm that the network is protected securely.
From a safety standpoint, when using the unit connected with the network, it
is strongly recommended to access the Control window via a Web browser and
change the access limitation settings from the factory preset values. (Refer to the
installation manual.)
Changing the password regularly is also recommended.
Do not browse any other website in the Web browser while making settings or
after making settings. Since the login status remains in the Web browser, close
the Web browser when you complete the settings to prevent unauthorized third
parties from using the unit or harmful programs from running.
Specifications
General specifications
Power supply AC 100 V to 240 V +/–10% 50/60 Hz, dual
Power consumption
800 W
Dimensions 440 × 132 × 440 mm (17 3/8 × 5 1/4 × 17 3/8 in.) (W × H × D)
Mass Approx. 14 kg (30 lb. 14 oz.)
Temperature ranges
Operation guaranteed temperature: 5 °C to 40 °C (41 °F to 104 °F)
Performance guaranteed temperature: 10 °C to 35 °C (50 °F to
95 °F)
Storage temperature: –20 °C to +60 °C (–4 °F to +140 °F)
I/O specifications
REFERENCE IN
Connector BNC type (2), loop through 75 Ω
Number of lines
1 (loop through)
Signal formats
HD tri-level sync, analog black burst, analog sync
STATUS OUT
Connector D-sub 15-pin (female)
Signal formats
Open collector
NETWORK
Connector RJ-45
Number of lines
1
Signal formats
Ethernet 100Base-TX compliant
AUX-IN
Connector BNC type (1)
Supplied accessories
Operation manual (1)
Optional accessories
RMM-10 Rack Mount Kit
Power cord (Service Parts No.: 1-846-048-1X (USA, Canada), 1-551-631-XX (EU))
Design and specifications are subject to change without notice.
This product uses μT-Kernel source code under μT-License granted by the
T-Engine Forum (www.tron.org).
Notes
Always verify that the unit is operating properly before use. SONY WILL
NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF
THIS UNIT OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION
OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.

Produkt Specifikationer

Mærke: Sony
Kategori: Ikke kategoriseret
Model: NXL-FR316

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony NXL-FR316 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Sony Manualer

Sony

Sony PlayStation Portal Manual

10 Juli 2025
Sony

Sony UP-DP10 Manual

10 Juli 2025
Sony

Sony SNCA-WP602 Manual

10 Juli 2025
Sony

Sony PCS-G60 Manual

9 Juli 2025
Sony

Sony AC-DN10 Manual

9 Juli 2025
Sony

Sony CEB-G1920T Manual

9 Juli 2025
Sony

Sony AC-DN10A Manual

9 Juli 2025
Sony

Sony BKM-V12 Manual

9 Juli 2025
Sony

Sony CFV-E20D Manual

8 Juli 2025
Sony

Sony BP-U90 Manual

8 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Asrock

Asrock Rack SPC621D8 Manual

16 Juli 2025
For.A

For.A FA-10DCCRU Manual

16 Juli 2025
CYP

CYP AU-DTO4-RX Manual

16 Juli 2025
Levenhuk

Levenhuk Zeno Lamp ZL23 Manual

16 Juli 2025
Motorola

Motorola MiT3000 Manual

16 Juli 2025
Hillvert

Hillvert HT-PT-360 Manual

16 Juli 2025
CYP

CYP PUV-1610RX Manual

16 Juli 2025
Rockville

Rockville RM50RT-B Manual

16 Juli 2025
DS18

DS18 RCNLP/BK Manual

16 Juli 2025
CYP

CYP EL-7500V Manual

16 Juli 2025