Sony ZV-E10 II Manual

Sony Kamera ZV-E10 II

Læs gratis den danske manual til Sony ZV-E10 II (2 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Sony ZV-E10 II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Interchangeable Lens Digital Camera

Startup Guide

5-061-830- (1)11

E-mount

ZV-E10M2

Preparations

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)

• Rechargeable battery pack

NP-FZ100 (1)

• Wind screen (1) (attached to the

wind screen adaptor)

• Wind screen adaptor (1)

• Shoulder strap (1)

• Body cap (1)*

* Only for the ZV-E10M2

• Startup Guide (this manual) (1)

• Reference Guide (1)

Inserting the battery pack (supplied)/memory card

(sold separately) into the camera

Open the battery cover and the memory card cover, insert the battery/

memory card, and close the covers.

Insert the battery pack while

pressing the lock lever.

Ensure the notched corner

faces correctly.

This camera is compatible with SD memory cards.

When you use a memory card with this camera for the first time,

format the card using the camera in order to stabilize the performance

of the memory card.

About the “Help Guide”

For detailed instructions on using the camera, refer

to the “Help Guide” (web manual).

https://rd1.sony.net/help/ilc/2430/h_zz/

ZV-E10M2 Help Guide

Charging the battery pack

Charge lamp

To an external power

source



Turn the power off.

• If the camera is turned on, the battery pack

will not be charged.



Using a commercially available

USB Type-C cable, connect the USB Type-C

terminal on the camera to an external

power source, such as a commercially

available USB AC adapter or mobile

battery.

• The charge lamp will light up when charging

starts. When the charge lamp turns off,

charging is completed.

This camera is compatible with USB-PD (USB Power Delivery). When

a device compatible with USB-PD is connected to the camera, fast

charging is possible. We recommend using a USB-PD device that is

compatible with an output of 9V/3A or 9V/2A.

Attaching a lens

Mounting indexes



Mount the lens by aligning the two white

index marks (mounting indexes) on the

lens and camera.



While pushing the lens lightly toward

the camera, turn the lens slowly in the

direction of the arrow until it clicks into

the locked position.

Performing initial setup for the camera

By establishing a Bluetooth connection (pairing) between the camera

and a smartphone, you can perform initial camera setup such as

date and time settings from the smartphone. Install the dedicated

application on your smartphone in advance, and then follow steps





under “Procedures for initial camera setup.”

Installing the dedicated smartphone application

Install the application from the following website.

Also, update to the latest version of the dedicated

application. The specifications of the dedicated

application may change without notice.

https://www.sony.net/ca/

Procedures for initial camera setup

ON/OFF (Power) switch

Control wheel/

center button



Set the ON/OFF (Power) switch to “ON” to

turn on the camera.



Select the desired language and then

press the center of the control wheel.

• The privacy notice screen will appear. Read

the privacy notice regarding biometrics by

opening the link using your smartphone, etc.



Press the center of the control wheel.



Follow the instructions on the camera

screen to connect the camera with your

smartphone and perform the initial

setup.

• You can also configure or change the initial

settings later from the MENU of the camera.

Connecting (pairing) the camera with your smartphone later

For details on the connection method, refer to the

following Help Guide URL:

https://rd1.sony.net/help/ilc/2430_pairing/h_zz/

Shooting movies

Still/Movie/S&Q switch

MOVIE (Movie)

button

MENU button



Set the Still/Movie/S&Q switch to

(Movie).



Press the MENU button and select

(Shooting) [Shooting Mode]  

[

Shoot Mode] the desired 

shooting mode.



Press the MOVIE (Movie) button to start

recording.



Press the MOVIE (Movie) button again to

stop recording.

Using the wind screen (supplied)

Wind screen

Multi Interface Shoe

Use the wind screen to reduce wind noise

picked up by the internal microphone when

recording a movie.

Attach the wind screen to the Multi Interface

Shoe.

Notes on use

Refer to “Precautions” in the “Help Guide” as well.

Notes on handling the product

• Do not leave the lens exposed to a strong light source such as sunlight. Because of the

lens’s condensing function, doing so may cause smoke, fire, or a malfunction inside the

camera body or the lens. If you have to leave the camera exposed to a light source such

as sunlight, attach the lens cap to the lens.

• If sunlight or other strong light enters the camera through the lens, it may focus inside

the camera and cause smoke or fire. Attach the lens cap when storing the camera. When

shooting with backlighting, keep the sun sufficiently far away from the angle of view.

Even if it is slightly away from the angle of view, smoke or fire may still occur.

• Do not look at sunlight or a strong light source through the lens when it is detached. This

may result in unrecoverable damage to the eyes or cause a malfunction.

• This camera (including accessories) has magnet(s) which may interfere with pacemakers,

programmable shunt valves for hydrocephalus treatment, or other medical devices.

Do not place this camera close to persons who use such medical devices. Consult your

doctor before using this camera if you use any such medical device.

• Increase the volume gradually. Sudden loud noises can damage your ears. Be especially

careful when listening to headphones.

• Do not leave the camera, the supplied accessories, or memory cards within the reach of

infants. They may be accidentally swallowed. If this occurs, consult a doctor immediately.

• If the monitor is damaged, stop using the camera immediately. The damaged parts may

harm your hands, face, etc.

• When shooting still images continuously, the monitor may flash between the shooting

screen and a black screen. If you keep watching the screen in this situation, you may

experience uncomfortable symptoms such as feeling of unwellness. If you experience

uncomfortable symptoms, stop using the camera, and consult your doctor as necessary.

• When recording or streaming for long periods of time or recording 4K movies, if the

same part of your skin touches the camera for a long period of time while using the

camera, even if the camera does not feel hot to you, it may cause symptoms of a low-

temperature burn such as redness or blistering. Pay special attention in the following

situations and use a tripod, etc.

- When using the camera in a high temperature environment

- When someone with poor circulation or impaired skin sensation uses the camera

- When using the camera with [Auto Power OFF Temp.] set to [High]

Sony lenses/accessories

Using this unit with products from other manufacturers may affect its performance,

leading to accidents or malfunction.

Note on the 5GHz band for wireless LAN

When using the wireless LAN function outdoors, set the band to 2.4GHz by following the

procedure below. (WW293541 only)

• MENU (Network) [Wi-Fi] [Wi-Fi Frequency Band]  

How to turn off wireless network functions (Wi-Fi, etc.) temporarily

When you board an airplane, etc., you can turn off all wireless network functions

temporarily using [Airplane Mode].

WW293541/WW751104

Compatible iPhone/iPad models

iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15, iPhone 14 Pro Max,

iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (3rd generation), iPhone 13 Pro Max,

iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12,

iPhone 12 mini, iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11,

iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPad Air (3rd,

4th, and 5th generation), iPad (6th through 10th generation), iPad mini (6th generation),

iPad Pro 12.9-inch (1st through 6th generation), iPad Pro 11-inch (1st through 4th

generation), iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad mini (5th generation)

(As of February 2024)

Trademarks/Licenses

• is a trademark of Sony Group Corporation.

• Apple, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other

countries.

• USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

• Wi-Fi, the Wi-Fi logo and Wi-Fi Protected Setup are registered trademarks or trademarks

of the Wi-Fi Alliance.

• The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its

subsidiaries is under license.

• QR Code is a trademark of Denso Wave Inc.

• In addition, system and product names used in this manual are, in general, trademarks or

registered trademarks of their respective developers or manufacturers. However, the ™

or  marks may not be used in all cases in this manual.

IMPORTANT – Read the End User Software License Agreement before using your Sony

product.

Using your product indicates your acceptance of the End User Software License

Agreement. The software license agreement between you and Sony is available at the

following URL:

(https://rd1.sony.net/help/di/el23/h_zz/)

• Use of the Made for Apple badge means that an accessory has been designed to

connect specifically to the Apple product(s) identified in the badge, and has been

certified by the developer to meet Apple performance standards. Apple is not

responsible for the operation of this device or its compliance with safety and regulatory

standards.

For Customers in the U.S.A. and Canada

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment

has very low levels of RF energy that is deemed to comply without testing of specific

absorption rate (SAR).

This equipment has been tested and found to comply with ISED radiation exposure limits

set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency

(RF) Exposure rules.

The available scientific evidence does not show that any health problems are associated

with using low power wireless devices. There is no proof, however, that these low power

wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio

frequency energy (RF) in the microwave range while being used. Whereas high levels of

RF can produce health effects (by heating tissue), exposure of low-level RF that does not

produce heating effects causes no known adverse health effects. Many studies of low-

level RF exposures have not found any biological effects. Some studies have suggested

that some biological effects might occur, but such findings have not been confirmed by

additional research.

For Customers in the U.S.A.

For question regarding your product or for the Sony Service Center nearest you, call 1-800-

222-SONY (7669) .

Supplier’s Declaration of Conformity

Trade Name : SONY

Model : WW293541

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A.

Telephone Number : 858-942-2230

This product contains a button cell or coin battery.

WARNING

• INGESTION HAZARD: This product

contains a button cell or coin battery.

• DEATH or serious injury can occur if

ingested. • A swallowed button cell or

coin battery can cause Internal Chemical

Burns 2 hours. • KEEP in as little as new

and used batteries OUT OF REACH of

CHILDREN • Seek immediate medical

attention if a battery is suspected to be

swallowed or inserted inside any part of

the body.

• Remove and immediately recycle or dispose of used batteries according to local

regulations and keep away from children. Do NOT dispose of batteries in household trash

or incinerate.

• Even used batteries may cause severe injury or death.

• Call a local poison control center for treatment information.

• Non-rechargeable batteries are not to be recharged.

• Do not force discharge, recharge, disassemble, heat above 55 °C (131 °F) or incinerate.

Doing so may result in injury due to venting, leakage or explosion resulting in chemical

burns.

This product contains a non-replaceable button/coin cell battery.

Battery type: ML621 or MS621

Nominal Voltage: 3 V

Important note on use of 5 GHz wireless LAN

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed down through the

MAC, through the digital and analog baseband, and finally to the RF chip. Several special

packets are initiated by the MAC. These are the only ways the digital baseband portion will

turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the

transmitter will be on only while one of the aforementioned packets is being transmitted.

In other words, this device automatically discontinue transmission in case of either

absence of information to transmit or operational failure.

Frequency Tolerance: ±20 ppm

For Customers in Canada

5150-5350 MHz band is restricted to indoor operation only.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-

5350MHz and 5650-5850MHz and that these radars could cause interference and/or

damage to LE-LAN devices.

For Customers in Europe

IEEE802.11b/g/n 2 400 MHz < 60 mW e.i.r.p.

IEEE802.11a/n/ac 5 150 - 5 350 MHz

5 470 - 5 725 MHz

< 35 mW e.i.r.p.

IEEE802.11a/n/ac 5 725 - 5 850 MHz < 25 mW e.i.r.p.

Bluetooth 2 400 MHz < 10 mW e.i.r.p.

Hereby, Sony Corporation declares that this equipment is in compliance with Directive

2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet

address:

https://www.compliance.sony.eu

Hereby, Sony Corporation declares that this equipment is in compliance with the UK

relevant statutory requirements.

The full text of the declaration of conformity is available at the following internet address:

https://compliance.sony.co.uk

For this radio equipment the following restrictions on putting into service or of

requirements for authorization of use apply in AT/BE/BG/CY/CZ/DK/EE/FI/FR/DE/EL/HU/

IE/IT/LV/LT/LU/MT/NL/PL/PT/RO/SK/SI/ES/SE/UK/UK(NI)/HR/IS/LI/NO/CH/AL/BA/MK/

MD/RS/ME/XK/TR:

5150 - 5350MHz band is restricted to indoor operations only.

The power delivered by the charger must be between min 2.5 Watts required by the radio

equipment, and max 27 Watts in order to achieve the maximum charging speed.

USB PD fast charging

For customers who purchased their camera from a store in

Japan that caters to tourists

Note

Some certification marks for standards supported by the camera can be confirmed on the

screen of the camera.

Select MENU 

(Setup) [Setup Option] [Certification Logo]. 

Specifications

Camera

[System]

Camera Type:

Interchangeable Lens Digital Camera

Lens: Sony E-mount lens

[Image sensor]

Image format: APS-C size,

CMOS image sensor

Number of effective pixels on camera:

Approx. 26 000 000 pixels (still

images) / approx. 19 900 000 pixels

(movies)

Total number of pixels on camera:

Approx. 27 000 000 pixels

[General]

Rated input: 7.2V , 3.2W

Operating temperature:

0 to 40 °C (32 to 104 °F)

Storage temperature:

–20 to 55 °C (–4 to 131 °F)

Dimensions (W/H/D) (Approx.):

114.8 × 67.5 × 54.2 mm

(4 5/8 × 2 3/4 × 2 1/4 in.)

Mass (Approx.):

377g (13.3oz) (including battery

pack, SD Card)

[Wireless LAN]

WW293541 (see name plate on the

bottom of camera)

Supported format:

IEEE802.11a/b/g/n/ac

Frequency band: 2.4GHz/5GHz

WW751104 (see name plate on the

bottom of camera)

Supported format: IEEE 802.11 b/g/n

Frequency band: 2.4 GHz

Rechargeable battery pack

NP-FZ100

Rated voltage: 7.2V

Design and specifications are subject to change without notice.

Additional information on this product and answers to frequently asked

questions can be found at our Customer Support Website.

Produkt Specifikationer

Mærke:	Sony
Kategori:	Kamera
Model:	ZV-E10 II

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony ZV-E10 II stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Sony Manualer

Sony ZV-E10 II Manual

25 Februar 2025

Sony Alpha A9 Manual

30 August 2024

Sony Cybershot DSC-W100 Manual

29 August 2024

Sony MVC-FDR1 Manual

26 August 2024

Sony Cybershot DSC-P200 Manual

26 August 2024

Sony Cybershot DSC-QX10 Manual

26 August 2024

Sony HXC-FB80 Manual

25 August 2024

Sony alpha DSLR-A900 Manual

25 August 2024

Sony Alpha A6700 Manual

23 August 2024

Sony Cyber-Shot DSC-W810S Manual

23 August 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB C22 Manual

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Vemer EasyEye.NOW Manual

2 April 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025

Aida HD-NDI-X20 Manual

27 Marts 2025

Hasselblad CFV II 50c Manual

27 Marts 2025

Marshall Electronics CV228 Manual

12 Marts 2025

AViPAS AV-1180 Manual

12 Marts 2025