Speco Technologies O2D3 Manual

Speco Technologies Overvågningskamera O2D3

Læs gratis den danske manual til Speco Technologies O2D3 (39 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Speco Technologies O2D3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/39

ONSIP 02P3

r’

’s

Rev.1 (Nov., 2011) .0

Note

This equipment has been tested and found to comply with the limits for a Class a digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generate, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into and outlet on a circuit dierent from that to which the receiver is

connected

 Consult the dealer or an experienced radio/TV technician for help.

Dire

DireDirections

ctions

ctionsctions

Be careful not to cause any physical damage by dropping or throwing ONSIP O2D3. Especially keep the

device out of reach from children.

Do not disassemble ONSIP O2D3. No After Service is assumed when disassembled.

Use only the power adapter provided with ONSIP O2D3.

Be careful to prevent moisture or water penetration into the unit. Particular attention is needed when

installing ONSIP O2D3. The screw holes for the installation screws and pipe should be maintained water

tight during the whole life time of the product.

All the electrical connection wires running into the unit should be prepared so that water from the outside

cannot ow into the unit through the surface of the wires. Penetration of the moisture through the wire for

extended period can cause malfunction of the unit or deteriorated image.

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Overvågningskamera
Model:	O2D3

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies O2D3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Speco Technologies Manualer

Speco Technologies O5LB1 Manual

12 Januar 2025

Speco Technologies O8B7M Manual

11 Januar 2025

Speco Technologies O2VLB7 Manual

3 September 2024

Speco Technologies VLDT3GM Manual

20 August 2024

Speco Technologies CVC624WDR Manual

19 August 2024

Speco Technologies O4iB2M Manual

18 August 2024

Speco Technologies ZIPTW4B1 Manual

18 August 2024

Speco Technologies O2ID21M Manual

17 August 2024

Speco Technologies Intensifier 2 CVC6246iHR Manual

17 August 2024

Speco Technologies O4DT1 Manual

17 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

I-PRO WV-X67301-Z4L3 Manual

17 Juni 2025

I-PRO WV-X15501-Z1LN Manual

17 Juni 2025

Hama 176613 Manual

17 Juni 2025

Kogan KAODPNTSP2D Manual

17 Juni 2025

I-PRO WV-X15501-Z3LN Manual

17 Juni 2025

I-PRO WV-X15302-Z1LN Manual

17 Juni 2025

I-PRO WV-X15302-Z1L Manual

17 Juni 2025

I-PRO WV-X15301-Z1LN Manual

17 Juni 2025

I-PRO WV-S15501-Z1LN Manual

17 Juni 2025

Hama 176576 Manual

17 Juni 2025