SPL MTC Mk2 Manual


Læs gratis den danske manual til SPL MTC Mk2 (13 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om SPL MTC Mk2, eller vil du spørge andre brugere om produktet?

Side 1/13
MTC Mk2
Monitor & Talkback Controller
Manual
Further information:
mtc-mk2.spl.audio
EN
DE
MTC Mk2
2
Getting started
Read the safety instructions starting on page11.
Make sure that the mains voltage of the MTC Mk2 mentioned in the specications
(page10) corresponds to the voltage of your region.
The power switch on the back of the MTC Mk2 must be in the o position.
(O = O / On = I).
Connect the supplied power cord to the power connector of the MTC Mk2 and to a power
outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
The devices that are to be connected to the MTC Mk2 must be be switched o.
Connect the outputs of your analog sources to the analog inputs of the MTC Mk2. Please
use appropriate audio cables (TRS, RCA).
Audio cables not included in the scope of delivery.
Connect audio cables between the MTC Mk2 and following ampliers or active monitors
(XLR, TRS).
Audio cables not included in the scope of delivery.
Connect headphones to the headphone outputs of the MTC Mk2.
Warning: Never connect a mono jack cable to the front panel stereo jack. Make sure that the stereo jack is fully inserted,
otherwise a short circuit might damage the headphone amplier.
Power on
Turn down the volume and the headphone volume of the MTC Mk2.
Switch on the power switch on the rear panel of the MTC Mk2 (On = I).
The Power LED and all activated switches light up.
Power o
Turn down the volume and the headphone volume of the MTC Mk2.
Switch o the power switch on the rear panel of the MTC Mk2 (O = O).
The Power LED and all activated switches will no longer light up.


Produkt Specifikationer

Mærke: SPL
Kategori: Ikke kategoriseret
Model: MTC Mk2

Har du brug for hjælp?

Hvis du har brug for hjælp til SPL MTC Mk2 stil et spørgsmål nedenfor, og andre brugere vil svare dig