SRS SR625 Manual


Læs gratis den danske manual til SRS SR625 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om SRS SR625, eller vil du spørge andre brugere om produktet?

Side 1/10
MODEL SR625
RUBIDIUM TIMEBASE
/ PRESCALER
1290-D Reamwood Avenue
Sunnyvale, CA 94089 U.S.A.
Phone: (408) 744-9040, Fax: (408) 744-9049
email: infor@thinkSRS.com www.thinkSRS.com
Copyright © 1994 by SRS
All Rights Reserved
Revision 2.1 (07/2001)
1
Safety and Preparation for Use
This instrument may be damaged if
operated with the LINE VOLTAGE
SELECTOR set for the wrong ac line
voltage or if the wrong fuse is installed.
LINE VOLTAGE SELECTION
The SR625 operates from a 100V, 120V,
220V, or 240V nominal ac power source
having a line frequency of 50 or 60 Hz.
Before connecting the power cord to a power
source, verify that the LINE VOLTAGE
SELECTOR card, located in the rear panel
fuse holder, is set so that the correct ac input
voltage value is visible.
Conversion to other AC input voltages
requires a change in the fuse holder voltage
card position and fuse value. Disconnect the
power cord, open the fuse holder cover door
and rotate the fuse-pull lever to remove the
fuse. Remove the small printed circuit
board and select the operating voltage by
orienting the board so that the desired
voltage is visible when it is pushed firmly
back into its slot. Rotate the fuse-pull lever
back into its normal position and insert the
correct fuse into the fuse holder.
LINE FUSE
Verify that the correct line fuse is installed
before connecting the line cord. For
100V/120V, use a 1 Amp slow blow fuse
and for 220V/240V, use a 1/2 Amp slow
blow fuse.
LINE CORD
The SR625 has a detachable, three-wire
power cord for connection to the power
source and to a protective ground. The
exposed metal parts of the instrument are
connected to the outlet ground to protect
against electrical shock. Always use an
outlet which has a properly connected
protective ground.
WARNING: Dangerous voltages, capable of causing death, are present in this instrument.
Use extreme caution whenever the instrument covers are removed.


Produkt Specifikationer

Mærke: SRS
Kategori: Ikke kategoriseret
Model: SR625

Har du brug for hjælp?

Hvis du har brug for hjælp til SRS SR625 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret SRS Manualer

SRS

SRS SIM928 Manual

21 August 2024
SRS

SRS SIM984 Manual

17 August 2024
SRS

SRS SR470 Manual

15 August 2024
SRS

SRS EC301 Manual

14 August 2024
SRS

SRS PRS10 Manual

14 August 2024
SRS

SRS FS752 Manual

13 August 2024
SRS

SRS SR630 Manual

13 August 2024
SRS

SRS FS725 Manual

12 August 2024
SRS

SRS NL100 Manual

11 August 2024
SRS

SRS DG535 Manual

11 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer