Vaxcel T0249 Manual

Vaxcel Ikke kategoriseret T0249

Læs gratis den danske manual til Vaxcel T0249 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel T0249, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0606 / T0249 / T0326

Maximum Wattage: 60W Incandescent Bulb or 20W LED

Dimmable Bulb.

Work Temperature: - 4°F~104°F

1. Read all instructions carefully before installation and

operation.

2. If you are not familiar with state and local electrical codes

it is recommended that you consult with a qualified

electrician.

3. Before installation, shut off power at the main fuse or

circuit breaker box. Be aware that simply turning off the

wall switch is not sufficient to prevent an electrical shock.

4. This fixture requires a 120V AC, 60 Hz power source.

5. Do not attempt to take the lantern apart; there are no

serviceable parts inside.

6. To avoid sensor damage by lightning or electrical surge,

make sure the grounding wire is securely connected.

7. For general safety and to avoid any possible damage to

the sensor, be sure the power is switched "off" before

replacing the bulb.

8. Compatible with most LED dimmable bulb.

Hardware Package (included)：

Important to Know

Features

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read

and save these instructions.

Max. 60W Type A Bulb

(not include)

End Cap (D)

Rubber Pad (E)

Backplate

Mounting Screw (B)

Fixture Wire

Mounting Strap Unit (A)

Wire Connector (C)

Fixture Grounding Wire

Green Grounding Screw

Outlet Box

House Grounding Wire

Threaded pipe

Mounting Screw (B)

Wire Connector (C) End Cap (D)

Mounting Strap Unit (A)

Rubber Pad (E)

Page 1 / 5

1. Energy saving fixture.

2. Use dim-to-full brightness where dim-illumination

is preferred, such as your front entrance. Use

off-to-full brightness where off/on illumination is

preferred, such as your backyard.

3. When in manual override mode, use wall switch

to keep the light ON till dawn.

230727

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Ikke kategoriseret
Model:	T0249

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel T0249 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vaxcel Manualer

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

Vaxcel OF33412 Manual

18 December 2025

Vaxcel T0371 Manual

18 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Brondell LumaWarm L60 Manual

18 December 2025

Bravilor Bonamat Bolero 32 CS Manual

18 December 2025

Foscam SD8EP Manual

18 December 2025

Dals DCP-LWS19 Manual

18 December 2025

TOTO TS110J1 Manual

18 December 2025

ORNO OR-CR-298 Manual

18 December 2025

Wine-Mate WM-4500SSLWC Manual

18 December 2025

Aqprox appLS05HD2D Manual

18 December 2025

Silverstone EBA02 Manual

18 December 2025

Aqprox appLS02AS Manual

18 December 2025