Stairville DJ Lase BlueStar MK-II LED Manual
Stairville
Laser pointer
DJ Lase BlueStar MK-II LED
Læs gratis den danske manual til Stairville DJ Lase BlueStar MK-II LED (52 sider) i kategorien Laser pointer. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Stairville DJ Lase BlueStar MK-II LED, eller vil du spørge andre brugere om produktet?
Side 1/52

DJ Lase
BlueStar MK-II LED
showlaser
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
05.08.2020, ID: 262778 (V4)

Table of contents
1 General information 5.................................................................................................................................
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions 10..................................................................................................................................
3 Features 19.......................................................................................................................................................
4 Installation 20..................................................................................................................................................
5 Starting up 25..................................................................................................................................................
6 Connections and controls 28...................................................................................................................
7 Handling 33......................................................................................................................................................
7.1 Starting and stopping the device............................................................................................... 33
7.2 Main menu.......................................................................................................................................... 34
7.3 Menu overview................................................................................................................................. 38
7.4 Functions in DMX mode................................................................................................................ 39
8 Technical 42specications.......................................................................................................................
Table of contents
DJ Lase BlueStar MK-II LED
3

9 Plug and connection assignments 45..................................................................................................
10 Troubleshooting 46......................................................................................................................................
11 Cleaning 48.......................................................................................................................................................
12 Protecting the environment 49..............................................................................................................
Table of contents
showlaser
4

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under .www.thomann.de
General information
DJ Lase BlueStar MK-II LED
5

1.1 Further information
On our website ( you will lots of further information and details on thewww.thomann.de) nd
following points:
Download This manual is also available as PDF for you to download.le
Keyword search Use the search function in the electronic version to the topics ofnd
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
showlaser
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: control, button.[VOLUME] [Mono]
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: , .‘24ch’ ‘OFF’
1.3 Symbols and signal words
In this section you will an overview of the meaning of symbols and signal words that arend
used in this manual.
Letterings
Displays
General information
DJ Lase BlueStar MK-II LED
7

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – laser radiation.
General information
showlaser
8

Warning signs Type of danger
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
General information
DJ Lase BlueStar MK-II LED
9

2 Safety instructions
This unit is used to project laser light it is intended for show applications only. Use theeects;
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with physical, sensorial, and intellectualsucient
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent switching
on and The device is not suitable for continuous operation.o.
Intended use
Safety instructions
showlaser
10

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
showlaser
12

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or If in doubt, seek advice from a regis‐re.
tered electrician.
DANGER!
Laser radiation – avoid exposure to beam
The device contains a class-3B laser, according to EN 60825-1:2015. Doclassied
not look into the laser beam. The laser beam can injure your eyes when you
directly look into it. Do not expose yourself to the laser beam. The laser beam can
cause skin burns.
In this context take extreme care when using converging optical instruments.
Safety instructions
DJ Lase BlueStar MK-II LED
13

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
DJ Lase BlueStar MK-II LED
15

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions in the chapterspecied
‘Technical of this user manual. Avoid heavy temperature specications’ uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature (for example after transport at low outside temperatures).uctuations
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
showlaser
16

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC and after someoor
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the but use felt-padoor,
oor protectors or a carpet.
Safety instructions
DJ Lase BlueStar MK-II LED
17

NOTICE!
Possible damage due to installation of a wrong fuse
The use of types of fuses can cause serious damage to the unit. Firedierent
hazard!
Only fuses of the same type may be used.
Safety instructions
showlaser
18

3 Features
The showlaser is specially suited for discos, clubs, bars, small stages, etc. It allows smooth inte‐
gration into light shows, but can also be operated as stand-alone device. The two laser diodes
together with the LED background illumination provide extraordinary special eects.
Special features of the device:
nControl via DMX (7 channels) and via buttons and display on the unit
nBuilt-in automatic show programmes
nSound control
nMaster / slave mode
nLaser diodes:
– Red: 100 mW
– Green: 40 mW
nBlue LED background illumination with projection lens
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
DJ Lase BlueStar MK-II LED
19

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Installation
showlaser
20

Connect the external safety switch (not supplied) to the provided connection socket on the
device. If you press the external switch, the laser beam will be switched immediately.o
Observe the safety instructions of the switch manufacturer and the regulations for the
intended use.
Safety switch (emergency stop)
Installation
DJ Lase BlueStar MK-II LED
21

In order to meet the limits for maximum irradiation (MZB limit value for the non-hazardous
irradiation of the eye or the skin with a laser), the device must be installed at a height of at
least 2.7 m according to the BGV-B2 valid in Germany.
The determination of the MZB limit values depends on the environmental conditionsspecic
in individual cases and must be carried out by the responsible laser protection representative
on site, based on the applicable standard DIN EN 60825-1.
Minimum height
Installation
showlaser
22

WARNING!
Stray laser radiation
Inadequately secured additional components may cause stray laser radiation.
Make sure that all additional components are adequately secured.
NOTICE!
Risk of overheating
The distance between the light output and the illuminated surface must be more
than 2.0 m (78.7 in).
Always ensure ventilation.sucient
The ambient temperature must always be below 40 °C (104 °F).
Installation
showlaser
24

5 Starting up
Create all connections while the device is Use the shortest possible high-quality cables foro.
all connections. Take care when running the cables to prevent tripping hazards.
DANGER!
Laser radiation
Follow the instructions in the chapter titled "Safety Instructions" in this manual.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
Starting up
DJ Lase BlueStar MK-II LED
25

When you a group of devices in master/slave mode, the unit will control thecongure rst
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the slave device. Then connect the DMX output of the slave device torst rst
the DMX input of the second slave device and so on.
Connections in master/slave
mode
Starting up
DJ Lase BlueStar MK-II LED
27
Produkt Specifikationer
Mærke: | Stairville |
Kategori: | Laser pointer |
Model: | DJ Lase BlueStar MK-II LED |
Har du brug for hjælp?
Hvis du har brug for hjælp til Stairville DJ Lase BlueStar MK-II LED stil et spørgsmål nedenfor, og andre brugere vil svare dig
Laser pointer Stairville Manualer
19 August 2024
18 August 2024
18 August 2024
25 December 2023
23 December 2023
14 Juli 2023
5 Marts 2023
19 November 2022
5 November 2022
22 Oktober 2022
Laser pointer Manualer
- Leica
- DeWalt
- GPO
- Black And Decker
- Perfect Choice
- Stanley
- Steren
- Einhell
- BeamZ
- Eurolite
- Picotronic
- Cameo
- Vortex
- Laserworld
- Stabila
Nyeste Laser pointer Manualer
15 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025