StarTech.com 1B-WALL-MOUNT-SHELF Manual

StarTech.com Ikke kategoriseret 1B-WALL-MOUNT-SHELF

Læs gratis den danske manual til StarTech.com 1B-WALL-MOUNT-SHELF (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om StarTech.com 1B-WALL-MOUNT-SHELF, eller vil du spørge andre brugere om produktet?

Side 1/4
Quick-Start Guide
Manual Revision: May 16, 2024 9:53 AM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product IDs
1B-WALL-MOUNT-SHELF / 2B-WALL-MOUNT-SHELF
Component Function
1Glass Shelf Place or other media equipmentA/V Accessories
Allows along the Height Adjustment Wall Bracket
2Side Covers
Decorative panels with to help with cable Grooves
management
Attach directly onto the Wall Bracket
3End Caps
Placed at the and of the Top Bottom Side Covers
Small can be broken-o to pass-trough cables for the Tabs
mounted equipment
Product Information
For the latest manuals, product information, technical specications, and declarations
of conformance, please visit:
www.StarTech.com/1B-WALL-MOUNT-SHELF
www.StarTech.com/2B-WALL-MOUNT-SHELF
Requirements
Phillips Head Screwdriver
Electric Drill and 5/32in [4mm] or 5/16in [8mm] Drill Bits (Optional)
Electronic Stud Finder (Optional)
Wall-Mount Floating Shelf for A/V Accessories
Spirit/Bubble Level (Optional)
Pencil (Optional)
Package Contents
Product ID 1B-WALL-MOUNT-SHELF 2B-WALL-MOUNT-SHELF
Glass Shelf ( )A1 2
Support Brackets ( )B1 2
Wall Bracket ( )C1 1
Side Covers ( )D2 4
M4x6mm Screws ( )E2 4
M5x14mm Screws ( )F2 4
M6x8mm Screws ( )G4 8
Wall Mounting Screws ( )H3 4
Wall Anchors ( )I3 4
Endcaps ( )J2 2
Mounting Plate, Large ( )K1 2
Mounting Plate, Small ( )L1 2
Quick-Start Guide 1 1
Warnings!
StarTech.com Ltd. is not responsible for any property damage and/or personal injury
resulting from the installation procedures outlined in this technical document.
Read the entire manual and ensure the instructions are fully understood before
assembling and/or using this product.
This product is designed to be installed on wooden studded, solid concrete, or
cinder block walls only.
Before adding equipment to this product, ensure this product has been properly
mounted.
Never operate this product if parts are missing or damaged.
The mounting hardware included with this product might not be adequate for some
wall structures. If lacking the necessary expertise to wall mount this product, contact
a construction professional to install the wall mount or to provide specic mounting
instructions for the wall structure.
Ensure the weight of the equipment does not exceed the weight capacity of this
product. If the weight capacity is exceeded, personal injury or damage to the
*1B-WALL-MOUNT-SHELF shown. Product may vary from image
2
3
1
equipment are possibilities. These products can support the following weight:
up to 7kg (15.4lb).
Ensure the type of wall structure and mounting hardware will properly support
the mounted equipment. Failure to do so might result in personal injury and/or
equipment damage. The wall structure should be capable of supporting at least four
times the weight of the mounted equipment.
Installation
Assembly
1B-WALL-MOUNT-SHELF (left) 2B-WALL-MOUNT-SHELF (right)
1
2
Wall Mounting
1B-WALL-MOUNT-SHELF (left) )2B-WALL-MOUNT-SHELF (right)
Wooden Stud Wall or Concrete/Cinder Block Wall
1
Wooden Stud Wall
H
Or
E D D
C C
Or
BF
L
K
G
A
Repeat p2-x2 for 2B-WALL-MOUNT-SHELF
H


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Ikke kategoriseret
Model: 1B-WALL-MOUNT-SHELF

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com 1B-WALL-MOUNT-SHELF stil et spørgsmål nedenfor, og andre brugere vil svare dig