StarTech.com 1G-NETWORK-ISOLATOR Manual

StarTech.com Ikke kategoriseret 1G-NETWORK-ISOLATOR

Læs gratis den danske manual til StarTech.com 1G-NETWORK-ISOLATOR (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om StarTech.com 1G-NETWORK-ISOLATOR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: September 9, 2024

Product ID

1G-NETWORK-ISOLATOR

Front View

Bottom View

Rear View

1-Port Gigabit Galvanic Network Isolator

Port/Connector Function

1RJ45 Port 1

• Connect an RJ45 Ethernet Cable

• Supported speeds: 1Gbps, 100Mbps, and 10Mbps

• The port is bidirectional

2DIN Rail

Mounting Point • Use to secure the included DIN Rail Mounting Kit

3Guide Peg • Helps to install the in one specic DIN Rail Mounting Kit

orientation

4RJ45 Port 2

• Connect an RJ45 Ethernet Cable

• Supported speeds: 1Gbps, 100Mbps, and 10Mbps

• The port is bidirectional

Package Contents

• Network Isolator x 1

• Adhesive Strip x 1

• DIN Rail Mounting Kit x 1

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/1G-NETWORK-ISOLATOR

• Phillips head screwdriver

Installation

1. Connect the network to one of the of the Input RJ45 Ethernet Cable RJ45 Ports

Network Isolator.

2. Use an to connect the remaining on the RJ45 Ethernet Cable RJ45 Port Network

Isolator RJ45 Port Networked Device to an of the .

DIN Rail Mounting (optional)

1. Use the at the bottom of the to align the Guide Peg Network Isolator

DIN Rail Mounting Kit Phillips Head Screwdriveinto it’s correct position. Use a r to

install th and secure the . (Figure 1) e Self-Tapping Screw DIN Rail Mounting Kit

*Product may vary from image

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

À DÉPOSER

EN MAGASIN À DÉPOSER

EN DÉCHÈTERIE

Points de collecte sur www.quefairedemesdechets.fr

Privilégiez la répara�on ou le don de votre appareil !

Cet appareil,

ses accessoires

et cordons

se recyclent

Figure 1

2. Mount the r by inserting the onto the Networking Isolato Mounting Plate DIN Rail

at an angle, starting from the top then push against the . (Figure 2) DIN Rail

Surface Mounting (optional)

1. Remove one of the protective backings from the .Adhesive Strip

2. Attach the to the back of the by applying light Adhesive Strip Network Isolator

pressure for a few seconds.

3. Remove the remaining protective backing from the .Adhesive Strip

4. Firmly attach the to a clean at surface.Network Isolator

Quick-Start Guide

Figure 2

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a dierent circuit than the receiver.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the device. If shielded interface cables are included with the product, or if additional components or accessories

are designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement / Déclaration d’ISDE

CAN ICES-003(B) / NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

EU CE EMC/EMI

StarTech.com hereby declares that this device complies with the Electromagnetic Compatibility Directive (EMC).

A copy of the EU Declaration of Conformity is available at under the Product

www.StarTech.com/1G-NETWORK-ISOLATOR

Support tab.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes

only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to

which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks,

registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related

documents are the property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	1G-NETWORK-ISOLATOR

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com 1G-NETWORK-ISOLATOR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret StarTech.com Manualer

StarTech.com IES51GPOEPD Manual

9 Juni 2025

StarTech.com I51G-ETHERNET-SWITCH Manual

8 Juni 2025

StarTech.com 35S24M2NGFF Manual

8 Juni 2025

StarTech.com DS51002EU Manual

8 Juni 2025

StarTech.com IDE35252X Manual

8 Juni 2025

StarTech.com BRACKET125PTP Manual

7 Juni 2025

StarTech.com IES8100POE Manual

7 Juni 2025

StarTech.com SATA35252X Manual

7 Juni 2025

StarTech.com 25SAT35HDD Manual

7 Juni 2025

StarTech.com SATDUPUE Manual

7 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ENTES GEMO-10-DR-4G Manual

14 Juni 2025

Marshall VAC-12SH Manual

14 Juni 2025

Rane MX 22 Manual

14 Juni 2025

Vulcan VCH88 Manual

14 Juni 2025

Fluke SB140 Manual

14 Juni 2025

Blodgett BCT-101G Manual

14 Juni 2025

Rival 11570 Manual

14 Juni 2025

CDN MT1 Manual

14 Juni 2025

Savage Bros. FireMixer-14 Manual

14 Juni 2025

HMS Premium STR01 Manual

14 Juni 2025