StarTech.com 21050-PC-SERIAL-CARD Manual

StarTech.com Ikke kategoriseret 21050-PC-SERIAL-CARD

Læs gratis den danske manual til StarTech.com 21050-PC-SERIAL-CARD (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om StarTech.com 21050-PC-SERIAL-CARD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 24, 2022

Product Diagram (21050-PC-SERIAL-CARD)

Port/LED/

Connector Function

1Bracket • Used to secure the card on the Host Computer

2Serial Ports DB-9 • Connect Serial Peripheral Devices

3Activity LEDs • Receive Transmit LEDs Green and illuminate when

there’s activity

4J2 Jumpers • Used to or power output. The Enable Disable Pin 9

default position is Disable

5J5 Power

Connector

• Optional: connect the Host Computer Power Supply

(4 Pin SP4/Floppy power connector) to Provide Power

over PIN 9

6J3 Jumper

• Optional: used to change the voltage output of Pin 9

• PCI12V 12V draws power from the PCIe slot. Outputs

• AUX12V J5 Power Connector. draws power from the

Outputs 12V

• AUX5V J5 Power Connector. draws power from the

Outputs 5V

7PCIe 2.0 p1-x1

Connector • Insert into a on thePCI Express Slot Host Computer

2-Port PCI Express Serial Card with COM Port Activity LEDs - 16C1050 UART

Package Contents

• Serial Parallel PCI Express Card x1

• Low-Prole Bracket x2

• Quick-Star Guide x1

Requirements

For the latest requirements, please visit www.startech.com/21050-PC-SERIAL-CARD

• Computer with an available PCI Express Slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

PCI Express Cards can be severely damaged by static electricity. Ensure that you

are properly grounded before you open your or touch the Computer Case PCI

Express Card Anti-Static Strap . You should wear an when you install any computer

component. If an isn’t available, discharge any built-up static Anti-Static Strap

electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and don’t touch the gold connectors.PCI Express Card

1. Turn o your and any that are connected to it (for Computer Peripheral Devices

example, , , .).Printers External Hard Drives etc

2. Unplug the from the back of your .Power Cable Computer

3. Disconnect any that are connected to your .Peripheral Devices Computer

4. Remove the from your . Consult the documentation that Cover Computer Case

came with your for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate

from the back of your . Consult the documentation that came Computer Case

with your for details about how doing this safely. This card works in PCI Computer

Express x1, x4, x8, or p1-x16 slots.

6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot

Bracket Computer Case to the back of the .

Note:

Note: If you install the

If you install the

If you install the If you install the PCI Express Card

PCI Express Card

PCI Express Card PCI Express Card into a

into a

into a into a Small Form Factor

Small Form Factor

Small Form Factor Small Form Factor or a

or a

or a or a Low-Prole

Low-Prole

Low-Prole Low-Prole

Desktop System

Desktop SystemDesktop System, it’s necessary to replace the pre-installed standard

, it’s necessary to replace the pre-installed standard

, it’s necessary to replace the pre-installed standard , it’s necessary to replace the pre-installed standard Full-

Full-

Full-Full-Height

Height

Height Height

Bracket

Bracket with the included

with the included

with the included Low-Prole Bracket

Low-Prole Bracket

Low-Prole Bracket. The

. The

. The Serial Port DB-9

Serial Port DB-9

that uses the

Ribbon Cable

Ribbon CableRibbon Cable

needs to be installed on a separate

needs to be installed on a separate needs to be installed on a separate Low-Prole Bracket

Low-Prole Bracket

Low-Prole BracketLow-Prole Bracket .

. .

3. Conrm that the is installed and working as expected.Driver

Verify Driver Installation (Linux)

1. Run from the command line.lsmod | grep r8125

2. Verify that the is present in the command line. Driver

7. To provide power over connect a from Pin 9, 4 Pin SP4/Floppy power connector

the to the on the card.Host Computer Power Supply J5 Power Connector

a. To set the desired voltage, or , insert the jumper cap on the corresponding 5V 12V

labeled 2-pin connector on the . J3 Jumper

Note: Verify the supports additional voltage on before Serial Peripheral Device Pin 9

making changes. Severe damage to the equipment can occur.

8. Change the jumper caps of from (disabled) (power)J2 Jumpers DIS Pins 1-2 to PWR

Pins 2-3.

9. Return the onto your .Cover Computer Case

10. Reconnect the to the back of your .Power Cable Computer

11. Reconnect all of the that were disconnected in .Peripheral Devices Step 3

12. Turn on your .Computer

Install the Driver

1. Navigate to www.startech.com/21050-PC-SERIAL-CARD

2. Click the tab.Drivers/Downloads

3. Under , download the for your operating system.Driver(s) Driver Package

4. Open the and locate the corresponding folder for theDriver Package Operating

System Version.

5. Execute the to install the driver package to your computer.Setup File

Verify Driver Installation (Windows)

1. Navigate to the .Device Manager

2. Under , right-click and Ports (COM & LPT) AX99100 PCIe to High Speed Serial Port

click . Properties

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	21050-PC-SERIAL-CARD
Bredde:	65 mm
Dybde:	67 mm
Højde:	18 mm
Vægt:	51 g
Produktfarve:	Gul
Pakkevægt:	200 g
Pakkedybde:	144 mm
Pakkebredde:	207 mm
Pakkehøjde:	38 mm
Opbevaringstemperatur (T-T):	-40 - 75 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 55 °C
Hurtig installationsvejledning:	Ja
LED-indikatorer:	Aktivitet
Harmoniseret systemkode (HS):	84733020
Bæredygtighedscertifikater:	CE, RoHS
Understøttede Linux-operativsystemer:	Ja
Hovedkassen højde (udvendigt):	340 mm
Hovedkassens længde (udvendigt):	440 mm
Hovedkassens bredde (udvendigt):	530 mm
Værtsgrænseflade:	PCIe
Intern:	Ja
Produkter pr. hovedkasse (udvendigt):	50 stk
Understøttede operativsystemer til servere:	Windows Server 2016, Windows Server 2019
Monteringsbeslag inkluderet:	Ja
Flowkontrol support:	Ja
Seriel grænsefladetype:	RS-232
Antal serielle porte:	2
Baud hastighed:	921.6 Kbit/s
Data-bits:	5, 6,7, 8,9
Output-grænseflade:	Seriel
Udvidelseskort standard:	PCI 2.0
Udvidelseskort formfaktor:	Fuld højde/ lav profil
Chipsæt:	ASIX - AX99100, ASIX - ZT3243LFEY
FIFO (først ind, først ud):	256 B
Paritetsbit:	Even, Mark, N,Odd, Space