StarTech.com 2M2-REMOVABLE-PCIE Manual

StarTech.com Ikke kategoriseret 2M2-REMOVABLE-PCIE

Læs gratis den danske manual til StarTech.com 2M2-REMOVABLE-PCIE (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om StarTech.com 2M2-REMOVABLE-PCIE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 3, 2024

Product ID

2M2-REMOVABLE-PCIE

Component Function

1Full-Prole Bracket • Secure the to the M.2 NVMe SSD Backplane

Computer Case

2M.2 Drive Trays • Hosts the for the M.2 Drives M.2 NVMe SSD

Backplane

3Active Cooling Fans Vents air away from the • M.2 NVMe Drives

4PCIe p1-x8 Connector • Connect the to a M.2 NVMe SSD Backplane PCIe

Slot Computer in the

5Key Lock for Drive Tray • Use the included to Lock or Unlock the Key M.2

Drive Trays M.2 NVMe SSD Backplane from the

6Drive LED Indicator

• Red: Connected Drive is Not Supported

• Green: Connected Drive is Supported

• Yellow: Flashes to indicate Drive Activity

Dual-Bay M.2 NVMe SSD Backplane for PCIe p1-x8 Slot with Bifurcation

Product Information

For the latest drivers/software, technical specications, and declarations of

conformance, please visit: www.StarTech.com/2M2-REMOVABLE-PCIE

Package Contents

• Dual-Bay M.2 NVMe SSD Backplane x 1

• Removable M.2 Drive Tray x 2

• M.2 Drive Mounting Screw x 2

• Set of Keys x 1

• Quick-Start Guide x 1

Requirements

• Computer x 1

• PCIe p1-x8 or p1-x16 Slot with Bifurcation support

• PCI Express M.2 SSD x 2

• Phillips Head Screwdriver x 1

Installation

Warning: PCIe Cards can be damaged by static electricity. Ensure that the Installer

is properly grounded before they open the Computer Case or touch the M.2 NVMe

SSD Backplane. The Installer should wear an Anti-Static Strap when installing any

computer component. If an Anti-Static Strap is not available, discharge any built-up

static electricity by touching a large Grounded Metal Surface for several seconds.

Only handle the M.2 NVMe SSD Backplane by its edges and do not touch the gold

connectors.

Note: Consult the documentation that came with the Computer/Motherboard for

details regarding how to enable and congure PCIe Bifurcation.

Install the M.2 Storage Drives

1. Remove the from the Drive Tray M.2 NVMe SSD Backplane

2. Remove the from the by pressing the two Heat Sink Cover Removable Drive Tray

Plastic Heat Sink Latching Locks, located near the back of the tray, towards each

other.

3. Place the next to the and note the that Drive Drive Tray Adjustable Stando Holes

match the length of the .Drive

4. Remove the Adjustable by pressing the side of the Adjustable Stando and Stando

sliding it towards the front of the tray.

5. Install the in the that matches the length of the Stando Adjustable Stando Holes

Drive.

6. Insert the into the Drive Removable Drive Tray’s M.2 Connector

Note: The M.2 Connector on the Drive is M-Keyed so that it only ts M-Keyed NVMe

M.2 Storage Devices

7. Gently slide the into the of the , and M.2 Drive Connector M.2 Connector Drive Tray

press the down toward the adapter until the is properly seated.Drive Drive

5 6 5 6

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Install the Drive Trays

Note: Hot swapping the drives while the computer is turned on is dependent on the

Computer/Motherboard. Please consult with the manufacturer regarding PCIe Hot

Swap support.

1. Ensure the is in the position. Drive Tray Lock Unlocked

2. Align the with the located on the Drive Tray Drive Tray Bay M.2 NVMe SSD

Backplane Computer at the rear of the .

3. Gently insert the until it is fully inserted.Drive Tray

Note: Make sure the drive tray is fully inserted before closing the latch. If inserted

properly, the drive tray will be ush with the PCIe bracket. If the drive tray is inserted

incorrectly, the drive tray will protrude from the PCIe bracket and the drive tray will not

make full contact in the drive bay.

4. Use one of the included to the in place.Keys Lock Drive Tray

5. Repeat for the second . Steps 1 - 4 M.2 NVMe Drive

6. Reconnect the to the rear of the .Power Cable Computer

7. Power on the and all connected .Computer Peripheral Devices

8. (Optional) Install the to secure the in place.Drive Mounting Screw Drive

9. Replace the Heat Sink Cover.

10. Repeat for the second .Steps 1 - 9 M.2 NVMe Drive

Install the M.2 NVMe SSD Backplane

1. Turn o the and disconnect the and any Computer Power Cable Peripheral Devices

that are connected (e.g. printers, external hard drives, etc.).

2. Remove the from the .Cover Computer Case

Note: Consult the documentation that came with the Computer for details about how

to do this safely.

3. Locate an open that supports PCIe Bifurcation and remove the PCIe p2-x8 or x16 Slot

corresponding from the rear of the . In most Metal Cover Plate Computer Case

instances, the is attached to the rear of the with a Metal Cover Plate Computer Case

single . Save this for the next step.Phillips Head Screw Phillips Head Screw

4. Gently insert the into the open and M.2 NVMe SSD Backplane PCIe p2-x8 or x16 Slot

fasten the to the rear of the , using the Bracket Computer Case Phillips Head Screw

from . Step 4

5. Replace the from the that was removed in .Cover Computer Step 2

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	2M2-REMOVABLE-PCIE

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com 2M2-REMOVABLE-PCIE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret StarTech.com Manualer

StarTech.com ST124HDMI2 Manual

18 August 2025

StarTech.com S352BU33RER Manual

15 August 2025

StarTech.com SAT3540U2E Manual

15 August 2025

StarTech.com FCREADMICRO3V2 Manual

28 Juli 2025

StarTech.com USB312SAT3 Manual

23 Juli 2025

StarTech.com PIB2M21 Manual

23 Juli 2025

StarTech.com P10Q4C-USB-CARD-LP Manual

14 Juli 2025

StarTech.com IH2006-KVM-EXTENDER Manual

5 Juli 2025

StarTech.com N2-M2-SSD-DUPLICATOR Manual

20 Juni 2025

StarTech.com IES61002POE Manual

16 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tefal Lighted Mirror MR4015 Manual

20 August 2025

Stiebel Eltron CWM P Manual

20 August 2025

Globe XPH Manual

20 August 2025

Accucold AWC2PB Manual

20 August 2025

Scheppach CSP5300 SE Manual

20 August 2025

AccuTemp Evolution N61201D060 Manual

20 August 2025

Scheppach C-BSB74/1BE-X Manual

20 August 2025

Deye SUN-7.6K-SG02LP2-EU-AM2 Manual

20 August 2025

Scheppach Therbio Manual

20 August 2025

Krups Pulseo KB17GD Manual

20 August 2025