StarTech.com 35SAT225S3R Manual

StarTech.com Ikke kategoriseret 35SAT225S3R

Læs gratis den danske manual til StarTech.com 35SAT225S3R (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om StarTech.com 35SAT225S3R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: January 15, 2019 11:50 AM

Product Diagram (35SAT225S3R)

Port Function

Front

1Front Button • Used to open the , giving the user Front Door

access to the .SATA Drive Slot

2Front Door • Used to secure the in the SATA Drive SATA

Drive Slot.

Port Function

Back

3SATA Power Port • Used to connect a to the Power Supply

Converter.

4RJ-45 Port • Used to connect the to a Converter

Computer’s Motherboard.

Dual-Bay 2.5” to 3.5” SATA SSD/HDD Converter | RAID

5RAID Switch

Redundant Array of Independent Disks (RAID)

combines disk drive components to reduce

redundancy and increase performance.

• Combines the free space on multiple disk BIG:

drives.

• Data Mirroring without parity or RAID1:

stripping.

• Data Stripped without mirroring or RAID0:

parity.

• Just a bunch of drives, multiple disk JBOD:

drives operating independently.

Requirements

For the latest requirements and full manual, please visit www.startech.

com/35SAT225S3R.

Insert a drive into the converter

Warning! Drives should be handled carefully. If you’re not careful with your drives,

you may lose data as a result.

1. Push in on the side of the Front button and lift the Front door away from the

converter.

2. Gently slide the SATA connector on the drive into the corresponding connector on

the converter.

Note: The connector on your drive is keyed so that it only ts in the adapter one way.

3. If necessary, repeat steps 1 and 2 to install a second drive.

4. Push the Front door closed.

Install the converter in a computer

1. Turn o the computer that you want to install the converter into.

2. Open your computer case. For more information about how to do this properly,

consult the documentation that came with your computer system.

3. Insert the converter into the 3.5 in. drive slot in your computer.

4. Insert two of the mounting screws through the side of the drive slot and into the

side of the converter.

345

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

• Click the Start button or Windows icon. Enter compmgmt.msc and press Enter.

2. On the Computer Management screen, click Disk Management.

3. A dialog window appears that asks you to initialize the drive. Depending on the

version of Windows that you’re running, you have the option to create either an

MBR or a GPT disk.

Note: GPT (GUID partition) is required for drives that are larger than 2 TB, but GPT isn’t

compatible with some earlier versions of operating systems. MBR is supported by both

earlier and later versions of operating systems.

4. Locate the disk that is labeled as . To conrm that the drive is the Unallocated

correct one, check the drive capacity.

5. Right-click the section of the window that says and click . Unallocated New Partition

6. To initialize the drive in the format of your choice, complete the on-screen

instructions. When the drive is successfully installed, it appears under My Computer

or with a drive letter assigned to it.Computer

Mac OS

1. Do one of the following:

• In Spotlight, enter Disk Utility.

• Open Finder. Navigate to Applications and click Utilities. Open Disk Utility.

2. Select the new drive and click the Partition tab.

3. Enter a name for the partition.

4. Click Apply.The drive should now appear on your desktop and be accessible in

Finder.

About the LED indicators

LED behavior Signicance

Solid Orange Top drive failure

Solid Blue Bottom drive failure

Flashing Blue RAID1 is being rebuilt

5. Insert the remaining two mounting screws through the other side of the drive slot

and the converter.

6. Connect the SATA power connector from the computer’s power supply to the SATA

power port on the converter.

7. Connect a SATA cable to a SATA port on the computer’s motherboard and to the

SATA data port on the computer.

8. Replace the cover on your computer case and turn it on.

Prepare a drive for use

Warning! When you complete the following steps, all of the data on your drive will be

deleted. If your drive has data on it that you require, you should create a backup le or

use a dierent drive.

Windows® OS

If you install a drive that already has data on it, after you insert the drive, it appears

under My Computer or Computer with a drive letter assigned to it. If you install a brand-

new drive that doesn’t contain any data, you must prepare the drive for use.

1. Depending on the version of OS that you’re running, do one of the following:

• On your desktop, right-click My Computer and click Manage.

• On your desktop, right-click Computer and click Manage.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Ikke kategoriseret
Model:	35SAT225S3R
Type:	Bærerpanel
Bredde:	102 mm
Dybde:	146 mm
Højde:	26 mm
Vægt:	223 g
Produktfarve:	Sort, sølv
Produkttype:	HDD/SSD kabinet
Pakkevægt:	270 g
Pakkedybde:	116 mm
Pakkebredde:	112 mm
Pakkehøjde:	35 mm
Opbevaringstemperatur (T-T):	-20 - 55 °C
Relativ luftfugtighed ved drift (H-H):	5 - 65 %
Driftstemperatur (T-T):	0 - 55 °C
Hurtig installationsvejledning:	Ja
Materiale:	Aluminium, Plastic
Certificering:	CE, FCC, UL
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	84733080
USB-tilslutning:	Ingen
Bæredygtighedscertifikater:	RoHS
HDD-grænseflade:	Serial ATA, Serial ATA II, Serial ATA III
Antal blæsere:	0 blæser(e)
Størrelse på lagerdisk:	2.5 "
Antal understøttede lagerdiske:	2
Skruer inkluderet:	Ja
Dataoverførselshastighed:	6 Gbit/sek.
Størrelse:	3.5 "
HDD-størrelse:	2.5 "
Antal understøttede HHD'er:	2
Understøttede lagerdrev brugerflader:	Serial ATA, Serial ATA II, Serial ATA III
RAID-niveauer:	0, 1,BIG, JBOD
Chipsæt:	ASMEDIA - ASM1092R
Nøglelås:	Ingen
Understøttede lagerdisk højder:	9.5 mm
Port multiplikator:	Ingen
Antal eksterne SATA-porte:	1